Useful tips 

Instructions for using the starline alarm key fob. Alarm Starline, operating instructions. Temporarily disabling sensors

The starline manufacturer has proven itself well in the domestic car alarm market and is very popular among car owners. The article will describe in detail how to set up a starline alarm, how to separately set up a key fob and other nuances regarding debugging the operating modes of alarms from the manufacturer Starline.

Types of key fobs and their characteristics

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline!

Depending on the model, you can set up the starline alarm using a key fob; key fobs differ in:

  • operating range of the key fob;
  • signal frequency;
  • key fob power type.

On earlier models, as well as cheaper and non-feedback alarm models, the operating range of a conventional key fob is approximately 500-700 m, depending on conditions. The auxiliary key fob allows you to use the key fob at a distance of 15-20m.


The situation is completely different with modern ones; they are capable of maintaining a signal at a distance of 1-2 km from the car, depending on conditions; in addition, the functions of the feedback key fob are quite extensive and allow fine-tuning the alarm to the requirements of the car owner.

If for some reason the main key fob does not work or has been lost, then you should use an additional or auxiliary key fob, the main thing is not to forget to purchase and set up a new key fob in a timely manner.

The signal frequency of all key fobs is 420-440 MHz.
The batteries on regular key fobs are a flat battery (3V), on key fobs with feedback - 1.5V (AAA).

Alarm operating modes

Most alarm models in the mid-price segment of this manufacturer have a variety of sensors and operating modes that form a large multifunctional vehicle security complex. This complex includes programmed modes:

  1. Advanced immobilizer mode.
  2. Regular self-diagnosis of the entire alarm system.
  3. Monitoring sensors, setting them up (using a key fob or computer).
  4. Silent security mode (this mode can operate both when the engine is running and when it is turned off).
  5. Monitoring vehicle location via GPS.
  6. Service modes for setting up alarm systems and flashing key fobs by the user.

Operating modes, setting up sensors using a key fob

Setting up the Starline key fob will not cause you any big problems if you study the instructions in detail and follow them. In modern key fobs with feedback, the alarm is controlled using three buttons located on the key fob. The symbols on the key fob will indicate that certain alarm modes are enabled.

Functions of the buttons on the key fob

Button #1

When pressed once, the standard security mode is activated, when pressed again (after about 5 seconds), the security mode is activated without sound notification.

If you press button No. 1 twice, the shock sensor control mode is activated.

If the car's ignition is turned on (when the engine is warming up, etc.), pressing the button once allows you to close the car doors.

Button #2

When pressed once, the standard security mode is turned off, but if you press the button a second time (after about 5 seconds), the security system is disarmed without a sound signal.

If the car’s ignition is in the “on” mode, then pressing button No. 2 once will open the door locks in the car.

If the alarm mode suddenly goes off, but the car is not in danger, then one press of the button will remove the car from the alarm mode.

Button #3

Single click = enable “control” mode. In this mode, all sensors and systems are checked in forced mode.

Long-pressing button No. 3 enables a certain mode that was programmed in advance, for example, starting the car using a timer at a certain moment or entering the “Starline alarm setting” mode.

Setting the volume mode

To configure the operation of sensors, you must have access to . Settings are made using the main key fob with feedback (with LCD screen).

With the ignition off, press the service button 5 times and then turn on the ignition. The car beep will sound (5 times) and the indication signal on the key fob will sound.

Then you need to press button No. 2 on the key fob. The icons on the key fob (on the screen) will display the inscription SO UN indicating that the volume of the sound signal has been adjusted.

To enter the sound signal setting mode, you need to press and hold button No. 3 for a few seconds, then quickly click the button again. A number indicating the signal volume will light up on the screen. To increase the volume, press button No. 3 once. To reduce the volume, go through all the modes in a circle
(there are 9 of them in total), and stop at the desired signal volume. To exit the setup mode, just turn off the ignition. If the modes are not saved, then you need to completely reset the alarm and again configure all modes to suit your needs.

