Lada 

Air conditioner remote control code wsa 090 120. Operating instructions for air conditioner EWT G090GDI, G120GDI, G180GDI, G240GDI. Rules for replacing batteries

The instructions for the air conditioner control panel are divided into chapters that describe in detail the functions and rules of use.

All air conditioner control panels are divided into infrared and wired. The latter type is used for industrial and semi-industrial installations. They transmit signals through thin special wires. One wired remote control controls 3 to 8 air conditioners. How to set up the air conditioner remote control is described in detail in the instructions.

Infrared remote controls work optimally at a distance of up to 4 meters.

At a distance of 4 to 8 meters, bright lighting may disrupt the infrared beam.

The instructions for the air conditioner control panel begin with a schematic representation of the device indicating its parts and buttons.

Main functions

The description of the air conditioner remote control says: to exit to the main functions menu, you need to press the MODE button. The display shows the following modes:

  • HEAT– the air heats up to 30 degrees;
  • COOL– the air is cooled to +15 – 18 degrees. To change the temperature, you need to press the down or up arrows;
  • DRY– air dehumidification. With a stable temperature, humidity decreases;
  • FAN– regulates the fan rotation speed. Typically 3 speeds are set;
  • AUTO– all parameters are set automatically. Sometimes this mode is activated with a separate button. It can also be started from the air conditioner body, without a remote control;
  • SLEEP– quiet operation at night;
  • SWING– a special mode of intensive ventilation of the room.

Rules for replacing batteries

In the description of the air conditioner remote control, a separate section is devoted to the correct use of the device:

  • You need to change both batteries at once and install the same ones. To ensure that the remote control settings are not lost, replacement should be carried out as quickly as possible;
  • During a long period of inactivity, it is advisable to remove the batteries from the remote control;
  • With standard use, batteries last about 12 months. Some models indicate that the batteries need to be replaced. The fact that the batteries are weak is noticeable by the dimming of the display brightness and slow response to commands;
  • Do not attempt to recharge disposable batteries.

Remote control

  • In order for the signal from the remote control to reach the receiving device, it is necessary to point the LED at the air conditioner. Any physical obstacles interfere with the passage of the signal. Setting up the air conditioner remote control, as the instructions indicate, is not at all difficult;
  • The remote control should be protected from falls and getting wet;
  • The remote control operates at a distance of no more than 8 meters;
  • If dust accumulates on the LED, it also interferes with the passage of the infrared beam. Therefore, the remote control must be wiped periodically with a dry cloth.

The HYUNDAI WSA-090/120 remote control is suitable for air conditioner models:

  • air conditioner HYUNDAI WSA-090BE
  • air conditioner HYUNDAI WSA-120BE
  • air conditioner HYUNDAI HMH-181BE

CHARACTERISTICS:

BATTERY TYPE: AAA (LR03) - 2 PCS.

REMOTE TYPE: ORIGINAL

MANUFACTURER: HYUNDAI

TYPE OF EQUIPMENT: FOR AIR CONDITIONER

Express delivery :

within the Moscow Ring Road:

1) FREE- when ordering from 1500 rub.

2) 200 rub.(within the Moscow Ring Road) - when ordering less than 1500 rub.

up to 5 km. from MKAD- 400 rub.

from 5 km to 10 km. from MKAD- 600 rub.

from 10 km. up to 15 km. from MKAD- 800 rub.

from 15 km. Up to 20 km. from MKAD- 1000 rub.

Over 20 km. By agreement.

Delivery within Russia (by Russian Post and transport companies): only with 100% prepayment.

  • The cost of shipping will be from 300 rubles.

Returns or exchanges are made within 14 days from receipt of the order.

We accept payment in cash and by bank transfer.

Cash payment is valid if you:

  • buy the remote control at the point of issue
  • upon delivery by courier

Payment by card (non-cash payment) is valid:

  • when purchasing a product from the site
  • when purchasing goods at the point of delivery

Returning remote controls

All remote controls (control devices for home appliances) are consumable parts, so there are no warranty centers for these devices. (This rule applies to both original and non-original remote controls)

That is why in our store there is a guarantee rule according to the rules of consumer rights on the return of goods within 14 days.

