Mercedes 

Approximate cost of working in a car service center. Low beam bulb in Priora. How to choose a light bulb and replace it yourself? Approximate cost of work in a car service What kind of light bulbs are in priority?

According to paragraph 178 of the Road Traffic Law, during daylight hours it is permitted to use so-called daytime running lights instead of low beams. Any car can be equipped with two of these headlights, provided that they are marked RL (corresponding to point 87 of the European certification). If a headlight uses a module with diode lamps, then such a headlight must be marked MD. The exception is those headlights where the diodes are built-in, i.e. they cannot be changed without replacing the entire headlight. When installing daytime running lights on a car, it is worth remembering that the luminous flux of such optics must be at least 400 cd and not exceed 1200 cd. When the driver switches to low or high beam, the daytime running lights should automatically turn off. I would like to especially emphasize that any home-made modifications to car optics (for example, installing diodes instead of halogen) can lead to a serious accident, since too bright or incorrectly adjusted light blinds drivers, and too weak does not properly illuminate the road. All permitted types of lighting devices are listed in paragraph 50 of the Road Traffic Law - “Technical requirements for a vehicle”.
Before the GTO, I changed the LEDs on the dimensions to standard ones. The guy said that he did the right thing, he didn’t give them a reason to cling to them. But they don’t pay attention to the backlighting of the license plates.
Did they prohibit it? They only asked questions about the color of the LEDs; they didn’t ask about installation.
they don’t prohibit....that means...think for yourself
You can use the seeds, but not blue, only white ones seem to be possible, but this is mockery, collective farm tuning Tags: What kind of bulbs are in the low beam headlights on a Priora?

Replacing light bulbs in the headlight of a Lada PRIORA car.

What kind of bulbs are installed in the low beam of Lada Priora | Topic author: Irina

Can you tell me what the name of the bulbs in the low beam of the Lada Priora is? And one more question, what can be made from white light? Just don’t offer lenses with xenon and so on.

Polina  N7

Tatyana are called halogen. white halogen bulbs ala xenon, Philips has these

Arthur  There is one lamp in the headlight, it is both low and high. And the white one brought it together
BOSCH Xenon Silver. At the market you'll ask for a bunch of options to choose from.

Galina  Install stock ones, well, a little more powerful is possible if you don’t want to change the generator often.

replacing a low beam lamp on a Lada Priora - YouTube

Replacing the low beam lamp on a Lada Priora. ... Replacing the light bulb in the fog light of LADA PRIORA - Duration: 2:13. Dima neoN...

The catalog of the Netuning website presents high-quality LED lamps for the domestic car Lada Priora. LED devices have significant advantages - they consume a minimum of energy, while creating bright and even light. In addition, the lamps are durable - in conditions of active use, their average service life is 3-5 years.

Catalog

The following types of LED bulbs for Lada Priora are available on the website:

  • reversing lights (from 2 to 8 W);
  • interior lighting (from 0.5 to 3 W);
  • front and rear dimensions (from 0.5 to 7.4 W);
  • license plate illumination (from 0.5 to 2.8 W);
  • low beam headlights (from 16 to 55 W);
  • side turn signals (0.7 W);
  • front fog lights (from 4 to 55 W);
  • brake light (from 3.3 to 7.4 W);
  • rear and front turn signals (from 3 to 15 W);
  • trunk lighting (from 0.5 to 3 W).

LED devices have a standard base type, so the motorist will not have problems installing lamps in headlights. All products are covered by a factory warranty of at least one year.

You can place an order online or by calling the phone number indicated at the top of the site. If you have questions or don’t know which bulb is suitable for your car, consult our specialist. We will select an LED device that will ideally replace the standard lamp on your Lada.

This post will be devoted to such a simple repair as replacing the light bulbs in the headlights: low and high beam on a Priora with your own hands. There is nothing complicated in this work, but it is worth describing everything in more detail so that there are no questions.

It is worth noting that no tools are required to perform this procedure; everything is literally done with your own hands. So, below we will consider an overview on this topic.

Photo report on replacing the low and high beam lamps on a Priora

The bulbs can be accessed from the back of the headlight, of course, after first opening the hood of the car.

Now, if you need to replace the low beam lamp, carefully pry up and remove the smaller rubber protective cap. Everything is clearly shown in the photo.

