Lada 

Motoblock favorite robin subaru ex21. Motoblocks Favorit. Overview, characteristics, attachments, operating instructions. Favorite MB with Robin-Subaru EX21D engine

Our Russian gardener has long been familiar with the “Favorite” walk-behind tractors produced by the V.A. Plant. Degtyareva - "ZiD". Today we will consider a model with a Subaru EX 17 6.0 engine made in Japan.
Motoblock "Favorite" with Subaru EX 17 6.0 engine(Japan) is able to cope with the cultivation of a large area of ​​land. Suitable for helping farmers and capable of performing many tasks not only for domestic use. It has a good weight (73 kilograms), which allows it to cope with heavy soil.

The Russian walk-behind tractor "Favorit" has characteristics and equipment that simplify human work:

  • high engine power (6.0 hp);
  • four-stroke Japanese engine (lifetime up to 5000 hours) with a cast iron cylinder liner;
  • top valve arrangement;
  • gearbox (2 forward/1 reverse) and gear reducer;
  • pneumatic wheels, “plus” axle extensions;
  • 6 rotary cutters;
  • large adjustable processing width (35/62/89);
  • power take-off shaft (for using attachments);
  • adjustable steering wheel;
  • possibility of using a trolley;
  • load capacity (up to 400 kg);
  • compact size (very convenient for transportation);
  • a wide range of different attachments with which the Favorite can be used: for cleaning the territory thanks to a brush-cleaner, a shovel-mouldboard and a rotary snow blower; also for cutting grass, transporting goods, crushing feed, pumping water, and, of course, for cultivating the soil, sowing, and subsequently harvesting.

The reliable walk-behind tractor "Favorit" is equipped with an equally reliable and trouble-free four-stroke gasoline engine Robin-Subaru EX-series - these are professional general purpose gasoline engines Robin-Subaru, designed specifically for use in construction equipment.

Robin-Subaru EX series are 4-stroke single-cylinder engines with an inclined cylinder arrangement and an overhead valve drive. They are famous for their high operational reliability and extended service life. This model is equipped with an EX 17 engine with 6 horsepower and a cylinder capacity of 169 cubic centimeters, characterized by low noise and vibration levels, economical fuel consumption and wear resistance.

Robin-Subaru EX Series Engines
engine's type air-cooled gasoline engine with an inclined cylinder arrangement and overhead valve drive
Diameter x Stroke, mm 67 x 48
Volume, cm 3 169,0
Power kW (hp)/rpm/min 4,2 (5,7) / 4000
Max. torque 11.3 Nm / 1.15 kgm / 2500 rpm
Rotation of the selection shaft is powerful. Counterclock-wise
Fuel Automotive unleaded gasoline
Tank capacity, l 3,2
Engine crankcase capacity, l 0.6
Ignition Transistor
Starting system Reverse starter
Dimensions, mm 312 x 359 x 335
Dry weight, kg 15,0

Specifications in comparison:

EX13D

MODEL EX13D
126
Constant, kW/rpm 2,2/3600
3,0/3600
Maximum, kW/rev. min 3,2/4000
4,3/4000
Direction of rotation
Oil capacity, liter 0,6
Fuel Auto
2,7
Spark plug NGK BR-6HS (CHAMPION RL86C)
Starter spring starter
Net weight, kg 14
Dimensions (L x W x H), mm 297x341 x 318

EX17D

MODEL EX17D
Cylinder displacement, cubic meters cm. 169
Constant, kW/rpm 2,9/3600
performance hp/rpm 4,0/3600
Maximum, kW/rev. min 4,2/4000
productivity, hp/rpm 5,7/4000
Direction of rotation Counterclockwise when viewed from the power take-off shaft
Oil capacity, liter 0,6
Fuel
Fuel tank capacity, liter 3,6
Spark plug NGK BR-6HS (CHAMPION RL86C)
Starter
Net weight, kg 15
Dimensions (L x W x H), mm 304 x 354 x 335

EX21D

MODEL EX21D
Cylinder displacement, cubic meters cm. 211
Constant, kW/rpm 3,7/3600
performance hp/rpm 5,0/3600
Maximum, kW/rev. min 5,1/4000
productivity, hp/rpm 7,0/4000
Direction of rotation Counterclockwise when viewed from the power take-off shaft
Oil capacity, liter 0,6
Fuel mobile gasoline (unleaded)
Fuel tank capacity, liter 3,6
Spark plug NGK BR-6HS (CHAMPION RL86C)
Starter spring starter / electric starter
Net weight, kg 16
Dimensions (L x W x H), mm 311 x 366 x 335

EX27D

MODEL EX27D
Cylinder displacement, cubic meters cm. 265
Constant, kW/rpm 5,1/3600
performance hp/rpm 7,0/3600
Maximum, kW/rev. min 6,6/4000
productivity, hp/rpm 9,0/4000
Direction of rotation Counterclockwise when viewed from the power take-off shaft
Oil capacity, liter 1,0
Fuel mobile gasoline (unleaded)
Fuel tank capacity, liter 6,1
Spark plug NGK BR-6HS (CHAMPION RL86C)
Starter spring starter / electric starter
Net weight, kg 21
Dimensions (L x W x H), mm 355x420x410

The Russian walk-behind tractor "Favorite" has a gear reducer, which is much more reliable than using chains to drive the gearbox sprockets. The belt clutch ensures smooth operation and ease of maintenance, and the manual transmission allows you to select the speed mode depending on the load. Rearranging the pulleys makes it possible to speed up gardening work. As a result, the walk-behind tractor MB Favorite will be able to operate at a speed of 11 kilometers per hour instead of 3 km/h, but this may be more useful for transporting goods rather than for working on the ground. Reverse gear is very helpful when maneuvering in tight areas, because the weight of 73 kilograms still makes itself felt, but the Favorit walk-behind tractor is highly stable. The processing width is adjusted by removing the outer cutters and allows you to set the width from 35 to 89 centimeters.

Image from the “Operation Manual for the Favorit walk-behind tractor, models MB-3, MB-4, MB-5 and their modifications”:

1 - steering wheel; 2 - rod; 3 - steering support; 4 – pulley casing; 5 - motor with gearbox; 6 - wheel; 7 - shield; 8 - attachment support; 9 - walk-behind tractor gearbox; 10 - oil filler plug; 11 - clutch lever.

