Buy flat drive belts. Flat drive belts for machine tools made of polyamide Flat endless belts
Belts for machine tools are an important element in the operation of equipment. This technical part is an indispensable element of the machine:
drilling;
woodworking
turning;
milling;
format-cutting;
Holzer LLC produces and sells belts for various types of machines. Our products can be bought in cities such as Moscow, Lyubertsy, Podolsk, Novosibirsk. Russia is an industrial country. Therefore, our products are in great demand. The price is quite low, despite the fact that the quality of the products meets all modern standards and norms. If you want your machines to work stably and without failure, you should definitely buy our belts. It doesn't matter what equipment you have. We produce belts for drilling, woodworking (“Master Universal 2000”, etc.), lathe, sharpening and other types of machines.
The tapes we produce are of the highest level of quality. Therefore, with our products your machines will work like clockwork.
Main product characteristics
Our catalog contains all drive belts for machines of various types. And there are many of them. From us you can buy drive belts for almost any type of machine. Our range is huge. We produce tapes of various types.
Drive belts for machine tools are needed primarily to transmit torque from one shaft to another using pulleys. Such products are used in a huge number of different mechanisms. Their working surface is on the side. Various types of these products are produced. Drive belts for machine tools are: V-belts, flat, toothed, round, wedge-shaped, balancing.
For example, V-belts are used in agricultural machines, various industrial units, etc. They are also used in modern urban transport. V-belts for machine tools are made of cordon fabric, which is coated with layers of rubber. The main layer is located between the longitudinal parts of the fibers. The price of such products may vary depending on the model and manufacturer.
Flat belts for machine tools are used in almost every industry. They are necessary to ensure rotation of the pulleys, increase accuracy and synchronize work. Flat belts for machine tools have excellent characteristics. Their tape tolerates vibrations well and operates almost silently. Flat products have proven themselves in many industries. Moreover, their price is reasonable. Therefore, buying flat belts for machines will not be very expensive. Especially in the company Holzer LLC.
Toothed belts for machine tools combine the features of belt and chain transmission. The belt rotates very smoothly. Toothed belts for machine tools create rotation without slipping effect. Thus, their efficiency is higher than that of conventional products. Thanks to such belts, the load on the machine shaft will be significantly lower.
The round machine belt can be used for small machines with low power. Although the scope of its application is quite wide. The round belt for the machine can be used in a wide variety of gears. They are equipped with a wide variety of installations, devices and mechanisms. The round belt for the machine does not lose its performance at air temperatures from - 60 C to + 80 C. Thus, it can be used in almost any temperature regime. Round products have a low cost. Their price depends on the manufacturer of the product. You can buy various types of such products from us.
V-shaped machine belts have their own field of application - CVT systems. They work great. These products have shown their reliability and efficiency. CVT transmissions cannot function without them. They are an integral part of the entire mechanism. CVT gearboxes are among the most reliable and efficient.
In lathes, machine belts are used quite widely. Their use is determined, first of all, by their quality. A tape made from high quality materials will last a long time.
Our advantages
Sales of belts for machine tools is the main activity of Holzer LLC. The price list contains different types of products (flat, round, etc.). Our online store offers a wide variety of tapes for machine tools and other equipment. You can order and buy almost any belts from us.
We produce belts for both large industrial equipment and small lathes. The price of the products is quite low. Since we manufacture our own products, their cost is significantly lower than that of most of our competitors. Therefore, it will not be expensive to buy our products.
If you need professional advice, you can always contact our staff. They will answer all your questions. They will tell you in detail about the products we produce and help you make your choice. Thanks to this, you can buy exactly what you really need. You won’t have to overpay and buy a useless item. The quality of the equipment is high. The products comply with all international norms and standards. Its operation is reliable and durable.