Therefore, we ask you to carefully select the remote control for your device on our website; generally, original remote controls last from 4 to 8 years, and accordingly, their price is higher than that of non-original ones. Non-original remote controls cost from 290 rubles, but you must understand that this device can last much less than the original remote control. To avoid the problem of returning the remote control, contact our managers and we will help you with choosing a remote control.

If the remote control is sent to another city, the warranty begins to apply from the moment you receive the parcel.

To return the remote control under warranty you need:

  • know your order number (it is indicated in the warranty card)
  • you must have a receipt

Return and exchange conditions:

1.The device must be returned:

  • in case of inoperability of the device, in the absence of signs of opening the device case and mechanical damage;
  • in case of incomplete operation of the device, in the absence of signs of opening the device case and mechanical damage;

2. The device cannot be returned:

  • if there is mechanical damage on the device (its parts);
  • if there are signs of the device case being opened;
  • if signs of improper operation of the device are detected (the rules for operating the remote control are given in the operating instructions supplied with the equipment for which this remote control is intended)

3. Exchange and return:

  • carried out within two weeks from the date of purchase of the remote control;
  • For Russia, returns are made by cash on delivery after agreeing on this issue with us!!! Parcels sent without prior approval will not be received by us at the post office;
  • return of goods of proper quality is possible if its presentation, integrity of packaging and consumer properties are preserved;
  • Payment for the initial delivery by courier is not refundable, since the courier provides the opportunity to check the functionality of the remote control immediately on site on the equipment, that is, only the amount for the purchased product or part of the goods is returned. Also, postage costs are not refunded, only the price of the item.
  • for buyers from Moscow, exchanges and returns are carried out in person at the address Moscow, Bagrationovskaya metro station, Gorbushkin Dvor shopping center, 1st floor, pavilion C1-044

Our operators will always try to help you choose the required remote control, give detailed advice and will not leave your problem unattended!

Office address: Moscow, metro station "Bagrationovskaya", shopping center "Gorbushkin Dvor", 1st floor, pavilion C1-044

Working hours: from 10.00 to 20.00 without a break for lunch and weekends.

Instructions for the air conditioner EWT G090GDI, G120GDI, G180GDI, G240GDI

ON/OFF button

Press this button - the device turns on, press again - the device turns off. When you turn the device on or off, the timer and standby functions are canceled, but the set time is retained.

MODE button

By pressing this button, the AUTO (automatic), COOL (cooling), DRY (dry), FAN (fan), HEAT (heat) modes are selected in turn. Automatic mode does not work when the power is on. In automatic mode, the temperature is not displayed; in heat mode the initial value is 28Co; in other modes the initial value is 25Co.

SLEEP button

Pressing this button selects whether to turn the standby mode on or off. After turning on the power, disabling the standby mode does not work. Once the appliance is turned off, the standby function is cancelled. Once the standby function has been set, a signal appears on the display. In this mode you can set the time on the timer. This function is not used in automatic and fan modes.

FAN button
Pressing this button alternates between AUTO, LOW, MIDDLE and HIGH speeds.

CLOCK button

When you press this button, you can set the clock and a flashing clock face appears on the display. Within 5 seconds the values ​​are set by pressing the + or – button; When you continuously press this button for 2 seconds, every 0.5 second the tenth of a minute indicator increases by 1. While flashing, release the button, the dial signal becomes constant, indicating successful completion. Once the current is turned on, the 12:00 indication is canceled and a clock face appears on the display. If the dial appears, it means the time is shown for the clock, otherwise it is the timer time.

LIGHT button

This button turns on the light on the display. When the light is turned on, an image of a burning light bulb and a light indicator appear on the display. When the light is turned off, the light bulb image remains and the indicator goes off.

The question is the most frequently asked on the Internet, the answer to it is here. By choosing the 23C store, you will solve the problem of which air conditioner is better to buy. On our website you can easily select climate control equipment according to your tastes and capabilities and will please yourself at an affordable price.