ZiD "Favorit" has convenient controls that make it possible to adjust the height and angle of rotation. In addition, adjustment can be performed both in the horizontal and vertical planes. Special steering wheel handles are anti-vibration and allow you to work for a long time. On walk-behind tractors "Favorit" pneumatic wheels are installed, when installed the ground clearance is 150 millimeters. This is very good for transporting goods.

"Favorit" is a multifunctional agricultural machinery that allows you to perform various gardening work. The cost of walk-behind tractors is in the middle price range, so the Favorit with the Subaru EX 17 6.0 engine (Japan) is an excellent assistant with a good price. Foreign competitors are much more expensive with the same technical characteristics. And given the installed Japanese engine (which is the main component of the walk-behind tractor), equipment produced in Russia is in no way inferior to imported ones. "Favorit" is distinguished by its excellent adaptability to Russian weather and other conditions. High-quality assembly and reliable components ensure many years of trouble-free operation of the unit. Considering that “Favorit” walk-behind tractors are assembled at a plant that has a history of quality weapons, military technologies and developments are used in the production of walk-behind tractors, which have an impact on the manufactured products.

List of agricultural and other mounted implements that are recommended for use with the Favorit walk-behind tractor:

  1. P1-20/2 plow or "Mole" plow.
  2. Hiller OH-2/2.
  3. Hitch SV 1/1 "Favorite".
  4. Lugs 460x160
  5. Trailed trolley TPM-350-2
  6. Shovel (snow blade) motoblock MB "Favorite".
  7. Motoblock sweeping brush ShchM-0.9 "Favorite".
  8. Walk-behind mower KM-0.5 "Favorit".
  9. Motoblock snow blower SM-0.6 "Favorit".
  10. Harrow.
  11. Potato digger KV-2.
  12. SU-4 frame.

Video: Motoblock "Favorite" - demonstration

1. Poor connection on the spark plug 2. Old gasoline. Water and dirt in the fuel system. 3. The fuel tank cap vent is clogged. 4. Dirty air filter. 5. Carburetor clogged. 1. Broken V-belt 2. V-belt slippage Increased vibration 1. Loosening of the cutter blades or their damage 2. Loosening bolts or mounting screws.

Remedy

Malfunction Remedy
Engine won't start 1. Fill the fuel tank with clean, fresh, unleaded gasoline.
2. Drain the old gasoline from the fuel tank and fill it with clean, fresh, unleaded gasoline.
3. Set the throttle control lever to the "MAX" position
4. Remove the spark plug. Inspect, clean and replace if necessary. Check the gap between the electrodes.
5. Check the oil level and bring it to normal according to the engine operating manual
The engine runs unevenly 1. Securely fasten the high voltage wire
2. Drain the old gasoline from the fuel tank and fill it with clean, fresh, unleaded gasoline.
3. Clean the vent hole in the fuel tank cap
4. Clean or replace the air filter.
5. Clean the fuel channels and adjust the carburetor.
When the engine is running and the clutch is engaged, the cutters do not rotate 1.Replace the V-belt
2. Adjust the belt tension using the clutch cable or moving the engine along the frame
Increased vibration 1. Immediately stop the engine and remove the high voltage wire from the spark plug. Replace faulty parts.
2. Immediately stop the engine and remove the high voltage wire from the spark plug. Tighten the screws or replace the bolts.

Productive walk-behind tractor ZiD "FAVORITE" Well suited for intensive use on large to medium sized areas. Using this model, you can quickly cultivate, plow a large vegetable garden, harvest root crops, remove snow, transport cargo, and perform many other jobs on a personal plot or farm.

Wide range of speeds (the box provides switching in the range of 2 forward speeds and 1 reverse, and by rearranging the belt on the pulley you can change the gear ratio, thereby changing the speed of movement. Total possible speed options: up to 4 forward and 2 reverse: from the most powerful first gear - for heavy agricultural work, up to the highest speed - 12 km/h, used when transporting goods;

The gear reducer is very durable, and the large-diameter wheels can easily overcome potholes and bumps. The ZiD “FAVORIT” walk-behind tractor has a mass of 73 kilograms, thanks to which it “bites” into the hardest soil without any problems. A working width of 35 centimeters allows you to easily maneuver between rows, and if you install all the cutters, the width increases to 89 centimeters, which makes it possible to easily cope with large areas.
The ZiD "FAVORIT" walk-behind tractor allows the use of various mounted and trailed equipment, thanks to which the unit will not be idle either in winter or in summer. And simple controls will allow you to easily operate the model even for a person far from technology. The use of special anti-vibration steering wheel handles has made it possible to minimize the negative impact of vibration on the hands and increase operator comfort.

Attachments for working with soil (plow, hiller, digger) are installed via a hitch. For better cross-country ability and grip on the surface when working with a hitch, instead of pneumatic wheels, metal ones are used: lugs or KUMs. Narrow wheels with a large diameter (over 500 mm) are usually used when working with a 2-row hiller. When choosing attachments, you should take into account its manufacturer: wheels + extensions or hitch + rear equipment (plow, hiller, digger) must come from the same factory (VRMZ or Mobile-K, Gagarin).

Advantages of the "Favorit" walk-behind tractor with the Subaru EX 21 engine
  • Professional gasoline engine (made in Japan) Subaru EX 21 7.0 hp. 210 cc -cast iron cylinder liner(increased wear resistance and resistance to operating conditions along with reduced oil consumption).

    • The walk-behind tractor is equipped with 6 cutters- cultivators that allow soil cultivation, depending on the installation of two, four or six cutters with optimal performance.

    Expanding the speed range- by rearranging the pulleys, you can expand the speed range of the walk-behind tractor from 3 to 11 km/h.

    Multifunctionality b - using a set of attachments, it can perform the following operations: plowing, cultivating, hilling, harrowing, grass cutting, sweeping, water supply, snow removal and transportation work.

Three times awarded Open Joint Stock Company “Plant named after V.A. Degtyarev" is a modern diversified enterprise, the largest in the Vladimir region and one of the leading machine-building enterprises in the country.