In order to place an order, just contact our employees. They will issue it as soon as possible. You will be able to receive your purchase quickly and without delays. We have been working in the market for quite a long time. During our existence, we have established ourselves as a reliable and inexpensive supplier. Many of our clients have already been convinced of this and use our products, which have the highest characteristics. Therefore, working with us is profitable, convenient and comfortable!
Application of drive belts in woodworking and metalworking
Drive belts for machine tools are widely used in the metalworking and woodworking industries. The drive belt can be used both on the main movement drive and on the feed drives and to ensure the transmission of rotation from the engine to the axle. At the same time, very often belts are used not only in universal machines, but also in machines with computer numerical control (CNC).
Almost any type of belts are used in machines; to drive the main movement and the spindle, as a rule, V-belts, poly-V-belts or variator belts are used, because These units usually do not require positioning and allow slipping. For feed drives or tool change drives, toothed belts are used, very often reinforced versions; feed drives must ensure high positioning accuracy of the working head and drive rigidity.
In coordinate laser cutting and engraving machines, plasma cutting, and milling machines for feed axes, polyurethane belts with metal cord are very often used; they allow high speeds of movement of the working tool and good positioning accuracy.
Drive belts are used in many types of metalworking machines to drive the main movement, feed drives, and also to drive automatic tool changers:
- Belts for laser and plasma cutting machines;
- Belts for lathes;
- Belts for milling machines;
- Belts for machining centers.
Belts are especially used in woodworking equipment because... it does not place extremely high demands on the rigidity and accuracy of the drives. Main nodes:
- Belts for universal woodworking machines (single spindle);
- Belts for combined machines (multi-spindle) may include jointing, thickness planing, milling, circular sawing and drilling-grooving units;
- Belts for flooring production lines;
- Belts for sawmills.
Flat belts - quite commonly used as ordinary drive belts for transmissions of low, medium and high loads.
As for consumer properties, they are as follows:
- Such belts are highly durable;
- Due to its elasticity, there is no need for additional tension;
- Excellent grip and high wear resistance;
- Excellent tolerance to any chemical and climatic factors;
Now let's talk about the advantages of using flat belts:
- The belt has a quiet, vibration-resistant factor;
- Reduces the shock wave by distributing it along the entire length of the belt, which is achieved due to the elasticity of the belt;
- Flat belts do not require any maintenance at all, which is an indicator of their reliability and ease of operation;
- The belts under discussion have good durability, due to the fact that the belts are elastic, they themselves work for a long time and at the same time soften the load on the other mechanisms of the equipment, which also extends the life of the equipment in general.
Technical characteristics of driving flat belts
|
Thickness/min. Pulley diameter, mm |
Strength, N/mm width |
Modulus at 1% relative elongation, N/mm width |
Surface type |
Note |
|
Flat drive belts for light/high speed transmissions or transportTextile surfaces (impregnated or with a thin rubber coating), including spindle bands. |
|||||
|
Flat belt KHST-50 |
Fabric/fabric |
Spindle band/transport |
|||
|
Flat belt KHST-51 |
Fabric/fabric |
Spindle band/transport |
|||
|
Flat belt KHST-80/15 |
Fabric/fabric |
Transport |
|||
|
Flat belt KHST-80/25 |
Fabric/fabric |
Drive/transport |
|||
|
Flat belt KHST-90 |
Fabric/fabric |
Drive/transport |
