Mazda

Pandora dxl 3210 with a standard key. Car alarms. High operational reliability

The Pandora 3210 alarm system belongs to the middle price segment of the market, but it has functionality that will reliably protect the car. The presence of feedback makes it possible to control the condition of the car from a distance.

[Hide]

System Description

The Pandora DXL 3120i Slave or Can anti-theft complex cannot be called a full-fledged telematics system. But even in the standard configuration, the consumer has all the tools necessary to monitor the condition of the car. The user can use digital bus protocols, as well as advanced functionality for working with a PC. The connection is made via a mini-USB output. For interaction between the car owner and the complex, radio frequency communication channels can be used, as well as a key with a radio tag installed inside.

Specifications

Brief description of the technical properties of the Pandora 3210 model:

The use and launch of anti-theft systems is allowed in cars with an on-board power supply, the voltage in which is from 9 to 15 volts. The best option would be to install the alarm in a 12-volt on-board network. Use of this model on motorcycles is permitted, but not recommended.
Devices not installed as standard on the vehicle will consume no more than 40 mA of current when the protective mode is activated.
The temperature range at which the alarm performs all its functions without interruption will be from -40 to +85 degrees.
The electronic alarm control unit is equipped with a 32-bit microcontroller. The device belongs to the ARM32 line of devices.
The main microprocessor unit is equipped with three relays rated at 10 amperes. These components are characterized by ease of configuration and programming.
The microprocessor device is equipped with a memory unit characterized by non-volatility. It stores information about all alerts and events that occurred with the alarm in the absence of the driver.
Possibility of simplified and quick programming of standard functions through the use of special DIP switches. These elements are located on the back of the microprocessor device.
The alarm is equipped with a built-in USB output. Its presence provides the ability to configure and program options. By connecting to a computer, it is possible to update the signaling software. This need may arise as a result of updating or changing the list of CAN protocols.

The Pandora Alarm channel presented a detailed overview of the technical parameters and features of the model 3210 anti-theft system.

Equipment

The modern anti-theft installation Pandora 3210 includes the following devices and elements:

The electronic unit. Used to control the anti-theft complex, equipped with switches, connectors and outputs for connecting main equipment.
Service user manual. The documentation indicates all the features of installation and connection of elements, as well as their operation.
Plastic card. It contains a special code for emergency control of the alarm.
Three contact elements. They are used for grounding.
Limit switch cables, two pieces.
The switch itself. The package includes two devices, which allows them to be mounted on the hood and tailgate.
The service key with the inscription Jack is intended for effective use and service disabling of the alarm.
Led indicator. Designed to determine the alarm status.
A set of wires for connecting all signaling components. Intended for connecting devices, as well as relay outputs.
Two communicators. One of them is the main one and has a two-way communication option; it is equipped with a display with icons. The second one is not equipped with a screen and a feedback option; it is considered a spare, since its range is lower.
Two protective cases for each communicator.
RF module with wire for connection.

The siren is not included in the Pandora 3210 package; this device must be purchased separately.

Key Features

Features of the Pandora anti-theft system:

Availability of CAN interface. Provides simplified installation of the complex with the possibility of minimal intervention in the standard electronics and on-board network.
Full protection of the machine perimeter is ensured due to the presence of security zones.
The presence of shock, tilt and motion controllers. These devices record not only physical impacts on the car body, but also determine the jacking of the car. Sensors can warn the car owner about the possible evacuation of the car.
Turbo timer. Using this device will prevent accelerated wear of the car engine.
Availability of Slave mode. Its use provides the ability to control the anti-theft complex not only through the key fob, but also through other external devices. You can configure control of Pandora 3210 using a communicator from a standard anti-theft installation, a keyless entry device or a GSM module.
Option to open the tailgate.
Ability to control power windows. We are talking about electrical devices. With proper programming, you can set the power windows to close automatically when the protection mode is activated.
The ability to control the pre-start heating device by analogue.
Support connecting digital machine motor lock relay. This will ensure a complete stop of the power unit in the event of an unauthorized engine start.
Availability of power analog outputs.
Possibility of turning on the security option when the power unit is running. A convenient feature if the driver does not plan to stop for a long time.
Option to automatically activate the protection mode. If the driver turns off the alarm but does not open any doors, then after a certain time the security mode will be reactivated. The time interval can be configured by the user.
Possibility of silent activation and deactivation of protection mode.
Availability of a delay option when activating the protection mode.
Option to search for a car in the parking lot. A convenient option for drivers who often leave their cars in large parking lots near shopping centers. When the function is turned on, the car’s external optical equipment is activated, and the car’s headlights begin to blink.
Panic mode will provide temporary activation of optical devices and a siren when suspicious people appear near the car.