Its history began during the First World War, when the Russian army experienced an acute shortage of automatic small arms. In 1916, the First Russian Joint Stock Company of rifle and machine gun factories was created in Petrograd to implement the proposal of the Danish syndicate “Dansk Rekilriffel Syndikat” to build a new machine gun factory in the center of Russia.

On August 27, 1916, the construction of the first buildings of the Kovrov Machine Gun Plant began. This date is considered to be the plant’s birthday (the company has been named after V.A. Degtyarev since 1949). On August 12, 1917, the first submachine guns of the Danish designer Madsen’s system were handed over to the artillery inspector.

However, the real development of the plant is associated with the activities of the outstanding Russian scientist and designer, inventor of the world's first automatic machine, V.G. Fedorov (1874-1966, worked in Kovrov in 1918-1931) and his closest student and assistant, the outstanding designer V.A. Degtyarev (1880-1949, in Kovrov in 1918-1949). They were sent to Kovrov by the Main Artillery Directorate at the beginning of 1918, at the most critical moment, when the previous owners - Petrograd and Danish entrepreneurs decided to stop production and close the plant. V.G. Fedorov and V.A. Degtyarev were able to save the enterprise and establish the production of domestic weapons here. In 1919 the plant was nationalized. In 1921 V.G. Fedorov created the country's first design bureau for the development of automatic small arms at the plant.

In 1927, the Degtyarev DP light machine gun, designed at the factory, was adopted by the Red Army, in subsequent years - the aviation DA, tank DT, large-caliber Degtyarev and Shpagin DShK, Degtyarev PPD and PPSh submachine guns, Vladimirov ShVAK aircraft gun and other models, which were developed and produced in Kovrov and are rightfully considered weapons of Victory.

At the plant they went from an ordinary worker to a designer, Heroes of Socialist Labor V.A. Degtyarev, S.G. Simonov, G.S. Shpagin, laureates of the State Prize S.V. worked fruitfully here for many years. Vladimirov, P.M. and M.M. Goryunovs, V.E. Voronkov and other talented inventors.

The main business for the factory team was the production of automatic small arms. But, at the same time, in the 1920s–30s, the plant constantly produced a variety of consumer goods, from the simplest household items, such as buckets, troughs, furniture, watering cans, to spare parts for agricultural machinery (in particular, for the first domestic tractors). production), starters for cars of the Nizhny Novgorod Automobile Plant, parts for gramophones. An important area was the production of cutting and measuring tools, and from the 1930s - metalworking machines both for their own needs and for other defense industry enterprises.

At the very beginning of the Great Patriotic War, the Degtyarev PTRD anti-tank rifle was designed, with which already in the fall of 1941 Red Army soldiers fought the enemy on the outskirts of Moscow. January 18, 1942 for exemplary fulfillment of Government tasks for the production and development of new types of weapons, Kovrov Plant No. 2 named after K.O. Kirkizha was awarded the Order of the Red Banner of Labor, and a large group of workers, specialists and managers received orders and medals.

Already during the war, the plant continued to modernize previously developed and design new models of small arms, in particular, the Goryunov SG-43 heavy machine gun and the large-caliber Vladimirov KPV (KPVT) were adopted into service with the Red Army. During the Great Patriotic War, plant workers were among the first initiators of the movement of front-line brigades that spread throughout the country. “The plant is the most important in the People’s Commissariat,” this is how the leaders of the People’s Commissariat of Armaments of the USSR assessed the role of the enterprise. Experts in the history of weapons and the defense industry note that most of the machine guns of all types produced during the war in our country were manufactured in Kovrov, and their number is comparable to the number of machine guns manufactured by the entire German industry. In total, during this period the plant produced and sent to the front 1 million 202 thousand 481 units of various weapons. The plant workers fought the enemy on all fronts; more than a thousand of them did not return from the battlefield.

On September 16, 1945, for the successful completion of tasks of the State Defense Committee to provide the Red Army with aviation and infantry small arms, the plant was awarded the Order of Lenin.

In the post-war period, the plant continued the design and production of small arms and cannon weapons. It was here, with the active participation of Kovrov specialists and workers M.T. Kalashnikov prepared the first samples of the AK-47 assault rifle for successful testing.

The firstborn of the plant is the K-125 motorcycle.

At the same time, in the second half of 1945, the plant was entrusted with the production of 12 types of civilian products, and in 1946 - mastering the production and production of a road motorcycle with a single-cylinder two-stroke engine with a cylinder capacity of 125 cm3. To fulfill the new assignment, the plant created an independent motorcycle production facility. By the end of 1946, 280 K-125 motorcycles were produced, and in 1949, 5,000 of them were produced per month. The Kovrov plant opened a new page in its work biography. Since the 1950s, the production of road and sports motorcycles with an engine capacity of 175 cm3 began; the Kovrovets and Voskhod models were exported to dozens of countries around the world and successfully participated in international rallies and competitions. In total, since the release of the first motorcycle, the plant has produced over 8 million units of motorcycle equipment. Since 1957, annual traditional winter motocross races began to be held in Kovrov, which were included in the calendar of all-Union and all-Russian competitions.

ATGM "Shmel"

Since 1959 at the plant named after V.A. Degtyarev began the production of missile weapons - first of its individual elements, and from the 1960s - anti-tank guided missiles and missiles “Shmel”, “Malyutka”, “Fagot”, “Faktoriya”, man-portable anti-aircraft missile systems “Strela-2”, "Strela-2M", "Igla-1".

Since 1959, the plant opened another fundamentally new line of production activity and began to produce for Minatom enterprises, as noted in 1997 in the greeting of the Chairman of the Government of the Russian Federation, “unique equipment for the separation of uranium isotopes, unrivaled in its characteristics in the world.”

On January 18, 1971, for the successful implementation of the five-year plan and the organization of production of new equipment, the plant was awarded the Order of the October Revolution.

Plant named after V.A. Degtyarev played a decisive role in the construction and development of new urban neighborhoods, schools, medical and sanitary units, higher and special education systems, city wastewater treatment plants, the Metalist stadium and the sports club named after V.A. Degtyarev, park of culture and recreation named after V.A. Degtyarev, Children's House of Culture "Degtyarevets".