|||
|
Flat belt KHST-90G |
Fabric/rubber |
Drive/transport |
|||
|
Flat belt FNF-3 |
Fabric/fabric |
Light drives/transport |
|||
|
Flat belt FNF-6 |
Fabric/fabric |
Light drives/transport |
|||
|
Flat belt FNF-100 |
Fabric/fabric |
Light drives/transport |
|||
Flat drive belts for most light to medium duty transmissions or transport applications(rubber/fabric or rubber/rubber) |
|||||
|
Profile KHS-F0 |
Fabric/rubber |
Light drives/transport |
|||
|
Profile KHS-F1/12 |
Fabric/rubber |
Light drives/transport |
|||
|
Profile KHS-F1/17 |
Fabric/rubber |
Light drives/transport |
|||
|
Profile KHS-1 |
Rubber/Rubber |
Light drives/transport |
|||
|
Profile KHS-1/20 |
Rubber/Rubber |
||||
|
Profile KHS-1/30 |
Rubber/Rubber |
Folder Gluers |
|||
|
Profile KHS-1/40 |
Rubber/Rubber |
Folder Gluers |
|||
|
Profile KHS-2/30 |
Rubber/Rubber |
General purpose drive |
|||
|
Profile KHS-2/60 |
Rubber/Rubber |
Folder Gluer Machine |
|||
|
Profile KHS-3/30 |
Rubber/Rubber |
General purpose drive |
|||
|
Profile KHS-3/40 |
Rubber/Rubber |
High abrasion drive |
|||
Flat drive belts for heavy, powerful machines2-way power transmission at high speeds For driving roller conveyors. |
|||||
|
Profile KHS-140T |
Rubber/Rubber |
Drive/transport |
|||
|
Profile KHS-2T |
Rubber/Rubber |
Textile machines, etc. |
|||
|
Profile KHS-A2T |
Rubber/Rubber |
Textile machines, etc. |
|||
|
Profile KHS-250T |
Rubber/Rubber |
Textile machines, etc. |
|||
|
Profile KHS-251T |
Rubber/Rubber |
Textile machines, etc. |
|||
|
Profile KHS-A3T |
Rubber/Rubber |
Textile machines, etc. |
|||
|
Profile KHS-390T |
Rubber/Rubber |
Textile machines, etc. |
|||
|
Profile KHS-391T |
Rubber/Rubber |
Textile machines, etc. |
|||
|
Profile KHS-A4T |
Rubber/Rubber |
Textile machines, etc. |
|||
|
Profile KHS-570T |
Rubber/Rubber |
Heavy/powerful drives |
|||
Flat belts with leather coveringsfor heavy starting (jerky) or for work in an oil mist environment; cable industry drawing machines, variators with cone pulleys, etc. |
|||||
|
Profile KHA-6T |
Leather/leather |
Light/Medium Drive |
|||
|
Profile KHC-2A6T |
Fabric/leather |
Mid drives |
|||
|
Profile KHC-3A10T |
Fabric/leather |
Mid drives |
|||
|
Profile KHC-A40T |
Fabric/leather |
Powerful drives |
|||
Main Applications
|
INDUSTRIES |
TYPES OF MACHINES |
|
TEXTILE |
Carding, roving, tape, spinning, etc. Pneumatic and high speed spinning Spindle braids for ring spinning machines Cable-torsion, tiered-torsion and double torsion machines Automatic winders Drum dryers and brush cleaners |
|
FLOUR GRINDING AND BAKERY |
Brush and washing machines Mill roller machines Baking powders, cleaners and blowers Dough mixers |
|
POULTRY PROCESSING |
Plucking lines |
|
CANNING MEAT |
Cutter drive, canning lines |
|
DAIRY |
Milk dryer sprayers |
|
TOBACCO |
Drives, traction and transport belts, incl. seamless |
|
FILLING AND PACKAGING |
Stretch belts with soft rubber and high friction coefficient for packaging films |
|
PRODUCTION OF CARDBOARD AND FILM PACKAGING, PRINTING |
Printing machines, die cutting presses Folder Gluers, Folding Boxes, Soft Rubber Feeders Welding machines for making bags |
|
PAPER MANUFACTURING |
Conveyors for self-tapping and slitting machines Bag making and paper bobbin winding machines |
|
WOOD PROCESSING |
Shape-milling, 4-sided, circular saw, shaving and tenoning machines Sawmills, chipboard production, etc. |
|
METALWORKING |
Automatic lathes Grinding machines Precision drilling, etc. |
|
DIFFERENT INDUSTRIES |
Car body press Extruders Generators Centrifugal and pneumatic pumps Fans |
Buy flat drive belts Moscow
We offer high-quality belts with a guarantee of long-term operation, since our products are the standard of quality. By working directly with the manufacturer, you are guaranteed to receive the best prices on all our products. You can learn more about our flat belts from our consultants by calling the numbers listed in our contacts.