Setting up shock sensors

Attention! This method is suitable for the most common starline alarm models A63, A93, A64, A94, B64, B94, D64, D94, E60, E90, E61, E91.

  1. To disarm, to switch to the sound signal setting mode, you need to press and hold button No. 3 for a few seconds, then quickly click on the button again. There will be a sound indication and the setup mode will be entered.
  2. Using buttons No. 2 and No. 3 we adjust the sensitivity of the shock sensors. Button No. 2 - increase sensitivity, No. 3 - decrease sensitivity.
  3. To maintain the sensitivity of the shock sensors, you need to hold down button No. 3 for a few seconds, then quickly click the button again. The results are saved. If the results are not saved, then you need to reset the settings and configure all modes again.

If the Starline alarm system is selected as a security system for the car, the operating instructions must be thoroughly studied by the car owner. However, not everyone has the endurance to study such an extensive document. Our article was created specifically for this case and is a concentrate of information that is enough for the first acquaintance with the Starline electronic car watchman.

Starline alarm system with auto start - system capabilities

The first thing that is assessed when choosing a Starline alarm is its capabilities. The set of functions can be very diverse. It divides the entire car into 9 separate zones and sets its own protection methods for each.

Most modern models of this brand have:

  • blocking relay against unauthorized start;
  • push-button switches for doors, hoods and trunk;
  • body elements and glass have shock sensors (two-level);
  • ignition switch control;
  • parking brake release lock.

Starline alarm keychain, video:

Starline necessarily contains information about the security of the system itself from hacking, since there will always be people who want to neutralize it. In particular, the developer proposed the following precautions:

  • protection of the signal from interception by dynamic code;
  • alarm with a limited number of cycles;
  • interrupting an alarm without disabling the security state;
  • saving system settings when the power is turned off;
  • Individual access code for emergency shutdown.

The Starline alarm system, according to the operating instructions, can notify the car owner in various ways and protect your car. The capabilities of the system are traditional, and they are as follows:

  • sound and light warning;
  • transmitting a signal to a key fob with feedback;
  • programmable engine blocking settings;
  • safe locking “anti-robbery” (imitation of a motor malfunction);
  • panic mode.

A distinctive feature of Starline car security systems is its extensive self-diagnosis capabilities. The starline alarm monitors the status of sensors and modes. In case of damage to elements, the car owner receives a notification about this on the key fob or LED indicator of the unit.

Instructions for the Starline alarm system - control principles

No less exciting for car enthusiasts is the issue of mastering the Starline alarm control system. Usually there is a remote control for this, or rather three types of remote control:

  • push-button without feedback;
  • push-button with feedback;
  • push-button with feedback and display.

The number of buttons for all Starline modifications is three.

Download instructions for the Starline A91 - A93 alarm system:

Functions are controlled by pressing each button individually, as well as using a combination of alternately pressing two buttons in different sequences.

The main functions of the remote control buttons are as follows:

  • No. 1 – turning on/off security with the engine running and not running, locking the locks, controlling shock sensors, starting and stopping the engine;
  • No. 2 – disabling security, unlocking locks, interrupting the alarm signal, turning off the immobilizer, programming silent arming/disarming of security and others;
  • No. 3 – launching the “search” mode, monitoring the condition of the vehicle.

For such a variety of functions, single and double clicks are used.

Alarm Starline A94, video:

For the Starline alarm with auto start, the instructions contain a more detailed explanation of how to control other functions when using different combinations of buttons. To master this material, you will have to spend extra time to avoid confusion and embarrassment when you cannot get inside your car.

It would be useful for a car enthusiast to know that the Starline alarm system has a detailed explanation of the system’s response to the submission of certain commands in the instructions. By pressing a button or a combination of them, the security system necessarily reacts in a certain way (sound or light signal, blinking side lights, etc.). This sign confirms that the driver’s command has been completed. Lack of response may indicate a problem with the system or incorrect use of control button combinations.

In fact, there is nothing complicated in managing the Starline system. Carefully study the manual and that’s it – you are in charge of the safety of your car.