The main features of the communicators that are included in the Pandora 3210 kit:

The device was developed on the basis of the 2500 and Deluxe models of anti-theft systems.
The main feature of the communicator is that the developers began to use the end position of the keys to control the signaling.
The design of the device uses an improved hanging system. This ensures a tight seal as well as a smooth key click.
The device is supplied to the market in a protected and shock-resistant housing. This ensures the prevention of mechanical damage when using the signal.

Alexey Golovashchuk demonstrated the operation of the Pandora 3210 signaling comfort option installed on a Skoda Octavia car.

Advantages and disadvantages

Advantages of the Pandora 3210 car alarm:

High range of the system. We cannot say exactly about the actual parameters of the communicator’s range, since it depends on external factors. We are talking about the architectural features of the area, weather conditions, and interference. But even with serious interference, the transmission of impulses will be of high quality.
The presence of a CAN interface is one of the main advantages for use in modern machines.
Rich functionality. For such a price, the alarm has many useful functions and features.
The optimal ratio of cost and quality, this advantage is confirmed by many consumers.

In accordance with the reviews, the following disadvantages should be highlighted:

Too few power signal outputs.
Rapid discharge of the power supply in the communicator. With intensive use, the anti-theft system key fob will discharge much faster. The consumer is recommended to carry a spare battery with him so that in the event of a complete discharge he can control the alarm.
Despite the manufacturer's statements that the alarm is equipped with a durable communicator, in fact this is not entirely true. Users note that the device is fragile; after several falls, the glass may crack. But if necessary, the user can order a new display from China; these elements are available for sale.

The Autoelectro channel presented a brief overview of the Pandora 3210 alarm system installed on a Nissan Beetle.

How to install?

In order to correctly install and connect system elements, the following requirements must be taken into account:

The electronic control module, antenna adapter, and additional controllers are installed only inside the car. Placing these devices under the hood or under the bottom of the car will lead to their rapid failure.
Each component of the anti-theft complex must be securely fixed in the seat. This is due to the fact that as a result of accelerations and vibrations, sensors and devices quickly fail.
Installation of the anti-theft system is carried out with the alarm plugs disconnected. In some cases, the battery may need to be disconnected. But this should not be done if the car is equipped with airbags or a car radio with a code. Before disconnecting the battery, it is recommended to read the service documentation for the machine.
Installation of CAN bus cables is carried out with the electronic module disconnected.
Installation of other devices that are not included in the standard package is carried out in accordance with the manufacturer's recommendations. For example, the installation of a siren must be carried out in the engine compartment, the horn of the device rotates downwards. This will prevent moisture from accumulating inside. When installing, you must choose a place protected from high temperatures and moisture.
Laying electrical signal circuits is allowed by twisting and soldering using lead solder with tin. If soldering is used, the switching point must be insulated using special tape or heat shrink tubing.
When connecting power lines to each other, you need to pay attention to the cross-section of the cables, as well as the materials from which they are made. It is important that electrochemical potentials are kept to a minimum and an intermediate conductor can be used for this purpose. The element can be a small piece of cable or a washer made of a material with an intermediate potential. After connection, make sure that the insulating layer does not allow moisture to pass into the contact area of the electrical circuits. Its presence will lead to rapid destruction of cables, in particular, we are talking about power lines with a large flow of current.
It is recommended to raise all connections as high as possible in the channels where they are laid. This will prevent the negative effects of condensation of water vapor that falls on the cables. Eliminates the possibility of corrosion.
When connecting cables, you need to leave a small margin in length so that the power lines sag a little. This will prevent damage to the joints due to vibration while driving.
When installing, it is prohibited to lay electrical lines in places where damage or destruction of the insulating layer may occur as a result of friction.
Wires from the siren and other components installed under the hood are routed into the body through a special technological hole in the partition. When laying, it is necessary to take into account the need to protect the insulating layer, as well as restore the anti-corrosion coating. It is recommended to use special rubberized or plastic bushings. Alternatively, you can lay cables in special holes for standard power lines.
All electronic devices should be placed as high as possible, and the unit connectors should be directed downward. This will prevent condensation from flowing into the circuit through the wires.
The electronic car alarm module is equipped with a built-in shock sensor. Therefore, when installing and fixing it, it is necessary to ensure high-quality fastening of the device to the body, which will allow the built-in sensor to work as accurately as possible. If the fastening is unreliable, this will lead to a decrease or increase in the sensitivity parameter.
When connecting all components, use the diagram included in the package. In this case, it is necessary to take into account the maximum switching currents, as well as the polarity of the contacts and signal outputs.
All leads of the anti-theft system that were not used during installation must be shortened and securely fixed. This should be done to prevent accidental contact with the car body and other electrical lines.

User manual

Correct operation of the Pandora 3210 alarm system is possible only after programming the control panel.

Designation of buttons and icons on the key fob

Designation of indicators on the key fob Designation of indicators on the key fob Purpose of key fob buttons Purpose of key fob buttons Purpose of key fob buttons

Setting up the key fob

Binding a communicator to control the alarm:

The programming procedure is performed with the ignition off. Find the Valet service key and click on it once. The siren speaker will play one sound pulse.
If you are pairing the main remote control with the screen, you must simultaneously click on three keys on the communicator. The buttons are held in this state until the pager emits one sound pulse. The siren will also play one signal, this indicates successful pairing of the device.
When binding an additional communicator, all three buttons on the device are also clicked. They are held until the diode indicator begins to blink.
When all communicators are registered in the memory of the microprocessor unit, the Valet service key is clicked again. After this, the electronic module will save the recording information in its memory, and the alarm will exit the binding mode.
The ignition is turned on and off by turning the key in the lock to the appropriate position.

Binding of each communicator must be completed in 20 seconds. If the interval between recordings is longer, the programming procedure will have to be started again.

The Satellite World channel talked about the procedure for adjusting the volume of the Pandora 3210 communicator.

Condition monitoring

The alarm status monitoring option is used to provide the car owner with information about the temperature of the engine, inside the cabin, etc. The data is transmitted from the electronic unit. To activate the function, you need to place the cursor on the pager screen in the position of the Check indicator; movement is performed using the key with the F symbol. After setting the cursor, click the button with the symbol in the form of a locked padlock, this will lead to sending a command to request the status. For ten seconds, the temperature in the cabin, under the hood of the car, will be displayed on the communicator screen. Information about the voltage in the car's electrical network will also appear.

To exit the status check mode, you need to click on the key with the F indicator. If you do not take any action, the anti-theft installation will automatically leave the binding mode after ten seconds. To go to the event history viewing menu, click on the button in the form of an open lock. Interior and engine temperature sensors are not included in the package, so to configure this function, additional devices must be installed.

Implementation of autorun

Pandora 3210 alarms do not officially support the ability to automatically start the engine. But this function can be implemented based on the anti-theft system as an option. You can configure the possibility of remote start using temperature controllers, as well as additional relays. Through them, an impulse is sent from the communicator to the microprocessor unit, and from there to the outputs of the motor control system. The relay device must be added to the anti-theft alarm infrastructure in advance.