The RUSIMPORT RTI company has been supplying parts and spare parts for conveyor and transport equipment for many years. We are always ready to deliver any equipment to your site, as well as help you repair your parts and mechanisms. In our product catalog you can find the following products, which are designed for various types of conveyors:
Conveyor belts;
Conveyor belts;
Drive belts;
Flat belts;
Conveyor chains;
Transport nets;
Mechanical connectors;
Gearboxes and motors;
Composite hoses for NGOs;
Vulcanizing presses;
Consumables;
Bearings;
Rubber technical plate;
Silicone products;
PVC products;
Pulleys and much more.
You can learn more about each component of the conveyor in the corresponding section or from our specialists. If you need any advice, just call our consultants at the numbers listed in our contacts, and they will be happy to tell you everything and answer all your questions. We deliver goods to any point in the Russian Federation within a strictly agreed upon time frame.
Depending on the specifics of the internal structure of various equipment and machinery (for example, milling or sharpening machines, cars, etc.), the market offers a wide variety of types of drive belts that ensure their performance. Similar rubber products include: wedge, poly-wedge, toothed, flat and other models. The latter type of belts is one of the most common in the world, as it has a number of advantages.
The main advantages of drive belts for various types of machines
Compared to timing belts, flat belts have a number of additional advantages. Among the main advantages of such rubber goods, the following should be noted:
- simple form and low cost;
- smooth and silent;
- almost complete absence of vibration and shock.
The most important advantage of flat belts is the ability to smooth out jerks at high speeds. This is possible thanks to the special shape of the product. The fact is that flat drive belts for machine tools cannot quickly catch on to the pulley (slippage occurs at the moment of starting), so this process occurs gradually.
The Holzer Flexo company sells a variety of rubber products. The cost of products sold is on average lower than that of competitors, and the geography of the main production forces is located evenly across Russia, which saves time on order transportation.
The production of flat belts for machines and equipment meets the highest requirements. High-quality belts increase the reliability and productivity of equipment and do not require special maintenance.
Application: textile industry, industrial machines, sawmills and chipboard machines, centrifugal and pneumatic pumps, roller mills, stone processing lines, generators and fans, milk drum dryers, baking powder and dough mixers
Flat endless cord cord belts (type I, II, III):
Flat drive belts make it possible to smooth out jerks (torque surges) during heavy starting at high speeds, due to initial slipping and gradual engagement with the drive pulley.
Flat drive belts largely absorb machine oils and greases, thereby ensuring power transmission without loss of friction coefficient for a long time.
Flat drive belts are easy to use and have a long service life.
Flat endless cord belt with double-sided fabric covering (type II)
Flat endless cord belt with one-sided fabric covering (type I)
Flat endless cord belt without fabric covering (type III)
Flat belt parameters, mm
Length (L) 1000 ÷ 5600
Width (W) 25 ÷ 200
Thickness (t) 2.2 ÷ 6.0
Flat belts based on polyamide fabrics
Flat belts with a polyamide core replaced the classic flat rubber-fabric belts.
The tension layer of flat belts is polyamide with its high tensile strength and withstand heavy loads, with virtually no permanent elongation.
Various elastomers and leathers are used for the working sides of flat belts. Flat drive transmissions using flat belts with a polyamide core are characterized by quiet operation, precision synchronous rotation and high efficiency.