Today, the automotive market offers a wide selection of security systems for cars. The Starline alarm system with auto start has become widespread among motorists. The article is devoted to this alarm: features and functions are discussed, installation and configuration instructions are given.

Starline car alarm with auto start

[Hide]

Peculiarities

The main feature of the Starline alarm system is the interactive encryption method, which is protected from reading by burglar equipment. All models, designed for use in urban environments, have a long range: in receiving mode it reaches up to 1.5 thousand km. To increase the resistance of signaling to radio interference, there are systems that have either special channels for radio interference, or channels for receiving and transmitting signals.

A feature that distinguishes Starline security systems is the possibility of self-diagnosis.

The car alarm monitors the state of the sensors and modes. If one of the system elements is damaged, the owner receives a corresponding message on the key fob or is reflected on the unit’s LED indicator. The instructions for using the Starline car alarm must contain information about the protection that the developers have provided for the system, since there will always be people who want to hack the alarm.

The following measures have been taken to protect against hacking:

  • the signal cannot be intercepted using dynamic code;
  • the alarm can be interrupted without disarming the vehicle;
  • the alarm signal has a limited number of cycles;
  • it is possible to save settings in case the power supply is turned off;
  • If an emergency shutdown is necessary, the alarm system has an individual access code.

Starline alarm key fobs are shock-resistant, ergonomically shaped and equipped with a unique interface in Russian. Some key fobs do not have an antenna, which makes them convenient and practical to use.

System capabilities

When choosing an alarm system, first of all, car enthusiasts pay attention to its capabilities. The set of functions for Starline alarms differs for different models. But what is common to all models is that the security system divides all cars into 9 protected zones, for each of which individual protection methods are established.

The car alarm has the following security functions:

  1. The engine is controlled using relays or StarLine DRR digital radio relays. The relay blocks the motor in case of unauthorized starting.
  2. The ignition switch is controlled.
  3. To protect the doors, hood and trunk, limit switches in the form of buttons are used.
  4. Impact sensors with two levels are provided for the body and windows.
  5. The interior is controlled by an additional sensor.
  6. The release of the parking brake is blocked.

The instructions for the Starline alarm indicate that it can notify the owner of a possible break-in and protect the car in various ways.

The following methods are possible:

  • the signal is transmitted to the key fob with feedback;
  • light and sound warning;
  • possibility to program;
  • possibility of safe locking simulating engine failure;
  • panic mode.

The alarm system is equipped with a processor that controls engine operation and the remote start process. The security system performs its functions automatically or is controlled via a key fob by pressing the appropriate buttons.

Instructions for use

You can install the Starline alarm yourself, but before doing so you should carefully study the operating instructions that come with it.

The instructions contain information on installation, configuration and operation of the security system. If you carry out the installation exactly according to the instructions, then there is a guarantee that the car alarm will be installed correctly.

How to install?

Before installation, you need to prepare the necessary tools:

  • set of wrenches;
  • screwdriver;
  • electric drill;
  • wire cutters;
  • soldering iron;
  • heat shrink caps;
  • tester for checking electrical wiring.

It is better not to use an indicator for testing, as it can damage the sensitive elements.

Installing an alarm consists of the following steps:

  1. Before installing the security system, you need to turn off the power supply to the car.
  2. First of all, you need to find the location of the main alarm elements. The control unit is usually placed in an inaccessible location, such as under the front seat or behind the instrument panel.
  3. The siren is installed in the engine compartment in a place protected from moisture. The antenna should be installed as high as possible so that it does not come into contact with metal parts and electrical wiring.
  4. The sensors should be installed in the passenger compartment to protect them from moisture. The impact sensor should be placed in the center of the vehicle so that the sensitivity can be adjusted to take into account influences from all directions. After installing the sensors, you need to connect them to the main module.
  5. The panic button is installed under the hood away from the engine compartment; there must be a distance of at least 50 cm from heat sources. One of the inaccessible places is the inner surface of the wing.
  6. The LED indicator should be placed on the center console. Its task is to warn potential burglars about what is on the machine.
  7. The switch, LED indicator and panic button must be connected in secure mode. After connecting power and grounding, the installation must be tested.
  8. After connecting all components, you need to check the functionality of the system.