You can enable and configure autostart only if you correctly bypass the engine blocker. Therefore, when installing a signaling system, the consumer must provide for the installation of a transponder in the form of an unlocker. Using a temperature controller will provide the ability to set certain heating modes in the car interior. All other functions with the definition of time intervals are provided in the settings of the program influence of the microprocessor module with a remote control.

The AvtoGSM channel spoke in detail about the features of implementing the remote start function in the Pandora 3210 alarm system.

Setting the sensitivity of the sensors

Adjusting the sensitivity parameter of the shock controller is done as follows:

Go to the programming menu. To do this, move the cursor on the screen using the F key to an indicator in the form of a hammer that hits the surface.
Once selected, click and hold the key with the open padlock symbol for three seconds. The selected indicator will blink, this indicates that the alarm level parameters of the controller have been configured.
Brief clicks on the locked key increase the sensitivity parameter. Each press increases the value by one step. Use the button with the open lock symbol to decrease the parameter value.
The warning zone is also configured. To switch programming modes, use the F button.
When the operating parameters are set, hold down the key in the form of a locked lock for one second. If the user does not take any action to configure within ten seconds, the alarm will automatically exit the menu.

The motion controller parameters are adjusted as follows:

Go to the settings menu. Use the F key to select the indicator in the form of an arrow pointing to the lower left corner.
The key with the symbol in the form of an open lock is pressed for three seconds, the previously selected indicator will begin to blink.
By briefly clicking on a button with a locked lock, the sensitivity parameters are increased. To decrease, use the open key.
To leave the setup mode, you need to hold down the button with the symbol in the form of a closed lock.

Download the installation and operating instructions for the Pandora 3210 alarm system in PDF format

The service manual, which will allow you to use and configure the alarm, can be downloaded from the link:

What is the price

Video “Instructions for using the key fob”

Sergey Maslov spoke in detail about the features of the operation and programming of the communicator for controlling the Pandora 3210 car alarm.

In front of you alarm Pandora DXL 3210- a high-tech security system with the option of direct connection to the car’s CAN bus. It has special DIP switches that help you quickly set the necessary parameters in the setup and program bus protocols.

To carry out software updates, the basic key fob of the complex has a mini USB port. It is also used to read history extensions and set configuration parameters. Car alarm Pandora DXL 3210- a model optimized for speed of installation and remote engine start function. It has three built-in A20 relays.

The main alarm unit has a built-in CAN bus adapter. Its task is to maintain exchange protocols with electronic tires of various cars of famous brands. Another advantage of the system is a perfect authorization dialogue and a 128-bit personal encryption key. However, this is a feature of the entire line of Pandora double-sided complexes.

The Pandora DXL 3210 car alarm automatically finds a free communication channel; for this it has a multi-channel radio path. There is a function for determining the status of twelve independent security zones and an additional indicator. The commands are also supported by an additional key fob with three buttons. To complete the kit, there is also a motion, tilt and shock sensor made on a 3-axis accelerometer.

Attention: update!

In March 2014, an updated line of Pandora DXL 3210, 3500 and 3700 systems appeared on the website, which can be purchased without leaving your home. The update affected the key fob with a liquid crystal display. Its design remains the same, but the circuitry has become new, ensuring even higher reliability of operation. The key fob also received an improved radio path and a new AES128 encryption algorithm, which now has a narrower bandwidth and an improved frequency grid of working channels. The kit also includes another keychain - R304.

Pandora DXL 3210 security systems also received other updates, which affected their price. In particular, among the new products is the RFM390 RF module. It is compact, has a flat cable and provides higher communication reliability.

The transformations had a positive effect on the stability of the car alarm and on the range of the radio channel, which is very useful in large populated areas where many wireless networks operate and the power transmitted over the air is reduced.

New lines of car alarms are designated by the index “I”. They differ in the software version indicated on a sticker pasted on the back of the main unit, the instruction manual and on the box.