Flat belts with a polya core are resistant to oils, fats and other solvents, have high wear resistance and significant tensile strength. fabrics
Application of flat belts with a polya core:
transmission of high power in classic and multi-pulley transmissions;
in packaging machines; in the paper and textile industry as tangential belts; for cutting tools and machine tools; for loading devices.
Flat drive belts (based on polyamide traction core) for power transmission from the world's leading manufacturers, offered to your attention, can be purchased both in cash and by bank transfer. These belts are designed to operate in power drives of industrial equipment.
Flat drive belts can be used for heavy-duty applications with high tensile forces, such as the main drives of roller mills, paper machines, stone cutting and crushing machines, sawmills, stamping presses in metalworking, etc.
Main differences and advantages:
Flat drive belts make it possible to smooth out jerks (torque surges) during heavy starting at high speeds, due to initial slipping and gradual engagement with the drive pulley.
. Flat drive belts largely absorb machine oils and greases, thereby ensuring power transmission without loss of friction coefficient for a long time.
. Flat drive belts are easy to use and have a long service life.
|
BELT TYPE |
Manufacturer |
General |
Thickness |
Upper |
bottom layer |
Min. Ø |
Limit |
An effort |
Color |
|---|---|---|---|---|---|---|---|---|---|
| KHST-51 | India | 0.6 | 0 | textile | textile | 10 | 90 | 1.5 | -- |
| TP-5 | Türkiye | 0.7 | 0 | PA fabric | PA fabric | 15 | 90 | 4 | Yellow - Green |
| KHS-20FBG | India | 2 | 0 | rubber | textile | 40 | 120 | 3 | -- |
| KHST-80 | India | 0.9 | 0.25 | textile | textile | 20 | 100 | 2.3 | -- |
| PS-55 | India | 0.9 | 0.25 | cotton fabric | rubber | 20 | 100 | 2.3 | -- |
| KHST-90 | India | 1.2 | 0.25 | textile | textile | 20 | 100 | 2.3 | -- |
| KHST-90G | India | 1.2 | 0.25 | textile | rubber | 20 | 100 | 2.3 | t.Green-Black |
| FNF-3 | India | 0.9 | 0.25 | textile | textile | 20 | 100 | 2.3 | t.Zel. |
| TT4 | Türkiye | 1.2 | 0.25 | textile | textile | 15 | 90 | 4 | Green-Green |
| FNF-30 | India | 0.9 | 0.25 | textile | textile | 15 | 90 | 4 | t.Zel. |
| KHS-F0 | India | 1 | 0.25 | textile | rubber | 20 | 80 | 2.3 | Green-Green |
| TG4FSTR | Türkiye | 1.1 | 0.2 | rubber | rubber | 20 | 90 | 4 | Green-Black |
| PF-0 | India | 0.9 | 0.2 | textile | rubber | 20 | 80 | 3.0 | Green-Green |
| FNF-6 | India | 1.1 | 0.4 | textile | textile | 30 | 150 | 3.5 | -- |
| TT6 | Türkiye | 1 | 0.4 | textile | textile | 20 | 135 | 6 | Green-Green |
| FNF-60 | India | 1 | 0.4 | textile | textile | 20 | 190 | 3.8 | Green-Green |
| KHS-F1/1.2 | India | 1.2 | 0.4 | textile | rubber | 30 | 150 | 3.5 | Green-Green |
| TG4 | Türkiye | 1.2 | 0.4 | rubber | textile | 20 | 90 | 4 | Green-Black |
| PF-1 | Japan | 1.3 | 0.4 | textile | rubber | 30 | 150 | 5 | Green-Green |
