Car alarms. How to install a Pandora security system Operating instructions

Under the Pandora brand, interesting offers are regularly released for a wide audience of motorists. The company's developers manage to combine in their products such qualities as functionality, manufacturability, reliability and low cost. Of course, not every budget solution can incorporate the functionality of premium models, but it is quite possible to find a balance between optimization and support for the basic and most important tools of the security complex. In many ways, this principle is reflected in the Pandora DXL 3210 system, which embodies many modern capabilities and additional options.

General information about alarms

The complex has not yet reached the level of top-level telematics systems, but even at the initial level of technological development it looks out of place. The creators provided the complex with DIP switches with the ability to quickly program, which in itself puts the module at least in the middle segment. The user was given the opportunity not only to select digital bus protocols, but also to expanded tools for working with a computer via the mini-USB port. Direct interaction of the car owner with the system can be realized either through the radio communication channel of the key fob, or through a key with a radio tag. Based on signals from the same controls, the Pandora 3210 alarm system activates the start of the power unit and regulates the functions of the triggers. But telematics was also partially implemented in this system. At a minimum, the user can enter a smartphone into the control infrastructure using special applications. Anti-grabbers and radio interference countermeasures are responsible for the reliability of communications.

Features of the Pandora 3210 module

Despite the model belonging to a group with logical limitations in functionality, it has several technological features. First of all, the model is based on a new microcontroller of the ARM32 line, which ensures system speed and instant response to signals from sensors. Accordingly, the car owner’s devices receive alarm signals stably and quickly. One of the key characteristics of the complex is energy saving. The manufacturer has optimized energy processes using FRAM memory. It allows you to save time constants, as well as maintain a history of alarms. In order not to limit the owner of the Pandora 3210 in the communication expansion of the security complex, the central unit based on the system controller includes three 10A relays that can be programmed. If we talk about functionality, then it is typical for this kind of model. In addition to individual telematics capabilities and optional autostart, the user has access to basic locking tools, partial control of optics and regulation of microclimatic parameters in the cabin.

Installation instructions

The physical installation involves the base unit, the receiver in the form of an RF module and the sensors. It should be noted right away that detectors and sensor devices can be purchased separately and added to the complex as an option. It is recommended to start installation from the central unit, placing it in the niche of the dashboard. The kit includes plastic ties that can be used to secure the unit body, but power installation is carried out using hardware and metal profiles. Regarding the RF module, the Pandora 3210 instructions note that the optimal location is the windshield area - as high as possible, but without direct contact with metal surfaces. Sensors are placed depending on their functional purpose. The temperature sensor can be located in any convenient place, but so that during operation it is not affected by local climate control equipment. The shock sensor is accordingly installed near windows at points where there is no risk of exposure to moisture.

Instructions for basic settings

There are several levels of basic configuration available. At the first level, it is necessary to adjust the interaction between the immobilizer and the alarm system. In some car models, a device conflict may occur when starting the engine at a distance. Such situations can be prevented by installing a transponder with an integrated key connected to both the key fob and the immobilizer. This solution will allow you to bypass the starter blocking and activate the engine. Next, the parameters of automatic and passive arming are configured, and the signals from the siren are determined when the sensors are triggered. When the sensor sensitivity thresholds are exceeded, the Pandora 3210 key fob should also be notified, which, depending on the set parameters, will display a message about one or another alarm mode. Limit switches are configured separately for operation. They will monitor door locks, hoods, windows, etc. via analogue channels.

Instructions for working with the CAN interface

This interface is not supported by all car models, so you should find out about compatibility before purchasing an alarm kit. Setting up the CAN interface is carried out in two stages. At the first stage, the limit switches are polled via an organized CAN bus. You should test the interface access to the buses leading to the handbrake, doors, luggage compartment, brake pedal and tachometer. If a return signal is received from all of the listed mechanisms, then you can move on to the second stage. At this stage, the ability to control standard devices via the CAN interface is directly tested. To do this, “Pandora 3210” can also be connected to a computer - the main thing is to record the facts of the mechanism’s operation in the form of locking and unlocking. If an individual device does not work, it can be checked via the analogue control channel.

Implementation of autorun

It should be noted that the model does not officially support auto-start, but it can be implemented on the basis of an alarm as an option, since the automatic start programming table is still available in the central unit. In practice, the same temperature sensors and additional relays will help solve this problem, through which the signal will be sent from the key fob to the control unit, and then to the engine control system. The relay trigger module must be integrated into the Pandora 3210 security infrastructure. Automatic start will be possible by bypassing the immobilizer, for which, as already mentioned, it would not be amiss to provide a transponder in the form of an unlocker. As for the temperature sensor, it will be required to set specific heating modes in the cabin. The remaining option indicating time intervals is provided in the configurations of the software interaction between the key fob and the central unit.

Positive reviews

According to many users, the system fully meets the requirements for the modern level of vehicle security in terms of electrical reliability. There are also extensive possibilities for flexible configuration of individual modules for different control modes. In terms of ergonomics, this is one of the best systems, at least in the manufacturer’s range. The owners of the kit also speak positively about the physical reliability of the components. The Pandora 3210 base unit does not cause problems and functions stably, maintaining communication with all connected devices. The quality of radio signals is also emphasized. The equipment receives signals without interference, regardless of the channels through which communication is organized. Of course, this applies to areas where there are no obvious third-party influences on the quality of communication.