In 1992, in accordance with the Decree of the President of the Russian Federation “On organizational measures for the transformation of state-owned enterprises into joint-stock companies,” the state enterprise Plant named after V.A. Degtyarev received the status of the Open Joint Stock Company “Plant named after V.A. Degtyarev".

In the last decades of the 20th century, the team of Degtyarev workers continued to master the production of the latest types of defense and civilian products according to the developments of the designers of JSC Plant named after V.A. Degtyarev" and partner companies: Instrument Design Bureau (Tula), Mechanical Engineering Design Bureau (Kolomna), research and production centers in Moscow, St. Petersburg, and other regions of the country.

JSC Plant named after V.A. Degtyarev entered the 21st century with a good reputation as a high-tech enterprise, equipped with modern equipment both in the main workshops and in auxiliary departments. The capabilities of the team increase many times thanks to the widespread introduction of computer technology at all stages - from the design and construction of individual products to the management of the enterprise as a whole. Powerful technical potential and highly qualified personnel, combined with a constant readiness to reorient production, serve as a strong basis for the prompt execution of the most complex work, taking into account constantly changing needs.

Today, the plant produces products whose level is widely known and appreciated in many countries around the world. OJSC ZiD produces weapons for the Air Force, Navy and ground forces of the armies of 17 countries. These are, first of all, the Igla 9K38 man-portable anti-aircraft missile system, the 9M133 missile of the Kornet-E long-range anti-tank system, the 30 mm AGS-30 anti-personnel automatic grenade launcher system, the 3UBK20 round with the 9M119M guided missile, designed to destroy armored vehicles and helicopters and targets located on the water surface. For aviation equipment, high-speed double-barreled guns GSh-30 and GSh-23 are produced.

For the Navy, ZiD OJSC produces a small-sized remote-controlled anti-sabotage grenade launcher system DP-65, designed to protect ships, hydraulic structures, marine and coastal objects from attacks by combat underwater saboteurs. The plant is carrying out work to improve it in the area of ​​remote detection of underwater targets and automatic fire control of the grenade launcher, which will certainly increase its combat effectiveness.

The plant's best shooting traditions continued with the production of the large-caliber (12.7 mm) Kord machine gun and sniper (12.7 mm) rifle.

For over 50 years, OJSC “Plant named after V.A. Degtyarev” has dominated the Russian market of motorcycle products. His arsenal includes a whole range of different equipment, ranging from small 36 cc motorcycles to 200 cc two-, three- and four-wheeled motorcycles.

For services to the development of Russian motorcycle production JSC "Plant named after. V.A. Degtyarev" was repeatedly awarded diplomas and memorable prizes at Russian and international exhibitions. "ZiD-50-Pilot" in 1999-2000. became a bestseller in the Russian market and, based on the results of 2001, was included in the top 100 best products in Russia.

In addition to motorcycle products, today OJSC “Plant named after V.A. Degtyareva" is engaged in the production of industrial sewing machines of class 0810, dry-charged batteries, packaging equipment for the food industry of class M6AP2T.

JSC Plant named after V.A. Degtyareva" maintains business relations with more than 1000 enterprises and firms both in Russia and abroad. Civilian and defense products bearing the ZiD brand are exported to dozens of countries around the world and are successfully demonstrated at the largest all-Russian and international exhibitions and fairs.

According to the magazine “Expert” of JSC “Plant named after V.A. Degtyarev" is one of the 200 largest companies in Russia.

The intensive long-term work of the largest team in Kovrov has a beneficial effect on the situation in the city as a whole, the development of the industrial and social spheres.

Favorite walk-behind tractors are produced at JSC Plant named after. Degtyarev". This is one of the leading enterprises in Russia for the production of soil cultivation equipment. Its products are distinguished by their build quality, low price (since domestic parts are used) and long service life.

In total, there are several modifications in the Favorit line of walk-behind tractors. Let's look at each of them in more detail.

This is a representative of the light class of walk-behind tractors. Its weight is only 67 kg.

The Favorit 1 walk-behind tractor is equipped with a ZiD gasoline engine with a capacity of 7 horsepower.

Fuel consumption on average is 1.3 liters per hour of operation.

The gearbox has 3 positions: 2 for driving forward and one for moving backward.

The ZiD 1 walk-behind tractor is designed for cultivating soft soils and caring for agricultural crops.

Motoblock Favorite MB 3

This is also a lightweight walk-behind tractor, but more advanced.

This device is equipped with a Briggs&Stratton INTEK 6.5HP gasoline engine.

The weight of the Favorite 3 walk-behind tractor is 73 kg.

There are 6 speeds (4 forward, 2 reverse).

Fuel consumption is similar to Favorit 1 – 1.3 liters per hour of intensive work.

Motoblock Favorite MB 4

This model is equipped with a Lifan four-stroke gasoline engine, which is similar to the Honda GX-220.

The weight of the Favorite MB 4 walk-behind tractor is 73 kg.

The gearbox has 6 speeds (4 forward and 2 reverse).

Fuel consumption is 1.5 liters per hour of operation.

Motoblock Favorit MB 5

This machine comes with axle shafts of different diameters.

In order to achieve optimal speed, a gearbox is used, which works with a belt drive in a gentle mode.

Large pneumatic wheels allow you to move on any surface.

Ground clearance is 15 cm.

Walk-behind tractors Favorite MB 5 are produced with several engines: ZiD (7.0 hp), Subaru Robin - EX21 (7 hp), Honda - GX160 (5.5 hp), Briggs&Stratton - Vanguard 6HP (6 hp). With.).

Attachments

Motoblocks Favorit have gained great popularity due to the fact that they can perform a huge amount of work using attachments. With low power there is low fuel consumption, but the functionality is much greater than that of a mini tractor.

Milling cutters

The basic attachment for a walk-behind tractor is a milling cutter. It is often sold complete with the Favorit walk-behind tractor. The advantage of ZiD OJSC products is that their width can be adjusted using axle shafts and a set of additional spare parts.

When working near crops, there is a high probability of damaging them. In order to prevent this, protective discs are installed at the end of the cutters.