| KHS-A1 | India | 1.4 | 0.4 | textile | rubber | 30 | 150 | 3.5 | Green-Green |
| TG6 | Türkiye | 1.2 | 0.4 | rubber | textile | 20 | 135 | 6 | Green-Black |
| KHS-F1/1.7 | India | 1.7 | 0.4 | textile | rubber | 30 | 150 | 3.5 | Green-Green |
| RNF-60/1.7 | Japan | 1.7 | 0.4 | textile | rubber | 30 | 150 | 5 | t.Green-Green |
| KHS-F1/20 | India | 1.2 | 0.4 | textile | rubber | 30 | 150 | 3.5 | -- |
| KHS-1 | India | 1.5 | 0.4 | rubber | rubber | 30 | 150 | 3.5 | Yellow - Green |
| GG6 | Türkiye | 1.5 | 0.4 | rubber | rubber | 25 | 135 | 6 | Green-Green |
| P-1 | Japan | 1.5 | 0.4 | rubber | rubber | 30 | 150 | 5 | Salad.-Yellow. |
| PS-140 | India | 1.7 | 0.4 | rubber | rubber | 25 | 190 | 3.8 | t.Green-Yellow |
| PS-140T | India | 1.7 | 0.5 | rubber | rubber | 30 | 225 | 5 | t.Green-Yellow |
| KHS-140T | India | 1.7 | 0.4 | rubber | rubber | 30 | 200 | 6 | Sin.-Ser. |
| GT14 | Türkiye | 1.7 | 0.4 | rubber | textile | 50 | 315 | 14 | Green-Black |
| KHS-140 | India | 1.7 | 0.4 | rubber | rubber | 40 | 150 | 3.5 | t.Green-Yellow |
| KHS-1/30 | India | 3 | 0.4 | rubber | rubber | 40 | 150 | 3.5 | Salad.-Yellow. |
| KHS-1/30T | India | 3 | 0.4 | rubber | rubber | 50 | 180 | 4 | Syn.-Syn. |
| GG10/3 | Türkiye | 3 | 0.4 | rubber | rubber | 30 | 225 | 10 | Green-Green |
| PT-30 | India | 3 | 0.4 | rubber | rubber | 30 | 190 | 3.8 | Salad.-Yellow. |
| KHS-1/40 | India | 4 | 0.4 | rubber | rubber | 50 | 150 | 3.5 | Salad.-Yellow. |
| KHS-1/40 T | -- | 4 | 0.4 | rubber | rubber | 60 | 180 | 5 | Syn.-Syn. |
| GG10/4 | Türkiye | 4 | 0.4 | rubber | rubber | 30 | 225 | 10 | Green-Green |
| PT-40 | India | 4 | 0.4 | rubber | rubber | 50 | 180 | 5 | Salad.-Yellow. |
| KHS-1/60 T | India | 6 | 0.4 | rubber | rubber | 80 | 180 | 4 | Syn.-Syn. |
| F35/28 | Italy | 2.8 | 0.4 | textile | leather | 35 | 200 | 3.5 | Green-Grey |
| KHC-A6 (LT6) | India | 2.5 | 0.4 | textile | leather | 35 | 190 | 3.8 | Red-Grey |
| KHC-A6T | India | 2.5 | 0.5 | textile | leather | 35 | 225 | 5 | Red-Grey |
| KH-A6T | India | 3.5 | 0.5 | leather | leather | 40 | 225 | 5 | Ser.-Ser. |
| KHS-140 | India | 2 | 0.5 | rubber | rubber | 30 | 150 | 3.8 | Green-Yellow |
| KHS-1/20 | India | 2 | 0.6 | rubber | rubber | 40 | 160 | 4 | Salad.-Yellow. |
| P-2 | India | 2 | 0.6 | rubber | rubber | 40 | 160 | 4 | Salad.-Yellow. |
| P-3 | India | 3 | 0.6 | rubber | rubber | 60 | 150 | 4 | Salad.-Yellow. |
| PT-40IG | India | 4 | 0.6 | rubber | rubber | 60 | 150 | 4 | Green-Yellow |
| KHS-2 | India | 2.2 | 0.8 | rubber | rubber | 60 | 300 | 7 | Salad.-Yellow. |
| KHS-2T | India | 2.3 | 0.8 | rubber | rubber | 60 | 320 | 7.5 | Sin.-Ser. |
| GG14 | Türkiye | 2 | 0.8 | rubber | rubber | 60 | 320 | 7.5 | Green-Green |
| KHS-2ХT | Japan | 2.3 | 0.8 | rubber | rubber | 60 | 320 | 7.5 | Black-Black |
| RNR-100/23T | India | 2.3 | 0.8 | rubber | rubber | 60 | 315 | 7.5 | Black-Black |
| PS-2 | India | 2.3 | 0.8 | rubber | rubber | 60 | 300 | 7 | t.Green-Yellow |