It is under it that everything we need is located.

I think it’s clear that the lamp is attached to the reflector using a special metal clamp that needs to be snapped off.

Then you need to disconnect the power plug that is connected to the lamp. Although, it will be more convenient if you do this before releasing the bracket.

Now we fold the bracket all the way up so that it does not interfere with us during dismantling.

And now you can remove the low beam lamp from the headlight without any problems.

Please note that when installing a new light bulb, do not touch its bulb so as not to leave greasy marks. Otherwise, this threatens to quickly burn out the lamp.

As for the high beam, everything here is done by analogy, only it is located under a large hood.

As for replacing it, everything is even a little simpler here, since there is a plug with one power wire.

And the bracket is released even easier than in the first case.

Used lamps in the headlight on a Lada Priora car

  1. High beam - AKG12-55-2 (N1)
  2. Low beam - H7
  3. Turn signal А12-21-4 (PY21W)
  4. Side light - A12-5-2 (W5W)

If the above instructions were not entirely clear to someone, then everything will be shown below in even more detail.

Video review of replacing low and high beam lamps on a Priora

The review was made specifically for this material, and was inserted from my YouTube channel.

The price of lamps can vary greatly depending on the manufacturer and model, ranging from 100 rubles to 1000 rubles per piece.

If you have any questions or unclear points, you can discuss this topic in the comments below or on the channel!

Low beam lamps on a Priora car darken over time and even burn out, so they need to be replaced periodically. This operation itself does not present any difficulty. However, before you begin, you should decide which low-beam lamps are best installed on the Priora, and also familiarize yourself with the procedure for replacement, which we will do below.

Choice

First of all, let's look at which low beam lamps on the Priora are installed by the manufacturer. So, if you carefully examine the headlight unit of this car, you will notice that it is divided into several compartments. This indicates that the headlight uses bulbs with a single filament, i.e. separately for high beam and separately for low beam.

As for the base, it complies with the H7 standard. There is a wide range of such lamps on the market. Their main difference lies in the principle of operation. So, in addition to the halogen bulbs that are installed on the Priora as standard, you can also find xenon (gas-discharge) and LED bulbs.

It should be noted that the main parameters of lighting elements, including brightness and durability, depend on the operating principle.

Below is a comparison table with the main characteristics of different low beam bulbs:

At first glance, the choice is obvious, and it is not in favor of halogens.

But, you should not make hasty conclusions, since “xenon” and “LEDs”, in addition to their advantages, also have some disadvantages:

  • The price of lamps starts from 30 – 40 USD. The cost of halogen lights is on average 10 USD. for a couple. Domestic lamps are even cheaper;
  • The luminous flux of xenon and is characterized by poor penetrating ability, so driving with their light in wet weather (snow, rain or fog) is very difficult;

  • Installation of xenon and LED lamps requires the installation of ignition units, and also contains a number of other features. In particular, LED bulbs require the installation of a large reflector and a cooling system. Therefore, it will not be possible to do the installation yourself;
  • The lamp ignites gradually, so the low beam turns on with some delay.

Advice!
To avoid problems when driving in bad weather under the light of xenon or LED lamps, you should install fog lights with halogen lighting elements.

For these reasons, the low beam lamp for the Lada Priora is selected individually, depending on the financial capabilities of the car owner, the region and the weather in which the car is most often planned to be used. However, it should be noted that halogen lighting elements are still the most popular.

How to replace a light bulb

As mentioned above, xenon and LED bulbs must be installed by specialists. Therefore, below we will consider how to change the low beam lamp on a halogen Priora.

So, the work is done in this order:

  • First of all, you need to open the hood and disconnect one terminal from the battery;
  • Next, you need to remove the rubber casing from the back of the headlight, covering the low beam compartment, which is located closer to the car’s fender;
  • Then you need to disconnect from the contacts ;
  • After this, you need to unclench the ends of the latch with your hands and move them away from the hooks. Then the latch should be moved away from the base;

  • Now that the base is not fixed in anything, you can remove the socket from the headlamp, then remove the lamp from the socket;
  • Then a new lamp is inserted into the socket. This operation should be performed carefully, without touching the glass flask with your fingers. Grease stains remaining on the glass can lead to overheating of the lighting element and its premature failure;

  • Next, the structure is assembled in the reverse order - the socket with the lamp is inserted into the headlight unit and fixed with a spring, after which the block is connected to the contacts. Next you need to reinstall the rubber casing;
  • At the end of the work, you need to connect the terminal to the battery and check the operation of the low beam. In this case, the ignition must be turned off.