Milling cutters are installed instead of pneumatic wheels.

Plow

A simpler classic attachment for mixing topsoil is a plow. It was used by people of ancient times.

OJSC "ZiD" offers its classic plow. Its weight is 10 kg. It is designed for an average plowing speed of 2.5-3.5 km/h.

The warranty period is 5 years.

Plow and hitch for the Favorit walk-behind tractor

An improved model is the reversible plow. It has a special shape of a ploughshare, which, before throwing, first turns the earth over several times, and only then throws it to the side.

Plowing occurs as follows: the first rut is made, then one wheel is placed in it, and the plow is lowered into the ground. Thus, the second track buries the first. Thanks to the rotary handle, you can control the Favorit walk-behind tractor while moving from its side and not trample the trench.

Mowers

The lush growth of weeds causes a lot of trouble in cleaning them. Motoblocks Favorit together with a mower can help solve this problem.


ZiD offers the KR-3 rotary mower. It is designed for mowing ordinary grass and rough-stemmed plants in small areas, roadsides, etc. The mower allows you to protect the operator from flying grass and stones thanks to the high protective side.

The height of the captured grass is 3 cm.

The rotor speed is 2570 rpm.

Mowers perform well when making hay for the winter, since all that remains is to collect the dried grass.

Potato digger and potato planter

Potatoes are a very common crop in our country. However, working with it involves a lot of physical labor. Favorit walk-behind tractors along with attachments can help with this.

The potato planter is designed for planting potatoes. The potato planter has the following device: in front there is a plow that breaks the rut, behind there is a tank with a conveyor belt for feeding potato tubers. Two hillers are buried behind the trench.

After the root crops ripen, they need to be collected.


Potato planter KSP-02

To dig up potatoes, you can use an ordinary plow, but it has a drawback: it cuts a large number of tubers.

A vibrating potato digger is considered more professional. In front of it there is an active knife, which cuts the layer of earth and feeds it to the screen (steel rods), where the piles of earth are broken, and only fruits remain on the surface. Then the operator can only harvest the crop.

Snow blower and shovel

To clear snow in winter, you can use the Favorit walk-behind tractor together with the SM-2 snow blower from ZiD OJSC.

In front of it there is a pulley for collecting snow, then it falls on the rotor, where it unwinds and is thrown to the side.

The height of the snow cover is 17 cm.

The range of ejection of the bulk of the snow cover by the SM-2 snow blower is 5 m.

The average speed is 2-4 km/h.

The weight of the SM-2 snow blower is about 55 kg.

Motoblock snow blower SM-1 “Favorit” Shovel-dump

A simpler attachment for snow removal is a shovel blade. This is a sheet of metal curved in an arc and located at an angle, with an active knife installed at the bottom for cutting hard layers of snow.

The overall dimensions of the blade blade are as follows: 495×1000×400 mm.

The rotation angle can be adjusted ±20°.

The average speed of the Favorit walk-behind tractor together with a blade-shovel is 2.5-5 km/h.

Favorit walk-behind tractors come standard with pneumatic wheels of sizes 4.00-10 or 4.5-10. However, due to their low weight, they often slip and slip when receiving increased loads.

Therefore, if it is necessary to increase grip on the ground, it is recommended to use lugs. They are a metal rim with welded herringbone plates.

Caterpillars

When transporting loads in winter, traction is a big problem, since even lugs often do not help. In this case, pneumatic wheels can be replaced with tracks. They increase the contact area of ​​the device with the ground, thereby improving the ride.

When choosing tracks, you need to pay attention to their width. The larger it is, the better the grip on the surface. However, this will make it harder for the engine to power it, since tracks are very heavy equipment.

Weights

Another way to improve the adhesion of the Favorit walk-behind tractor to the surface of the earth is to give it additional weight using weights. Factory weights are produced in the form of 18 kg pancakes, which are hung on the wheel frame in front of the wheel.

Usually two pancakes are hung. In total, instead of 70 kg, you can get a device weighing 110 kg.

Adapters

While working with the Favorit walk-behind tractor, there is a lot of physical strain on the operator, since he has to move behind it while standing and direct the movement. When performing long-term work, it is recommended to use adapters.

This is a special attachment with a chair, thanks to which you can do work while sitting.

User manual

Service

The key to long-term operation of the machine is proper care of it.

  • The machine should only be used for its intended purpose;
  • Before starting maintenance of the walk-behind tractor, it is necessary to allow the engine to cool;
  • Before carrying out work, it is necessary to inspect the walk-behind tractor for unnatural position of parts or their wear;
  • At the end of the work, clean the Favorite from any remaining dirt, dust or grass;
  • Avoid contact with water, as this may damage the device;
  • Engine oil should be changed every 25 hours of operation; it is recommended to use semi-synthetic 10W-30 or 10W-40;
  • After 100 hours of operation of the Favorit walk-behind tractor, it is necessary to change the transmission oil; the manufacturer recommends using Tad-17i, Tap-15v or their analogues.
  • It is necessary to monitor the condition of the air filters, spark plugs and clutch cable.

Run-in

The key to long-term and stable operation is the correct assembly and start of use of the Favorit walk-behind tractor.

Before starting full-fledged work, it is necessary to run-in the device. This means using it at half the maximum power. During break-in, the attachment should not be immersed in the ground more than 10 cm.

Running in is done so that the parts of the Favorite walk-behind tractor fall into place and get used to each other. After all, in the factory assembly there will definitely be some minor errors.

Upon completion of break-in, change the engine oil.

Basic faults

Favorite walk-behind tractors are reliable equipment. However, even they tend to break down periodically, since they are machines. Their owners should know how to repair basic faults:

Reasons that the engine does not start:

  • Empty fuel tank;
  • Poor quality gasoline;
  • The throttle control lever is in the wrong position;
  • The spark plug has failed or is dirty;
  • Low oil level in the crankcase.

Reasons why the engine runs intermittently:

  • The contact on the spark plug comes off;
  • Old or dirty gasoline is used;
  • The vent on the tank lid is clogged with debris;
  • The air filter is dirty;
  • Problems with the carburetor.