| KHS-2/30 | India | 3 | 0.8 | rubber | rubber | 60 | 300 | 7 | Salad.-Yellow. |
| PS-3 | Japan | 3 | 0.8 | rubber | rubber | 60 | 300 | 7 | t.Green-Yellow |
| KHS-2/40 | India | 4 | 0.8 | rubber | rubber | 60 | 300 | 7 | Salad.-Yellow. |
| PS-4 | Japan | 4 | 0.8 | rubber | rubber | 60 | 300 | 7 | Green-Yellow |
| KHS-2/60 | India | 6 | 0.8 | rubber | rubber | 60 | 300 | 7 | Salad.-Yellow. |
| PS-6 | Japan | 6 | 0.8 | rubber | rubber | 60 | 300 | 7 | -- |
| KHC-2A6 (LT14) | India | 3.1 | 0.8 | textile | leather | -- | -- | -- | -- |
| KHC-A10 | India | 3.2 | 0.8 | textile | leather | -- | -- | -- | -- |
| KH-A10 | India | 4.6 | 0.8 | leather | leather | -- | -- | -- | Ser.-Ser. |
| LNL-100 (LL14) | Japan | 4.8 | 0.8 | leather | leather | -- | -- | -- | Ser.-Ser. |
| KHS-3 | India | 3 | 1 | rubber | rubber | 100 | 400 | 10 | Salad.-Yellow. |
| POE-250T | Japan | 2.6 | 1 | rubber | rubber | 100 | 430 | 11 | t.Green-Yellow |
| KHS-250T | India | 2.6 | 1 | rubber | rubber | 90 | 430 | 11 | Sin.-Ser. |
| PS-250T | Japan | 2.6 | 1 | rubber | rubber | -- | -- | -- | t.Green-Yellow |
| PS-251 | -- | -- | 1 | rubber | rubber | 100 | 400 | 10 | -- |
| PS-251T | Japan | -- | 1 | rubber | rubber | 100 | 430 | 11 | -- |
| KHS-251T | Japan | 3 | 1 | rubber | rubber | 100 | 430 | 11 | -- |
| KHS-3/40 | India | 4 | 1 | rubber | rubber | 100 | 400 | 10 | -- |
| KH-2A6 (LL14) | India | 5 | 1 | leather | leather | -- | -- | -- | Sin.-Ser. |
| KH-A10T | India | 5.2 | 1 | leather | leather | -- | -- | -- | Sin.-Ser. |
| LT20 | -- | 3 | 1 | leather | textile | -- | -- | -- | -- |
| LL20 | Slovenia | 4.8 | 1 | leather | leather | -- | -- | -- | Sin.-Ser. |
| P-5 | Japan | 5 | 1.2 | rubber | rubber | 120 | 400 | 10 | Salad.-Yellow. |
| KHS-3/50 | India | 5 | 1.2 | rubber | rubber | 120 | 400 | 10 | Salad.-Yellow. |
| KHS-391 | India | 4 | 1.5 | rubber | rubber | 150 | 600 | 15 | Salad.-Yellow. |
| KHS-390T | Japan | 3.3 | 1.5 | rubber | rubber | 150 | 650 | 17 | Sin.-Ser. |
| GG33 | -- | -- | 1.5 | rubber | rubber | 150 | 650 | 17 | -- |
| PS-391 | Japan | 4 | 1.5 | rubber | rubber | 150 | 650 | 17 | t.Green-Yellow |
| PS-391T | Japan | 4 | 1.5 | rubber | rubber | -- | -- | -- | -- |
| KHC 2A10 | -- | -- | 1.5 | -- | -- | -- | -- | -- | -- |
| KH-2A10 (LL20) | India | 4.8 | 1.5 | leather | leather | -- | -- | -- | Sin.-Ser. |
| KHC-3A10 | -- | 5.2 | 2.4 | textile | leather | -- | -- | -- | -- |
| KH-3A10 | -- | 7.5 | 2.4 | leather | leather | -- | -- | -- | Sin.-Ser. |
| KHC-4A10T | India | 6.2 | 3 | textile | leather | -- | -- | -- | -- |
| KHS-A2T | India | 3 | 0.5 | rubber | rubber (pr/k) |
70 | 320 | 8 | Green-Black |
| KHS-A3T | India | 3.5 | 1 | rubber | rubber (pr/k) |
120 | 430 | 11 | Green-Black |
| KHS-A4T | India | 5 | 1.5 | -- | rubber (pr/k) |
250 | 750 | 21 | Green-Black |
| KHS-A5T | India | 5.2 | 3 | -- | rubber (pr/k) |
-- | -- | -- | Green-Black |
|