Pandora DXL 3210 is a security and service system with direct connection to the digital CAN bus of modern cars. The system is equipped with special DIP switches for quick programming of parameters and selection of vehicle digital bus protocols.

The base unit of the system has a built-in mini-USB port for updating software, programming settings and reading an extended event history.

The model is optimized for rapid installation in car dealerships without the possibility of automatic and remote engine starting.

Has 3 built-in 20A relays.

The universal CAN bus adapter built into the base unit supports digital bus exchange protocols for most models of common car brands.

Innovative multi-channel radio path with an optimized broadcast network that automatically selects a free communication channel. Indication of the status of 12 independent security zones, including an additional sensor. Additional 3-button dialog key fob that supports all control commands.

Has a built-in intelligent two-level shock/tilt/motion sensor based on a three-axis accelerometer

Equipment

Control unit (main unit)

The base unit contains an integrated multi-system highly efficient CAN interface that allows you to process information from high-speed digital vehicle buses in streaming mode.

Powerful 32-bit ARM controller.

Digital high-precision 12-bit accelerometer.

DIP switches for quick selection of vehicle protocols and programming of basic system functions.

Mini-USB port for updating base unit software, changing programmable system settings, reading an extended event history.

Key fob with LCD, double-sided

Small-sized ergonomic dual-processor key fob with LCD.

Includes 1 pager keychain.

The key fob has the highest information content - 80 independent LCD segments, 17 melodies, vibration alert, bright status LEDs. Enlarged service icons. The visibility of segments does not depend on the viewing angle. Separate indication of motion, shock, and additional sensors.

Supports the ability to remotely change the sensitivity settings of shock and motion sensors.

Optimized user menu system.

Sealed housing.

Revolutionary technology for hanging buttons.

Operating life from one AAA battery is up to 6 months.

Dimensions 76x35x16 mm.

Additional key fob without LCD indicator

The additional key fob is double-sided, interactive, just like the main key fob.

The key fob is equipped with a lithium battery.

RF module (radio module)

Usually the module is mounted on the windshield of the car.

The module has a call (search) button for the LCD key fob.

Multichannel radio path.

Valet button and LED indicator, with wires

The status indicator (usually mounted under the windshield of a car) uses a matte three-color LED. The LED housing can be attached to another side of tape, but the installer can, if desired, disassemble this housing and mount the LED in the traditional way, “through a hole.” The Valet button uses a sealed microswitch in a new, smaller plastic housing that allows for hidden mounting of the button.

For ease of installation and operation, the wires are very soft, two-color, with “cambrides”.

Mounting kit

The kit includes the accessories necessary to simplify installation - screws, ties, limit switches, wires with connectors, ground terminators.

Plastic card with individual PIN code

: Out of production.

Pandora DXL 3210i is a car alarm with feedback that combines high functionality and comfortable use. The alarm is installed using a digital CAN interface. Quick programming of parameters and selection of digital bus protocols of the model is carried out using special DIP switches.

Maximum protection of the device is achieved through the use of a unique 128-bit data encryption algorithm, which prevents any type of electronic hacking and three built-in 20A relays.

Stable communication over long distances (up to 650 m) is ensured through the use of a multi-channel radio path, which uses an optimized broadcasting grid and automatic free channel selection mode.

The device is equipped with temperature, tilt and shock sensors. If there is any suspicious impact on the car, the sensors will immediately notify you.

To disable security, two PIN codes are used: master and service code. The service code is required to access the menu and put the system into maintenance mode. The master code (personal secret code) is stored on a special plastic card and is used to turn off the alarm in an emergency.

The base unit is equipped with a built-in mini-USB port, which is used to connect the device to a computer. Using the USB port, you can update the system software, configure and view a detailed history of events. All important points are stored in the DXL 3210 memory and, if necessary, can be viewed on a computer or key fob display.