Negative reviews

Nevertheless, in terms of functionality, the model is actually stripped down, which became the main reason for criticism of the creators. At the same time, as additional support, some of the options can be quite organically introduced into the security infrastructure. There are also some complaints about the alarm system not working correctly when arming. For example, a common situation is when the starter functions, but the crankshaft does not respond. Moreover, in a mode free from signaling connection, both nodes operate normally. However, similar situations can arise without the influence of the Pandora 3210 system. Reviews from some owners indicate that mechanical conflicts may occur when individual anti-theft devices are integrated into a complex.

Conclusion

The model justifies itself as a standard solution in the form of an electronic system for providing security functions without an extended telematics complex. It can be said that the mere control of locks and interlocks via a key fob today cannot be considered at all as a full-fledged car alarm system, but the bottom line is that users get the same effect as the owners of premium systems. In addition, it is worth considering the modest cost of Pandora 3210 - the average price is 4-5 thousand rubles. For comparison: telematic alarms with a full-fledged autostart and navigation tools with GPS will cost at least 15 thousand. If you require the option of positioning the location and ample opportunities for interaction with on-board electronics, then you can turn to older models from Pandora.

In front of you alarm Pandora DXL 3210- a high-tech security system with the option of direct connection to the car’s CAN bus. It has special DIP switches that help you quickly set the necessary parameters in the setup and program bus protocols.

To carry out software updates, the basic key fob of the complex has a mini USB port. It is also used to read history extensions and set configuration parameters. Car alarm Pandora DXL 3210- a model optimized for speed of installation and remote engine start function. It has three built-in A20 relays.

The main alarm unit has a built-in CAN bus adapter. Its task is to maintain exchange protocols with electronic tires of various cars of famous brands. Another advantage of the system is a perfect authorization dialogue and a 128-bit personal encryption key. However, this is a feature of the entire line of Pandora double-sided complexes.

The Pandora DXL 3210 car alarm automatically finds a free communication channel; for this it has a multi-channel radio path. There is a function for determining the status of twelve independent security zones and an additional indicator. The commands are also supported by an additional key fob with three buttons. To complete the kit, there is also a motion, tilt and shock sensor made on a 3-axis accelerometer.

Attention: update!

In March 2014, an updated line of Pandora DXL 3210, 3500 and 3700 systems appeared on the website, which can be purchased without leaving your home. The update affected the key fob with a liquid crystal display. Its design remains the same, but the circuitry has become new, ensuring even higher reliability of operation. The key fob also received an improved radio path and a new AES128 encryption algorithm, which now has a narrower bandwidth and an improved frequency grid of working channels. The kit also includes another keychain - R304.

Pandora DXL 3210 security systems also received other updates, which affected their price. In particular, among the new products is the RFM390 RF module. It is compact, has a flat cable and provides higher communication reliability.

The transformations had a positive effect on the stability of the car alarm and on the range of the radio channel, which is very useful in large populated areas where many wireless networks operate and the power transmitted over the air is reduced.

New lines of car alarms are designated by the index “I”. They differ in the software version indicated on a sticker pasted on the back of the main unit, the instruction manual and on the box.

Car alarm Pandora 3210, instructions for self-installation. Pandora DXL 3210 is a fairly popular device today that will provide security for your car. Many consumers chose it and are really pleased with the result. During operation, it proved its reliability. The alarm system is highly sensitive; its key fob beacon recognizes a car over a long distance of several tens of meters. The car alarm has a built-in DIP switch, which provides more precise programming of the required parameters. In order to be able to program via a computer, view the latest events, and more carefully control the situation, the special alarm unit is equipped with a USB port.

Pandora alarm packaging

It is noteworthy that the Pandora car alarm radio path is programmed in such a way that it independently selects a more suitable wave over which information is transmitted.

Alarm equipment

Contents of delivery

The car alarm package includes such mandatory parts as:

Control unit (basic)
Valet button
Led indicator
Special wiring
PIN - a card containing an individual code
Installation kit.

Installation of alarm system Pandora DXL 3210

Preparing to install an alarm

Disassembling the instrument panel

Important!!! Before you begin installation, it is important to check that all power circuits have fuses.

You should definitely fix this problem, otherwise you can only do harm. It's no secret that each installed element must maintain its integrity, therefore, to install them, it is necessary to identify places where they would not be at risk of any kind of damage. It is also worth protecting from moisture, otherwise performance may decrease significantly, or they may fail altogether.

Installation of the control unit

Base unit, general view

The installation of the alarm system must begin with the installation of the control unit. It is necessary to remove the instrument panel and mount the base unit on the rear wall of the engine compartment. It should be taken into account that the mounting of the unit must be as reliable as possible, therefore all alarm elements need to be fixed.

The control unit must be difficult to access, so it must be secured in a hidden place.

Installing the RF module

RF module, general view

The Pandora 3210 alarm, the instructions for which are quite simple, has a number of important points. The alarm is also equipped with a transceiver module. The module must be installed on the windshield of the car.

It is important that it is not exposed to direct sunlight, and that there are no metal objects nearby.

It is problematic if the glass has a metallized coating, because this reduces the scale of the signal many times, so it may not be sent over a long distance.

Installing the LED indicator and Valet button

LED indicator and Valet button

The LED indicator must be attached in a visible place. Ideally - on the dashboard.

The service button needs to be hidden in a secluded place. It is with its help that you will later need to dial a special unique code in order to set up the alarm.