If the walk-behind tractor vibrates strongly, this is a signal that the cutters are installed incorrectly, are damaged, or the fasteners are loose.

Video reviews

This video demonstrates the operation of the Favorit walk-behind tractor with a ZiD plow:

Snow removal with a walk-behind tractor Favorite:

Here is a video of how potatoes are hilled:

Motoblocks Favorit are multifunctional equipment designed to perform various municipal, agricultural and transportation tasks.

The units are used with a large number of attachments and are suitable for the following operations:

  • water supply;
  • cultivation;
  • plowing;
  • mowing grass;
  • harrowing;
  • sweeping;
  • hilling;
  • transportation;
  • snow removal.

Description

The manufacturer of Favorite walk-behind tractors is the Degtyarev plant (ZiD company). This is a modern and diversified enterprise, considered one of the main engineering plants in Russia and the largest plant in the Vladimir region. Its history began during the First World War. Then the facilities for creating machine guns were located here. In 2016, the plant turned 100 years old. Now the company’s product line includes a wide range of various equipment, including both high-speed motorcycles and small-capacity cultivators. The ZiD company produces mainly military equipment. However, the plant also produces civilian devices - Leader motor-cultivators and Favorite motor-blocks. The military specialization of the enterprise guarantees the high quality of all products it produces.

The Favorite line of walk-behind tractors is represented by a large number of models, differing in technical characteristics and types of installed motors (from well-known brands Briggs & Stratton and Honda to budget Chinese units). Most modifications have a manual start, but there are also versions with electric start.

The construction scheme of Favorite walk-behind tractors is classic. It is based on the following elements: a gear reducer, complemented by a gearbox, a motor with a horizontal crankshaft and a belt drive. The power take-off pulley is located on the other side of the gearbox and is placed separately. Favorite models have good control, and the handles are adjustable in 2 planes. Belt drive pulleys with 2 grooves each are “reversible”. If necessary, one drive belt can be turned 180 degrees. There is also a gear shift knob on the gear housing. Other controls are cable operated. For ease of parking, all Favorite models are equipped with a folding stand.

Another feature of these walk-behind tractors is perfect balancing, providing excellent maneuverability and stability. The steering wheel of the vehicle can be adjusted in terms of rotation angle in the horizontal plane and height. Special anti-vibration handles reduce the negative impact of vibration on the hands, making work easier. The handles themselves are made of reliable plastic, which prevents injury to the palms during operation.

As standard, walk-behind tractors have basic cutters that allow you to till the soil. All Favorit equipment is equipped with pneumatic tires, providing ground clearance of 150 mm and improving functionality during the transportation of goods. The brand’s walk-behind tractors provide the ability to adjust the width of one-time soil cultivation, which allows the unit to be used in areas of different shapes and sizes.

Painting of walk-behind tractors is carried out using a special technology using powder dye that has high adhesion to the surface. Thanks to this, the appearance of the equipment is preserved for a long period.

Most buyers purchase Favorit walk-behind tractors intending to use them with additional equipment. The delivery set for this equipment includes a pair of pneumatic wheels and tillage cutters.

Attachments and trailed equipment used on Favorite walk-behind tractors:

  • special lugs (various types). Used for working on virgin soil and heavy soil;
  • milling hiller. Installed in place of the base cutters. The equipment is designed for processing row crops. After cultivation, the soil is optimal for planting various crops;
  • two-row hiller. Provides fast and high-quality processing of light soil. The hiller can be configured taking into account the specific soil type and technical characteristics of the walk-behind tractor;
  • single-row hiller. Intended for processing light soil. Installation of equipment is carried out using a hitch.
  • mounted potato digger. Used to extract various root crops from the ground;
  • digger. It is used on various types of soil (on heavy soil and virgin soil exclusively with lugs). The equipment has the ability to be specially configured and adjusted to suit individual needs;
  • plow. Designed for cultivating light and medium soil;
  • rotary mowers (KR-2 and KR-3). They have different processing widths and productivity (average 0.18 ha/hour);
  • carts with a chair with a load capacity of up to 500 kg;
  • blade for leveling the soil and removing snow. The snow throw range reaches 5000 mm, the working width is 560 mm;
  • adapter with seat. Allows you not to walk next to the equipment while working, but to drive. It is especially convenient to use it in conjunction with a trailer, which converts the walk-behind tractor into a small cargo transport.

An important point for owners of Favorit products is the ability to quickly and seamlessly purchase additional equipment and spare parts if necessary. In Russia they are offered in a large assortment and at an affordable price.

Run-in

Motoblocks Favorit are reliable equipment with a long service life. However, it needs proper and regular maintenance. During the first hours of operation, it is necessary to run-in the device. During this period, the main elements are broken in and the equipment systems are checked, therefore it is not recommended to turn on high speeds. Run-in begins with inspecting the walk-behind tractor, adding oil and fuel. After this, the engine starts. It should idle for at least 30 minutes. After this, you can gradually increase the power. At the same time, the performance characteristics of the model are actively reviewed, work is performed in all gears, and possible problems are identified. Run-in of Favorite walk-behind tractors is usually performed at 30-50% of their capabilities. Thus, it is better to perform cultivation at a depth of no more than 100 mm, and transport cargo with a mass of 150-200 kg. It is unacceptable to overload equipment during this period, as this can cause serious damage. The duration of the running-in should not be less than 18-20 hours. Upon completion of the process, the engine oil is replaced. After break-in, periodic maintenance should be performed, which will help to maximize the service life of the device.

https://youtu.be/z3JnCg1A5rQ

It is no coincidence that Favorit motoblocks are very popular among Russians. The main advantage of these models is reliability and high technical characteristics, which are complemented by accessibility and ease of maintenance. The equipment is ideal for summer residents and gardeners who decide to reduce wasted time on their site.

Models

The Favorit brand has one of the widest lines of walk-behind tractors, differing in engine types and individual parameters.

Favorite MB with Robin-Subaru EX17 engine

Specifications

The Favorit MB series with the Robin-Subaru EX17 engine is suitable for use in medium-sized areas. The model is intended for intensive use. Sufficient weight allows the equipment to cope even with an area that has not been processed for a long time. This model is used with all additional Favorit equipment, which significantly expands its capabilities. The device is equipped with a reliable transmission (2 forward, 1 reverse gears) and a gear reducer.