Two key fobs are supplied with the device. The main key fob has a built-in display that displays all the necessary information and LED indicators that notify the owner of the current protection status. If additional key fobs are not needed, but control is necessary from the phone, then we recommend installing an alarm system. It is similar in name, but is a new generation system with completely different capabilities.

Unlike the main one, the auxiliary key fob does not have a display, and three buttons are used to transmit control commands.

Features of Pandora DXL 3210

32-bit microcontroller ARM32;
CAN – interface for connection;
FRAM memory for storing history and time constants;
three relays with programmable operating logic;
built-in mini-USB port for connecting to a computer;
DIP switches for fast and simplified programming;

Despite all the excellent characteristics, you can buy a Pandora DXL 3210 alarm system at a very affordable price.

Pandora DXL 3210i is an updated version that differs from the previous model in updated software and an improved RF module. Although this security system does not have the ability to install autostart, the DXL 3210i performs its main task - anti-theft protection of the car - at a high level.

High operational reliability

Security system Pandora DXL 3210i is capable of working with a car’s universal CAN bus, which makes it available for installation on most modern cars, including luxury cars. Note that the system operates with two buses and can independently select an available communication channel from 434 channels. This ensures high noise immunity, when even in the most difficult geo-points the security complex confidently responds to commands.

Pandora DXL 3210i uses a conversational data transfer method, which minimizes the possibility of intelligent hacking. Additionally, when transmitting a signal to the system, key fobs use a 128-bit key created using a crypto-resistant encryption algorithm. Completely eliminating intellectual hacking, the Pandora DXL 3210i system promptly warns the owner about physical impact on the car. In the event of evacuation, towing and other unauthorized events, the three-dimensional accelerometer will record the impact on the car, and the system will instantly send information about this to the owner’s key fob and phone.

High-quality car protection

Pandora DXL 3210i monitors twelve security zones independent from each other. All alarms are displayed on the key fob, and a whole list of types of events that occur with the car is recorded.

In addition to the main alarm signals about penetration into the car or its impact, the security system notifies about the side lights being turned on and the battery charge being low.

Increased protection is realized due to the presence of an immobilizer function in the system. Working in two modes, this function requires, after disarming, the submission of an additional signal to unlock the engine.

One of the capabilities of the security system is the presence of a maintenance mode. This mode disables all security functions and can be useful when transferring the car to a repair shop, since it completely eliminates reprogramming the system without the owner.

Convenient control of the security system

For ease of use, the Pandora DXL 3210i system is equipped with a dialog key fob with an LCD screen and 16 melodies for various events. The manufacturer has carefully thought out the ergonomics of the screen, making information reading very fast. On the key fob screen you can find out information about the temperature of the cabin, engine, battery charge level, and LEDs on the side increase the speed of information perception.

The additional keychain is not inferior in cryptographic strength to the main one and also pleases with its convenience. It is equipped with three buttons and a light indicator, and the battery reserve is enough for uninterrupted operation for three years.

The reliability inherent in Pandora brand products fully corresponds to the qualities of the Pandora DXL 3210i interactive alarm system. And the average cost of the model makes it accessible to a wide range of car enthusiasts.

Additional equipment for Pandora DXL 3210i

Price with installation:

Electromechanical hood lock is installed in standard places without damaging the car body.

Prosecurity Hood Lock

Price with installation:

Electromechanical gearbox lock blocks gear shifting directly in the engine compartment.

Prosecurity Gearlock

Price with installation:

Electromechanical hood lock. Protects the engine compartment of the car from intruders.

Hood lock Defen Time V1

Price with installation:

Electromechanical hood lock of improved design. Protects the engine compartment of the car.

Hood lock Defen Time V5

Price with installation:

Electromechanical hood lock of an improved design with a protected emergency opening cable.

Hood lock Defen Time V5 Plus

Price with installation:

The mule is designed to control the hood locks. Control is carried out via a digital bus using a coded signal.

Pandora HM-06 hood lock control module

Double-sided LCD key fob with 80 independent display segments, 17 melodies and a vibration alert.

LCD keychain Pandora D-074