We lay the wiring

Next we install the wiring. According to the attached diagram, you need to connect all sensors and alarm devices. Particular attention and caution must be exercised when pulling wires; they may fray during operation. To route the wire into the engine compartment, you need to use ready-made holes; there is no need to make them yourself. In order for the wires to be safe and not interfere with any manipulations, they need to be hidden in a bundle.

IMPORTANT!!! Wires must not come into contact with hot elements!

Setting up Pandora 3210 alarm system via computer

Connecting to the computer

Connecting to a computer

The package includes a mini USB cable. We need it to connect the security system to the computer. You need to connect the base unit and the PC using a cord.

Note!!! Connecting the base unit does not require connecting external power to the system.

Entering PIN code

Plastic card with individual PIN code

We enter the pandora 3210 Loader program. Enter the PIN code. You already have it on your plastic card, and it is installed by default. If the first digit of your PIN code is 3, then press the Valet button three times. We do this quickly, pausing for one second. If the pause is too long, the system will move you to the next digit. When the system accepts the PIN code number, the indicator will light up with a red flash. And so all the numbers are in order.

If the system has accepted the encryption and it is correct, the red and green colors will light up alternately. After this, programming will begin. When the system starts, the installed firmware version for this model will appear in the upper right corner. The firmware version may be outdated and may need to be updated.

How to update firmware

Site interface

The latest version of the program can be downloaded from the website www.alarmtrade.ru, on the display you need to select the “download” option, then “firmware download”. The system will download the pld extension file, and you also need to select it in Pandora 3210 Loader. Now we press the “download” button, and the system updates automatically.

After installation, you can close the information window. Leave the main window open for now. To exit the software installation mode, unplug the USB cable for a second and plug it back in.

If the latest firmware version was initially installed, then, of course, there is no need to update it. Just connect the unit according to the instructions, enter the PIN code and configure the system.

Attention! Do not disconnect the unit from the computer so as not to interrupt the program update.

System Setup

General programmable settings

In order to configure the system, open the table of commands and statuses. It is included in the kit. We look at the car code that is supported by the CAN system. Here you can find information on the functions of this interface. We enter the fourth “settings” table and select the make and model of the car, as well as the CAN digital system. To save, click “Save”. If the required code is not in the table, then enter it manually.

Settings

To configure the parameters you need to select the following items:

System management
Arming mode
Arming mode
Re-staging.

You can also configure other settings. The main thing is to save everything in a file and give it a title. The file will be saved in the root folder. It can be copied and moved.

Pandora dxl 3210, equipment and setup

The Pandora 3210 alarm system belongs to the middle price segment of the market, but it has functionality that will reliably protect the car. The presence of feedback makes it possible to control the condition of the car from a distance.

[Hide]

System Description

The Pandora DXL 3120i Slave or Can anti-theft complex cannot be called a full-fledged telematics system. But even in the standard configuration, the consumer has all the tools necessary to monitor the condition of the car. The user can use digital bus protocols, as well as advanced functionality for working with a PC. The connection is made via a mini-USB output. For interaction between the car owner and the complex, radio frequency communication channels can be used, as well as a key with a radio tag installed inside.

Specifications

Brief description of the technical properties of the Pandora 3210 model:

The use and launch of anti-theft systems is allowed in cars with an on-board power supply, the voltage in which is from 9 to 15 volts. The best option would be to install the alarm in a 12-volt on-board network. Use of this model on motorcycles is permitted, but not recommended.
Devices not installed as standard on the vehicle will consume no more than 40 mA of current when the protective mode is activated.
The temperature range at which the alarm performs all its functions without interruption will be from -40 to +85 degrees.
The electronic alarm control unit is equipped with a 32-bit microcontroller. The device belongs to the ARM32 line of devices.
The main microprocessor unit is equipped with three relays rated at 10 amperes. These components are characterized by ease of configuration and programming.
The microprocessor device is equipped with a memory unit characterized by non-volatility. It stores information about all alerts and events that occurred with the alarm in the absence of the driver.
Possibility of simplified and quick programming of standard functions through the use of special DIP switches. These elements are located on the back of the microprocessor device.
The alarm is equipped with a built-in USB output. Its presence provides the ability to configure and program options. By connecting to a computer, it is possible to update the signaling software. This need may arise as a result of updating or changing the list of CAN protocols.

The Pandora Alarm channel presented a detailed overview of the technical parameters and features of the model 3210 anti-theft system.

Equipment

The modern anti-theft installation Pandora 3210 includes the following devices and elements:

The electronic unit. Used to control the anti-theft complex, equipped with switches, connectors and outputs for connecting main equipment.
Service user manual. The documentation indicates all the features of installation and connection of elements, as well as their operation.
Plastic card. It contains a special code for emergency control of the alarm.
Three contact elements. They are used for grounding.
Limit switch cables, two pieces.
The switch itself. The package includes two devices, which allows them to be mounted on the hood and tailgate.
The service key with the inscription Jack is intended for effective use and service disabling of the alarm.
Led indicator. Designed to determine the alarm status.
A set of wires for connecting all signaling components. Intended for connecting devices, as well as relay outputs.
Two communicators. One of them is the main one and has a two-way communication option; it is equipped with a display with icons. The second one is not equipped with a screen and a feedback option; it is considered a spare, since its range is lower.
Two protective cases for each communicator.
RF module with wire for connection.