BELT TYPE |
Manufacturer |
General |
Thickness |
Upper |
bottom layer |
Min. Ø |
Limit |
An effort |
Color |
Esband seamless flat drive belts
Seamless belts Esband seriesNE: working cover made of neoprene (high quality chloroprene rubber) have proven themselves in drives for woodworking equipment. In particular, they have become widely known NE series seamless belts on spindle drives of 4-sided molding planing machines of the company Weinig, like the original ones (“ native") components from model series series Unimat - Powermat - Hydromat, both old releases (sometimes 20-30 years ago) and new ones, regardless of the number of spindles (this includes all modifications of WACO).
It is also very useful for end users to know that the types of belts NE22, NE26 suitable for the vast majority of 4-sided planing machines on the Russian market, regardless of the brand, country of origin, number of spindles, and other possible modifications (both Western and Asian TMs Winner, Beaver, Nortec, and many others).
The basic range of warehouse types is given in the table below, and, starting from a spindle power of 17-22 kW, we recommend using only the NE18 type, as it is the most reliable and has minimal elongation in operation:
All seamless belts Esband antistatic, resistant to industrial oils, lubricants, gasoline, have a constant coefficient of friction, high wear resistance, and low noise in operation. Our extensive stock of this series includes over 100 lengths, in 10mm increments and taking into account a nominal length tolerance of +/- 0.5%.
The belt types in this series NE21 and NE22 are ideal for drive scoring saws of machines of different functionality, sharpening machines, grinding machines for various purposes in metalworking. As a rule, in such transmissions the belt width does not exceed 30 mm (often less), with an unfolded length of no more than 1000 mm. (usually from 400 to 700 mm).
Since the belts of this series have lateral flexibility, for self-centering of the belt when operating at high speeds, it is optimal to bomb at least one drive pulley in the transmission (if the pulleys are not equipped with limiting flanges). For some types of transmissions (including transportation), grinding one or both sides of the belt as an additional option is important.
To optimally select flat seamless belts for a specific power transmission, the following parameters must be provided:
Engine power, (kW)
. diameters of driving and driven pulleys (mm)
. center distance of pulleys (mm) - when the number of pulleys is more than 2.
. peripheral speed of drive pulley (rpm)
. operating conditions (temperature, dust, oil, etc.)
. the presence of frequent drive starts (including a sharp jump in torque to maximum) and/or sudden braking.
. to calculate complex gears, especially in cases where belts operate on both sides, a kinematic diagram with reliable center distances and pulley angles is required.