Note!
The battery terminal must not be disconnected while the engine is running, as this may damage the electronic equipment.

Here, in fact, are all the instructions for replacing a light bulb on a Lada Priora. The work is performed the same way on both the right and left sides.

Advice!
If replacing the low beam lamp on a Lada Priora did not give positive results, i.e. The light still doesn't come on, you need to check the fuses.
They are located in the instrument panel to the left of the steering column.

Conclusion

Replacing the low beam lamp on a Priora is quite quick and simple, due to convenient access to the rear side of the headlamp. However, in order to ensure a comfortable ride in the dark, it is necessary to choose a lighting element wisely, taking into account the above recommendations.

From the video in this article you can get additional useful information on this topic.

Many criticize the domestic auto industry, but VAZ cars also have their advantages. One of them is the low cost of maintenance. In addition, the owner of the Priora can replace the components with his own hands. Let's say the low or high beam lamp on your car stops working.

Having basic knowledge about electrical appliances, you can install new light bulbs yourself. Our task is to explain the installation process in as much detail as possible and suggest which light bulbs need to be installed on the Priora. Replacement can be carried out both in the garage and on the street. The only requirement is external lighting. When the replacement is completed, it is important to make adjustments to the optics.

We buy replacement light bulbs

The headlight unit contains four lamps: dimensions, turn signal, low beam and high beam. We are interested in the last two components:

  • Low beam is equipped with H7.
  • For “high beam” the lamp AKG12-55-2 (H1) is used.

The VAZ 2170 (as well as more modern models) uses halogen optics for high and low beam. Some motorists prefer to modernize the Priora by installing alternative headlights. We recommend following factory recommendations. A halogen lamp for low beam will cost you 250-500 rubles, for high beam - 100-400 rubles.

If you decide to change the standard “light” of the Priora to alternative optics, then you should pay attention to the products of Philips, Koito and Osram. On automobile forums, owners recommend using products from these manufacturers, as they have a long service life. When choosing light bulbs, you need to start from their types. For example, you want to buy a Koito component for low beam - find the H7 bulb in the list.

Replacement

Now you know which light bulbs are suitable for the Lada Priora car. Prepare clean gloves, a brush for cleaning optics, and a standard set of tools, which includes wrenches and screwdrivers. If you will be working with the left headlight, it is recommended to remove the battery in advance. Replacement can be done without this step, but it will be difficult for you to reach some of the light bulb mounts. Before you change the lights, you need to determine what type of headlights are installed in your car.

  • Option A shows headlights with high beams and DRLs. In this version they are combined and equipped with plugs.
  • On option B, the main beam does not have daytime running lights; there is one large plug.

Novice motorists may confuse the lamps with each other. To prevent this from happening, compare the light bulbs of your car with this image, H1 - high beam, near H7 - low beam:

The Priora uses halogen lamps. When installing new components, try not to touch the bulbs with your fingers. Upon contact, grease stains may remain, which will lead to darkening of the lamp glasses. Work must be carried out with clean cotton gloves. If you do touch the flask, immediately wipe the area with a clean rag. It is advisable that the cloth be soaked in alcohol.

Step-by-step instruction

  1. Work begins with removing the protective casing that covers the headlight housing;
  2. Next, you need to disconnect the wires from the lamp that are connected to one block;
  3. The components are held in place by a spring retainer. It needs to be removed. Carefully remove the ends of the clamp from the fasteners, now it can be moved to the side;
  4. Now we have access to the low and high beam lamp - carefully remove it. Don't forget to use gloves;
  5. Replace the correct lamp. Assembly is carried out in reverse order. Securely fix the rubber boot on the headlight unit.

Done, replacement will not take you more than 20 minutes. The photo shows the disassembly process on the left headlight with the battery removed. On the right headlight, work is carried out in exactly the same way. The step-by-step instructions are suitable not only for factory light bulbs, but also for alternative optics for Lada Priora. When the replacement is completed, you need to check how the new light works.