The siren is not included in the Pandora 3210 package; this device must be purchased separately.

Key Features

Features of the Pandora anti-theft system:

Availability of CAN interface. Provides simplified installation of the complex with the possibility of minimal intervention in the standard electronics and on-board network.
Full protection of the machine perimeter is ensured due to the presence of security zones.
The presence of shock, tilt and motion controllers. These devices record not only physical impacts on the car body, but also determine the jacking of the car. Sensors can warn the car owner about the possible evacuation of the car.
Turbo timer. Using this device will prevent accelerated wear of the car engine.
Availability of Slave mode. Its use provides the ability to control the anti-theft complex not only through the key fob, but also through other external devices. You can configure control of Pandora 3210 using a communicator from a standard anti-theft installation, a keyless entry device or a GSM module.
Option to open the tailgate.
Ability to control power windows. We are talking about electrical devices. With proper programming, you can set the power windows to close automatically when the protection mode is activated.
The ability to control the pre-start heating device by analogue.
Support connecting digital machine motor lock relay. This will ensure a complete stop of the power unit in the event of an unauthorized engine start.
Availability of power analog outputs.
Possibility of turning on the security option when the power unit is running. A convenient feature if the driver does not plan to stop for a long time.
Option to automatically activate the protection mode. If the driver turns off the alarm but does not open any doors, then after a certain time the security mode will be reactivated. The time interval can be configured by the user.
Possibility of silent activation and deactivation of protection mode.
Availability of a delay option when activating the protection mode.
Option to search for a car in the parking lot. A convenient option for drivers who often leave their cars in large parking lots near shopping centers. When the function is turned on, the car’s external optical equipment is activated, and the car’s headlights begin to blink.
Panic mode will provide temporary activation of optical devices and a siren when suspicious people appear near the car.

The main features of the communicators that are included in the Pandora 3210 kit:

The device was developed on the basis of the 2500 and Deluxe models of anti-theft systems.
The main feature of the communicator is that the developers began to use the end position of the keys to control the signaling.
The design of the device uses an improved hanging system. This ensures a tight seal as well as a smooth key click.
The device is supplied to the market in a protected and shock-resistant housing. This ensures the prevention of mechanical damage when using the signal.

Alexey Golovashchuk demonstrated the operation of the Pandora 3210 signaling comfort option installed on a Skoda Octavia car.

Advantages and disadvantages

Advantages of the Pandora 3210 car alarm:

High range of the system. We cannot say exactly about the actual parameters of the communicator’s range, since it depends on external factors. We are talking about the architectural features of the area, weather conditions, and interference. But even with serious interference, the transmission of impulses will be of high quality.
The presence of a CAN interface is one of the main advantages for use in modern machines.
Rich functionality. For such a price, the alarm has many useful functions and features.
The optimal ratio of cost and quality, this advantage is confirmed by many consumers.

In accordance with the reviews, the following disadvantages should be highlighted:

Too few power signal outputs.
Rapid discharge of the power supply in the communicator. With intensive use, the anti-theft system key fob will discharge much faster. The consumer is recommended to carry a spare battery with him so that in the event of a complete discharge he can control the alarm.
Despite the manufacturer's statements that the alarm is equipped with a durable communicator, in fact this is not entirely true. Users note that the device is fragile; after several falls, the glass may crack. But if necessary, the user can order a new display from China; these elements are available for sale.

The Autoelectro channel presented a brief overview of the Pandora 3210 alarm system installed on a Nissan Beetle.

How to install?

In order to correctly install and connect system elements, the following requirements must be taken into account:

The electronic control module, antenna adapter, and additional controllers are installed only inside the car. Placing these devices under the hood or under the bottom of the car will lead to their rapid failure.
Each component of the anti-theft complex must be securely fixed in the seat. This is due to the fact that as a result of accelerations and vibrations, sensors and devices quickly fail.
Installation of the anti-theft system is carried out with the alarm plugs disconnected. In some cases, the battery may need to be disconnected. But this should not be done if the car is equipped with airbags or a car radio with a code. Before disconnecting the battery, it is recommended to read the service documentation for the machine.
Installation of CAN bus cables is carried out with the electronic module disconnected.
Installation of other devices that are not included in the standard package is carried out in accordance with the manufacturer's recommendations. For example, the installation of a siren must be carried out in the engine compartment, the horn of the device rotates downwards. This will prevent moisture from accumulating inside. When installing, you must choose a place protected from high temperatures and moisture.
Laying electrical signal circuits is allowed by twisting and soldering using lead solder with tin. If soldering is used, the switching point must be insulated using special tape or heat shrink tubing.
When connecting power lines to each other, you need to pay attention to the cross-section of the cables, as well as the materials from which they are made. It is important that electrochemical potentials are kept to a minimum and an intermediate conductor can be used for this purpose. The element can be a small piece of cable or a washer made of a material with an intermediate potential. After connection, make sure that the insulating layer does not allow moisture to pass into the contact area of the electrical circuits. Its presence will lead to rapid destruction of cables, in particular, we are talking about power lines with a large flow of current.
It is recommended to raise all connections as high as possible in the channels where they are laid. This will prevent the negative effects of condensation of water vapor that falls on the cables. Eliminates the possibility of corrosion.
When connecting cables, you need to leave a small margin in length so that the power lines sag a little. This will prevent damage to the joints due to vibration while driving.
When installing, it is prohibited to lay electrical lines in places where damage or destruction of the insulating layer may occur as a result of friction.
Wires from the siren and other components installed under the hood are routed into the body through a special technological hole in the partition. When laying, it is necessary to take into account the need to protect the insulating layer, as well as restore the anti-corrosion coating. It is recommended to use special rubberized or plastic bushings. Alternatively, you can lay cables in special holes for standard power lines.
All electronic devices should be placed as high as possible, and the unit connectors should be directed downward. This will prevent condensation from flowing into the circuit through the wires.
The electronic car alarm module is equipped with a built-in shock sensor. Therefore, when installing and fixing it, it is necessary to ensure high-quality fastening of the device to the body, which will allow the built-in sensor to work as accurately as possible. If the fastening is unreliable, this will lead to a decrease or increase in the sensitivity parameter.
When connecting all components, use the diagram included in the package. In this case, it is necessary to take into account the maximum switching currents, as well as the polarity of the contacts and signal outputs.
All leads of the anti-theft system that were not used during installation must be shortened and securely fixed. This should be done to prevent accidental contact with the car body and other electrical lines.