Characteristics of the walk-behind tractor:

  • length – 925 mm;
  • width – 660 mm;
  • height – 940 mm;
  • weight – 73 kg;
  • processing depth – 250 mm;
  • load capacity – up to 400 kg;
  • recommended processing area – up to 30 acres;
  • maximum speed – 11 km/h.

Engine

The model is equipped with a professional 4-stroke petrol unit Subaru-Robin EX 17 D OHC (Japan) with air cooling. The unit has an overhead valve drive and an inclined cylinder arrangement and is characterized by an increased service life (up to 5000 operating hours).

Motor characteristics:

  • working volume – 169 cc;
  • torque - 11.3 Nm;
  • number of cylinders – 1.

Fuel consumption

Fuel consumption rate is 1.1-1.2 l/hour. Fuel tank capacity – 3.6 l.

Price

The cost of the model is from 39,900 rubles.

Analogs

  • OKA MB-1D1M13 Robin Subaru EX-17;
  • Neva MB-2S-6.5 PRO;
  • Ugra NMB-1N9 Robin Subaru EX 17;
  • Salyut-100 RM1.

Favorite MB with Robin-Subaru EX21D engine

Specifications

Favorite MB with the Robin-Subaru EX21D engine is a series of heavy-duty walk-behind tractors for working on large areas. Thanks to its significant weight, the equipment confidently copes with processing virgin soil, and a mechanical transmission with 2 forward and 1 reverse speeds ensures excellent maneuverability.

Characteristics:

  • length – 925 mm;
  • width – 660 mm;
  • height – 940 mm;
  • weight – 73 kg;
  • processing depth – up to 250 mm;
  • processing width – 350, 620 and 890 mm;
  • maximum speed is 11 km/h.

Engine

The series is equipped with a 4-stroke gasoline engine Robin-Subaru EX21 SERIES PREMIUM (Japan) of a professional level, which is characterized by smooth and quiet operation, low fuel consumption and a large margin of safety. Air cooling allows the motor to withstand extreme loads for a long time.

Unit characteristics:

  • working volume – 169 cc;
  • number of cylinders – 1.

Fuel consumption

Price

The cost of the model is from 42,990 rubles.

Analogs

  • Neva MB-2S-7.5 PRO;
  • Ugra NMB-1N10 Robin Subaru EX 21 PREMIUM;
  • Oka MB-1D1M14 Subaru EX21.

Favorite MB with Honda GC160 engine

Specifications

Favorite MB with a Honda GC160 engine is a multifunctional piece of equipment designed to perform various soil cultivation tasks.

Characteristics:

  • length – 925 mm;
  • width – 660 mm;
  • height – 940 mm;
  • weight – 67 kg;
  • transmission type – mechanical 3-speed (2 forward, 1 reverse);
  • processing depth – up to 250 mm;
  • processing width – 350, 620 and 890 mm;

Engine

The walk-behind tractor is equipped with a reliable 4-stroke gasoline engine Honda GC160 OHV (Japan) with air cooling and the following characteristics:

  • working volume – 160 cc;
  • torque - 9.4 Nm;
  • number of cylinders – 1.

Fuel consumption

Fuel consumption rate is 1.0-1.1 l/hour. Fuel tank capacity – 1.8 l.

Price

The cost of the model is from 34,500 rubles.

Analogs

  • Eurosystems Euro 5 EVO RM S/R Honda GC160;
  • Salute 5X Honda GC160.

Favorite MB with Honda GX 160 engine

Specifications

Favorite MB with the Honda GX 160 engine is a series of mid-class walk-behind tractors designed for medium-sized areas. The model uses a transmission with 2 forward and 1 reverse gears.

Characteristics:

  • length – 925 mm;
  • width – 660 mm;
  • height – 940 mm;
  • weight – 73 kg;
  • processing depth – up to 250 mm;

Engine

The walk-behind tractor is equipped with a 4-stroke petrol engine Honda GC160 OHV with air cooling and overhead valves.

Unit characteristics:

  • working volume – 160 cc;
  • rated power - 5.5 hp;
  • torque - 9.4 Nm;
  • number of cylinders – 1.

Fuel consumption

Fuel consumption rate is 1.1-1.3 l/hour. The fuel tank holds up to 2 liters of fuel.

Price

Analogs

  • Salute 5X Honda GC160 OHV;
  • DDE V 700.

Favorite MB with Honda GC190 engine

Specifications

Favorite MB with a Honda GC190 engine is a multifunctional walk-behind tractor designed to perform various operations with soil. The model is equipped with a basic transmission with 2 forward and 1 reverse gears.

Characteristics:

  • length – 925 mm;
  • width – 660 mm;
  • height – 940 mm;
  • weight – 73 kg;
  • processing depth – 250 mm;
  • processing width – 350, 620 and 890 mm.

Engine

The model is equipped with a 4-stroke gasoline engine Honda GC190 OHV (Japan) with air cooling and the following characteristics:

  • working volume – 190 cc;
  • rated power - 6.0 hp;
  • torque - 11.2 Nm;
  • number of cylinders – 1.

Fuel consumption

Fuel consumption rate is 1.2-1.3 l/hour. Fuel tank capacity – 1.5 l.

Price

The cost of the model is from 36,000 rubles.

Analogs

  • Salute 5X 6.0.

Favorite MB with Honda GX 200 engine

Specifications

Favorite MB with Honda engine GX 200 is the most powerful model of the brand with a Honda engine. Equipped with a 3-speed transmission (2 forward, 1 reverse) and a gear reducer.

Characteristics:

  • length – 925 mm;
  • width – 660 mm;
  • height – 940 mm;
  • weight – 75 kg;
  • processing depth – 250 mm;
  • processing width – 350, 620 and 890 mm.

Engine

The walk-behind tractor is equipped with a 4-stroke petrol engine Honda GX 200 (Japan) with air cooling.

Engine characteristics:

  • working volume – 196 cc;
  • torque - 12.4 Nm;
  • number of cylinders – 1.

Fuel consumption

Fuel consumption rate is 1.3-1.5 l/hour.