User manual

Correct operation of the Pandora 3210 alarm system is possible only after programming the control panel.

Designation of buttons and icons on the key fob

Designation of indicators on the key fob Designation of indicators on the key fob Purpose of key fob buttons Purpose of key fob buttons Purpose of key fob buttons

Setting up the key fob

Binding a communicator to control the alarm:

The programming procedure is performed with the ignition off. Find the Valet service key and click on it once. The siren speaker will play one sound pulse.
If you are pairing the main remote control with the screen, you must simultaneously click on three keys on the communicator. The buttons are held in this state until the pager emits one sound pulse. The siren will also play one signal, this indicates successful pairing of the device.
When binding an additional communicator, all three buttons on the device are also clicked. They are held until the diode indicator begins to blink.
When all communicators are registered in the memory of the microprocessor unit, the Valet service key is clicked again. After this, the electronic module will save the recording information in its memory, and the alarm will exit the binding mode.
The ignition is turned on and off by turning the key in the lock to the appropriate position.

Binding of each communicator must be completed in 20 seconds. If the interval between recordings is longer, the programming procedure will have to be started again.

The Satellite World channel talked about the procedure for adjusting the volume of the Pandora 3210 communicator.

Condition monitoring

The alarm status monitoring option is used to provide the car owner with information about the temperature of the engine, inside the cabin, etc. The data is transmitted from the electronic unit. To activate the function, you need to place the cursor on the pager screen in the position of the Check indicator; movement is performed using the key with the F symbol. After setting the cursor, click the button with the symbol in the form of a locked padlock, this will lead to sending a command to request the status. For ten seconds, the temperature in the cabin, under the hood of the car, will be displayed on the communicator screen. Information about the voltage in the car's electrical network will also appear.

To exit the status check mode, you need to click on the key with the F indicator. If you do not take any action, the anti-theft installation will automatically leave the binding mode after ten seconds. To go to the event history viewing menu, click on the button in the form of an open lock. Interior and engine temperature sensors are not included in the package, so to configure this function, additional devices must be installed.

Implementation of autorun

Pandora 3210 alarms do not officially support the ability to automatically start the engine. But this function can be implemented based on the anti-theft system as an option. You can configure the possibility of remote start using temperature controllers, as well as additional relays. Through them, an impulse is sent from the communicator to the microprocessor unit, and from there to the outputs of the motor control system. The relay device must be added to the anti-theft alarm infrastructure in advance.

You can enable and configure autostart only if you correctly bypass the engine blocker. Therefore, when installing a signaling system, the consumer must provide for the installation of a transponder in the form of an unlocker. Using a temperature controller will provide the ability to set certain heating modes in the car interior. All other functions with the definition of time intervals are provided in the settings of the program influence of the microprocessor module with a remote control.

The AvtoGSM channel spoke in detail about the features of implementing the remote start function in the Pandora 3210 alarm system.

Setting the sensitivity of the sensors

Adjusting the sensitivity parameter of the shock controller is done as follows:

Go to the programming menu. To do this, move the cursor on the screen using the F key to an indicator in the form of a hammer that hits the surface.
Once selected, click and hold the key with the open padlock symbol for three seconds. The selected indicator will blink, this indicates that the alarm level parameters of the controller have been configured.
Brief clicks on the locked key increase the sensitivity parameter. Each press increases the value by one step. Use the button with the open lock symbol to decrease the parameter value.
The warning zone is also configured. To switch programming modes, use the F button.
When the operating parameters are set, hold down the key in the form of a locked lock for one second. If the user does not take any action to configure within ten seconds, the alarm will automatically exit the menu.

The motion controller parameters are adjusted as follows:

Go to the settings menu. Use the F key to select the indicator in the form of an arrow pointing to the lower left corner.
The key with the symbol in the form of an open lock is pressed for three seconds, the previously selected indicator will begin to blink.
By briefly clicking on a button with a locked lock, the sensitivity parameters are increased. To decrease, use the open key.
To leave the setup mode, you need to hold down the button with the symbol in the form of a closed lock.

Download the installation and operating instructions for the Pandora 3210 alarm system in PDF format

The service manual, which will allow you to use and configure the alarm, can be downloaded from the link:

What is the price

Video “Instructions for using the key fob”

Sergey Maslov spoke in detail about the features of the operation and programming of the communicator for controlling the Pandora 3210 car alarm.

The Pandora 3210 car alarm is installed on cars via a CAN bus, which allows minimal interference with the standard wiring, providing reliable anti-theft functionality and ease of use. In addition to individual telematics capabilities and optional auto start, the user has access to basic locking tools, partial control of optics and regulation of microclimatic parameters in the cabin.

[Hide]

System Description

Car alarm Pandora 3210 is a continuation of the line of security systems with integrated controllers for installation on modern vehicles. This anti-theft system can be connected to more than 200 car models presented in Russia.

Specifications

Overview of the main properties of the “alarm” for the Pandora 3210 Slave and CAN models:

The system can be installed and connected to vehicles with 12-volt power supply. The alarm can operate on a power supply with a voltage of 9 to 15 volts, that is, minor surges are allowed. Installation of the complex on motorcycle equipment is not permitted.
The current consumption of the system devices is no more than 40 mA when the security mode is turned on.
The temperature range for alarm operation is from -40 to +85 degrees.
The microprocessor module of the anti-theft system is equipped with three relays, each rated at 10 A.
DIP switches are used for simplified setup and programming of options. These components are installed on the back of the control unit.
The system has a USB interface, which makes it possible to change the parameters of the complex using a computer. In addition, thanks to this output, the user can update the firmware of the microprocessor module.

The Pandora DXL 3210i in-vehicle system uses conversational signal coding to protect 11 independent security zones. The control unit is equipped with a 32-bit ARM microprocessor, which provides the ability to work with a digital interface.

Channel “Mr. Gray" briefly spoke about the technical parameters of Pandora 3210 car security systems.

Equipment

Scope of delivery of the 3210 anti-theft system for the car:

Security complex control unit. This device is equipped with all the necessary blocks and plugs for connecting the main alarm elements.
Service manual allowing you to install the system yourself.
Plastic card with an individual consumer password. This code can be used for emergency or service maintenance of the anti-theft system.
Three pins required to provide ground or ground.
Transceiver module with a wire for connecting to the on-board network.
Two limit switches for installation on the hood and tailgate. The elements are equipped with wires with terminals for connection. “Limit switches” for doors must be purchased separately.
Button to enter service mode.
LED for detecting alarm status.
Two pagers to control the anti-theft system. One is equipped with a display and is the main one, the second is additional, it does not have a screen.
A set of cables for connecting all elements of the security system.
Car alarm connection diagram.
Two protective cases for the main and additional pagers.
Package.

The Pandora 3210 alarm system does not include a siren, since alarm signals can be connected to the steering horn. The sound device can be purchased separately.

Key Features

Description of the main functions and features:

Using a CAN bus to connect a security system. Its use is only relevant on vehicles equipped with the appropriate interface.
A non-volatile memory function has been implemented, which stores information about the last 10 events. Thanks to the use of feedback, data on the operation of the system is displayed on the communicator screen with a detailed indication of the time and description of the event.
Car security around the entire perimeter. To ensure protection, the following are used: limit switches, blocking relays, shock, sensitivity and motion sensors. With the help of controllers, the alarm allows you to determine physical impacts on the body, as well as jacking of the vehicle. Thanks to this, you can find out about the evacuation of the car.
Availability of the “Turbo timer” option. Its essence is to ensure that the diesel engine operates at idle speed after the ignition is turned off. This helps prevent rapid wear of the structural components of the power unit.
Using the "Slave" function. With its help, the car owner can configure alarm control using external devices. For example, a key fob for a standard central lock, an electronic key.
Possibility of separate opening of doors and luggage compartment.
Availability of additional channels for controlling auxiliary equipment. This refers to electric windows, a system for folding side mirrors, and a power sunroof.
Using the pre-heater control function. With its help, the diesel engine is warmed up before starting.
Possibility of additional connection of a digital motor blocking relay. This will provide additional engine protection against unauthorized starting.
Using the security mode on a car with the power unit running. You can also configure automatic activation of protection if it is accidentally disabled. The system will be able to determine this by signals from the limit switches.
Delay in operation of interior lighting when arming. This function will allow the consumer to pick up all things from the car interior when the protection is turned on in the dark.
“Searching” for a vehicle in the parking lot. Based on a signal from the pager, the car's lights turn on, which allows you to determine its location in a large parking lot.
Panic mode. When it is turned on, the car's headlights are activated on command, as well as the alarm siren. This will scare away potential intruders from the car.
The key fob for alarm control uses a modernized proprietary suspension system. This helps ensure maximum tightness and smoothness when pressing the buttons on your device.

The Pandora Alarm channel briefly talked about the main capabilities and features of the Pandora 3210 security systems.

Advantages and disadvantages

Pros of alarm 3210:

High actual range of the key fob. The parameter declared by the manufacturer is 1200 meters, but in practice it is about 600 m in city conditions. Despite the fact that it is affected by the architecture of the area, weather, interference, and building density, the operating range of the device remains high.
Great functionality that allows for more simplified vehicle control.
Favorable price-quality ratio. At a relatively low cost, the alarm system provides effective car protection.

In their reviews, owners highlight the following disadvantages:

Rapid failure of the battery in the key fob. With intensive use, the battery discharges much faster and can completely run out in a few days. Especially in cases where the initial alarm setup is performed.
Low strength of the communicator compared to the data declared by the manufacturer. The case itself is quite reliable, but if the key fob falls, the display is often damaged. To fix the problem, you will have to either change the device itself or the glass. Finding this element on the secondary market is problematic, but it can be ordered from China.