Price

The cost of the model is from 36,540 rubles.

Analogs

  • Salyut-100 Honda GX 200;
  • Agate X6.5;
  • Weima WM1050.

Favorite MB with B&S Vanguard 6.0 engine

Specifications

Favorite MB with the B&S Vanguard 6.0 engine is a series of entry-level walk-behind tractor with a reliable motor. Among the features of the model are the Oil-Guard system (switching off the engine when the oil level is low) and an enlarged muffler.

Characteristics:

  • processing depth – 250 mm;
  • processing width – 350, 620 and 890 mm;
  • weight – 75 kg;
  • travel speed – 3-11 km/h.

Engine

The walk-behind tractor is equipped with a 4-stroke petrol unit B&S Vanguard 6.0 (Japan) with increased torque.

Motor characteristics:

  • working volume – 198 cc;
  • rated power – 6 hp;
  • number of cylinders – 1.

Fuel consumption

Fuel consumption indicator is 1.3 l/hour. Fuel tank capacity – 3.6 l.

Price

The cost of the model is from 34,000 rubles.

Analogs

  • Salyut-100 BS-V 6.0;
  • Neva MB-2B-6.0-2.

Favorite MB with B&S Vanguard 6.5 engine

Specifications

Favorite MB with the B&S Vanguard 6.5 engine is a powerful mid-class walk-behind tractor capable of mechanizing various jobs.

Characteristics:

  • length – 925 mm;
  • width – 660 mm;
  • height – 940 mm;
  • weight – 73 kg;
  • processing depth – 250 mm;
  • processing width – 350, 620 and 890 mm;
  • movement speed – 3-11 km/h;
  • transmission type – mechanical (2 forward gears, 1 reverse gear).

Engine

The walk-behind tractor is equipped with a 4-stroke petrol unit B&S Vanguard 6.5 with the following characteristics:

  • working volume – 205 cc;
  • rated power - 6.5 hp;
  • number of cylinders – 1.

Fuel consumption

Fuel consumption rate is 1.3-1.4 l/hour. Fuel tank volume – 3.6 l.

Price

The cost of the model is from 35,000 rubles.

Analogs

  • Neva MB-2B-6.5 PRO;
  • Agat BS-1 6.5.

Favorite MB with ZID 173F engine

Specifications

Favorite MB with the ZID 173F engine is a series of entry-level budget walk-behind tractors with a diesel engine. The model has low fuel consumption and is suitable for processing medium-sized areas.

Characteristics:

  • processing depth – 250 mm;
  • processing width – 350, 620 and 890 mm;
  • weight – 73 kg;
  • transmission type – mechanical (2 speeds forward, 1 speed reverse).

Engine

This series is equipped with a 4-stroke air-cooled diesel unit ZID 173F (China).

Engine characteristics:

  • working volume – 284 cc;
  • rated power – 6 hp;
  • number of cylinders – 1.

Fuel consumption

Fuel consumption rate is 1 l/hour. The fuel tank holds 3.9 liters of fuel.

Price

The cost of the model is from 33,600 rubles.

Analogs

  • Crosser CR-M6;
  • Patriot Boston 6D;
  • Weima WM1100A WM178F 6.0.

Favorite MB ZID 170F

Specifications

The favorite is MB ZID 170F - a series of budget walk-behind tractors with high-power gasoline units. The model has a gear-chain reducer and a 3-speed gearbox (2 forward, 1 reverse).

Characteristics:

  • length – 925 mm;
  • width – 660 mm;
  • height – 940 mm;
  • weight – 67 kg;
  • processing depth – 250 mm;
  • processing width – 350, 620 and 890 mm.

Engine

The walk-behind tractor is equipped with a 4-stroke petrol unit ZID 170F (China) with air cooling.

  • working volume – 206 cc;
  • rated power – 7 hp;
  • number of cylinders – 1.

Fuel consumption

Fuel consumption rate is 1.3-1.5 l/hour. Fuel tank capacity – 3.8 l.

Price

The cost of the model is from 29,000 rubles.

Analogs

  • DDE TG-95Nev V 950 II;
  • Salyut 100 HVS-01 Hwasdan 7.0;
  • OKA MB-1D1M19.

Favorite with Lifan 6.5 engine

Specifications

The favorite with the Lifan 6.5 engine is a series of walk-behind tractors with a high-quality Chinese engine and gear reducer.

Characteristics:

  • processing depth – 200 mm;
  • processing width – 350, 620 and 890 mm;
  • weight – 73 kg.

Engine

The walk-behind tractor is equipped with a 4-stroke air-cooled Lifan 168F-2 petrol unit. This motor is one of the most popular and is used for a wide range of equipment. Due to the cast iron cylinder liner, the unit has an increased service life.

Engine characteristics:

  • working volume – 196 cc;
  • rated power - 6.5 hp;
  • torque – 11 Nm;
  • number of cylinders – 1.

Fuel consumption

Fuel consumption rate is 395 g/kW per hour (about 1.2-1.3 l/hour). Fuel tank capacity – 1.5 l.

Price

The cost of the model is from 25,000 rubles.

Analogs

  • Tselina 601;
  • OKA MB-1D1M10;
  • Salute 100 Lifan 168F-2.

Favorite MB with Veima 6.5 engine

Specifications

Favorite MB with a Veima 6.5 engine is a series of walk-behind tractors with Chinese engines. This model has gained little popularity in Russia.

Characteristics:

  • length – 890 mm;
  • width – 460 mm;
  • weight – 83 kg;
  • height – 660 mm;
  • processing depth – up to 300 mm;
  • processing width – 350, 620 and 890 mm.

Engine

The model is equipped with a 4-stroke petrol engine WEIMA WM168FB (China) with air cooling and the following characteristics:

  • working volume – 196 cc;
  • rated power - 6.5 hp;
  • torque - 13.2 Nm;
  • number of cylinders – 1.

The WEIMA WM168FB motor is comparable in its characteristics to Briggs&Stratton and Robin Subaru engines, but costs much less.

Fuel consumption

Fuel consumption rate is 360 g/kW per hour (about 1.3-1.5 l/hour). Fuel tank capacity – 3.6 l.