Installation instructions

According to the installation instructions, before installation, the user is recommended to:

Turn off the ignition and electrical equipment of the vehicle.
Open one or more windows. When connected, the contacts may close, which will lead to the closing of door locks or other “glitches” in operation. A lowered window will allow the user to enter the cabin and take action to solve the problem.
Assemble all the devices included in the delivery set into one circuit using the diagram. This will make it possible to verify that the alarm is working.
Disconnect the battery (rechargeable battery) from the power supply. You will need to disconnect the cable marked “-” from the terminal clamp on the device in the engine compartment.

Connection diagram

Connection map of the Pandora car anti-theft system:

1 part of the module wiring diagram Part 2 of the connection map 3rd part of the control unit connections Part 4 connecting connectors

Installation of the control unit

Features of installation of the control unit:

The device is placed inside the car. The location is usually near the instrument cluster to prevent the need for extended wiring for connections.
During installation, it is recommended to rotate the unit so that its connector is directed downwards. Thanks to this, moisture will not get inside the device, onto the circuit board.
Self-tapping screws are used to secure the module in place; they are included in the package. It is possible to use polymer-based double-sided tape and plastic clamps. It is advisable not to secure the device with adhesive tape, since at high temperatures it will peel off and the unit will become detached.
The Pandora 3210 microprocessor is equipped with a digital three-coordinate acceleration controller, which is used to recognize any physical influences. The sensor records body movements and tilts, so the device cannot be placed near the heater air ducts. This may lead to false positives.

Installing the RF module

The nuances of placing a transceiver with an antenna adapter:

Installation is carried out on the glazing of the car, you can choose the front or rear window. The device must be positioned higher and horizontally, parallel to the ceiling trim.
Do not install the transceiver in a place where a thick tint film is applied. This will lead to a deterioration in the quality of the signals and reduce the range of the key fob to a minimum. For the same reason, the transceiver module must not be placed closer than 5 cm next to metal devices or the body. There should be no built-in windshield or rear window heaters at the installation site.
When laying the cable, sharp bends of the conductor and damage to the insulating layer must not be allowed. It must be laid under the plastic upholstery, which is dismantled in advance, to the control unit.

Installing the Valet indicator and button

Features of installing the indicator and:

It is recommended to place the three-color light bulb in a place most convenient for observation from the outside and from the driver’s seat.
The LED element is supplied in a plastic case. If necessary, it can be disassembled and the light source can be used separately by embedding it into the dashboard or dashboard. In this case, you will have to drill a hole with a diameter of at least 5 mm in the console. For better fastening, additional glue is used.
The “Valet” key is installed most secretly, since it can be used to enter a secret password to disable the security. But the consumer must have access to the button, as it allows many functions to be changed. When using this element and pressing it, the car owner should see the operation of the LED.

Wiring installation

Cable laying features:

Electrical circuits must pass from devices installed in the cabin to the control unit. The conductors must be laid under the interior trim.
Do not place cables in places where moving mechanisms operate: door hinges, pedals, parking brake lever.
For additional protection against wear and tear, the conductors can be wrapped with electrical tape. It would be better if it was a standard color; this will also allow you to disguise the cables. It can be black, blue, brown, it all depends on the car.

User manual

After installation, you must ensure that all components are connected correctly. To do this, you need to activate and then disable the alarm mode. It should work without binding a communicator. When activated, the door locks will close and the siren will emit several signals.

Setting up the key fob

Pagers for control must be equipped with working batteries. To install the power supply, the rear compartment of the remote control, hidden behind a protective cover, opens.

Designation of buttons and icons on the key fob

Description of keys and indicators on the pager screen:

Pandora 3210 display controls and symbols

Images on the main communicator:

Disabled security mode icon. In the first case, the lock is open, in the second, it is locked.
The “Send” indicator lights up green when commands are sent.
The symbol of the armed mode (begins to blink when an alarm is activated).
Car service icon.
Transceiver and communicator activity indicator. A double signal indicates a response has been received from the control unit, a single signal means the command has been sent, waiting for a response from the module. If there are no pulses, the alarm tries to send a message from the microprocessor to the key fob.
Automatic arming icon.
Indication of battery charge in the key fob.
Symbol for door, hood or trunk sensor activation.
Sensitivity controller activation icon. May indicate that the warning or main zone of the device is turned on. If the symbol is crossed out, then the regulator or one of its levels is deactivated.
Shock sensor zone activation indicator. The photo shows a crossed out icon, which indicates that the regulator is disabled.
Motion detection controller. If the symbol begins to blink, this indicates that a tilt or movement of the vehicle has been detected.
Icon for monitoring communication with the microprocessor module. The indicator always lights up when it is present.
Symbol of operation of additional timer channels.
Anti-robbery mode icon.
The anti-theft system service option has been launched.
Board with the current time. Information about the temperature status of the power unit, interior, and voltage in the on-board network is displayed here.
An alarm clock is included to allow you to start the engine at a specific time.
Communicator beep icon. If the symbol blinks, then they are turned off. Also, the indicator always lights up when the car is silently armed.
Siren or horn sound status icon. It may indicate that only warning pulses are operating, as well as their deactivation.
Running engine symbol. If it blinks, then the power unit is preparing to start; when it lights up continuously, this indicates the activation of one of the automatic start modes.
Ignition system on icon.
Sensor indicator on the brake pedal. It may indicate that the Neutral program is not working due to the handbrake being lowered. For this reason, autostart of the power unit is impossible.
Electrical voltage symbol. If it blinks, the car battery needs to be recharged or replaced.

Sergey Maslov spoke briefly about working with the Pandora alarm communicator in his video.

Key fob programming

Using all communicator options from the Pandora 3210 alarm system is possible only after linking the remote control to the system control unit.

To configure the key fob, perform the following steps:

The ignition in the car turns off. The button to enter the service mode is pressed. After the “click”, the anti-theft system will emit one sound signal with a siren or horn.
On the main communicator, three control buttons are pressed. They must be held in this state until the key fob plays a sound signal. The siren or steering horn should also sound. If a spare pager is programmed, the keys are held until the LED lamp begins to blink.
After binding the key fobs, the button to enter the service mode is pressed once. This will result in storing information about the remote controls in the memory of the microprocessor device. The anti-theft system will leave the binding menu, after which you need to turn the ignition on and off.

Autostart

Remote start of the car engine in model 3210 is not supported as standard, but this function can be configured optionally. To complete the task, the user must install a factory engine blocker bypass module in the car. This is done in order to avoid a conflict between immobilizers when starting the engine.

Function control features:

Button 1 on the pager is pressed and held for 3 seconds. The communicator must confirm receipt of the command by playing a triple melodic signal. A corresponding indicator will appear on the device screen. After a few seconds, the power unit will start and operate for a certain time, which can be adjusted by the driver.
To stop a motor started remotely, use the second key. This control must be pressed and held for at least two seconds. After the power unit stops, information about this will be displayed on the device display.
To autostart at a certain temperature, use button 3 to move the cursor on the key fob screen to the “Send” indicator position. At this sub-menu level, controls 1 and 2 allow you to activate or deactivate an option. The third key is used to go to the next menu - selecting degrees to start the motor. After determining the temperature, the first button is pressed.

Condition monitoring

Algorithm for checking the state of the anti-theft complex:

The cursor on the pager screen is moved to the position of the “Check” icon by pressing the third key.
After selecting the indicator, control element 1 is clicked, the remote control sends a signal to the transceiver about the need for diagnostics.
Over the next 10 seconds, the communicator screen displays information about the temperature inside the cabin and the engine unit, as well as the voltage in the car's electrical network.
To exit the status check menu, use button 3, or this happens automatically after 10 s.

The GARAGE36 channel briefly talked about the implementation of the engine auto-start function on a car with a Pandora 3210 alarm system installed.

Programming

Features of setting the key fob operation modes:

A short press on the first button activates the security system, provided that the ignition is turned on. The protection begins to function with sound. If the key in the lock is in the “Off” position, then “clicking” the key will lock the doors. When armed, using this control will activate the Search option.
Pressing button 1 for one second will enable the security mode without accompanying sound signals.
A short “click” on the second key will help open the door locks or disable the engine lock and disarm the car.
A quick click on control 3 will turn on the display backlight function. Pressing this button for one second will open the tailgate. If the “click” on the key is long and lasts more than three seconds, then the communicator can be turned off or on.
Activation of the security mode on a car with the power unit running is done by simultaneously pressing controls 1 and 3.

Setting the sensitivity of the sensors

To change the operating parameters of the controllers, perform the following actions:

Enters the setup menu. Using button 3 on the pager display, you need to move the cursor to the position of the icon in the form of a hammer hitting the surface.
After the indicator indicates, press and hold the first key for three seconds. The symbol on the screen will begin to flash, which means that the alarm has entered the controller’s alarm zone programming menu.
Using the first button, the sensitivity level of the controller is increased, and the second button is used to decrease the parameter. Each press increases or decreases the value by one unit.
To go to the warning zone setup menu, click the third key. Actions to increase and decrease sensitivity are performed using buttons 1 and 2.
After setting up the controller, press the first pager key for 1 second. The system will exit the programming menu.
To change the sensitivity level of the motion sensor, you do not need to exit the settings. Using the third key, the indicator moves to the position of the arrow icon.
Button 1 is pressed and held for three seconds. The symbol on the communicator display begins to flicker. Using controls 1 and 2, the sensitivity of the controller is changed.
After assigning the parameters, hold down the second key.

Factory reset

To reset all parameters, perform the following steps:

The car security mode is disabled. The ignition must be deactivated.
The service password is entered. Initially, the alarm is assigned code 1111. The user must press the key to enter the emergency service mode once. If a different password was assigned, then the number of “clicks” on the button must correspond to the first digit.
After the indicator blinks red, the next character is entered. The LED will blink to confirm.
The remaining characters are indicated in the same way.
Then the user must enter level 16 alarm setting. To do this, the service button is pressed 16 times. After the audio confirmation of entry sounds, she “clicks” two more times to go to the second level.
The first key of the key fob is pressed, the ignition is activated and turned off. The anti-theft system will reset all previously configured parameters to factory values. This may change the operating logic of the outputs, as well as the digital interface.

Download instructions and diagram in pdf format

You can download technical documentation for installing and programming Pandora 3210, as well as electrical circuits for connecting the security system using the following links:

What is the price

You can buy the Pandora 3210 alarm system at the following prices:

Video

The AvtoGSM channel presented a detailed overview of the functionality of the Pandora 3210 alarm system, and also showed the process of implementing the autostart option.