If a false alarm is triggered during testing, then the sensors are highly sensitive. In this case, you need to change their sensitivity.

How to setup?

To enjoy all the benefits of a car alarm, you need to properly configure its autostart and learn how to control the car alarm using a remote control (RC). All operating details are described in the instructions that come with the device.

The remote control is a keychain; there are three possible types:

  • with feedback;
  • no feedback;
  • with feedback and LCD display.

All Starline alarm key fobs have three buttons. The system is controlled by pressing either a single button or a combination of two buttons in different sequences.


The buttons have the following main functions:

  1. Arming with the engine running or not, locking the doors, controlling the shock sensor, starting and shutting down the power unit.
  2. Disabling security, unlocking doors, disabling the immobilizer, disabling the alarm signal, the ability to program silent arming and disabling security, etc.
  3. The search mode starts, allowing you to monitor the condition of the car.

The instructions contain detailed information on how to use all the functions of the Starline alarm system by single, double button presses, as well as a combination of buttons (video author REALAUT0).

A useful feature, especially in winter, is autostart. In Starline security systems, two types of autostart are possible: automatic and remote. Using the remote control, you can warm up the engine before driving. With automatic starting, the engine can be started after a certain time, for example to maintain a constant temperature. You can configure automatic start based on temperature, for example, when it drops below a set value.

To properly configure remote autorun, the following conditions must be met:

  • the gears must be turned off, that is, the gearshift knob must be in the neutral position;
  • the hood and all doors must be closed;
  • the ignition must be turned off;
  • The car must be on the handbrake.

After closing the last door, the alarm will be activated. To remotely start, you need to press button No. 1 and hold it pressed for 3 seconds, then you need to press button No. 2. Next, the system will try to start the engine on its own. If after 4 attempts the engine does not start, a signal will be sent to the key fob and it will make four sounds. If the engine starts successfully, an image of the car will appear on the key fob screen, and it will emit 3 long beeps.

When you press the buttons, the system always reacts in a certain way: it either gives a light or sound signal, or blinks its dimensions, etc. This confirms that the commands have been executed.

Possible faults

To enhance security functions, a lot of electronics are used in the alarm system. As with any device, car alarms may have malfunctions that need to be resolved.

The most common faults:

  • Frequent false alarms: the sensitivity of the shock sensor is incorrectly configured;
  • does not unlock, there is no reaction to signals coming from the key fob: the key fob batteries are low or the battery is not charged enough;
  • The doors do not close when arming: the reasons may be either a malfunction of the car alarm or a malfunction of the door locks.

The key fob is the most vulnerable part of the alarm system. It may become unusable if dropped. If the case or LCD screen is damaged, you can do the repair yourself by purchasing the necessary spare parts. The most unpleasant malfunction is the breakdown of the central unit; this may require serious repairs at a car service center.

If any problems occur, troubleshooting should be done immediately, as the system contains a lot of electronics and can block the engine and fuel pump, and normal operation of the vehicle will be impossible.


Starline security system with auto start

Advantages and disadvantages

One of the main advantages of the Starline alarm system is the ease of installation and installation of the system on the car. The kit includes an instruction manual that helps you understand how to control the system. Therefore, there are no problems with the operation of the alarm.

The Starline alarm has a number of advantages:

  • can be installed on any type of vehicle with a gasoline or diesel engine, automatic or manual transmission;
  • the device is resistant to temperature changes and operates stably in all weather conditions;
  • The keychain is durable with a shockproof design;
  • the system is protected from interference and extraneous signals;
  • Models are equipped with auto start, which increases the comfort of using the alarm.

At a low cost, the Starline alarm system has all the basic sensors and standard functions. Thanks to the choice of models, car enthusiasts select an alarm system according to their requirements with the necessary set of functions.

Depending on the model, Starline car alarms have the following useful functions:

  • auto engine start;
  • the ability to track the vehicle's location by satellite;
  • a large number of channels for radio interference;
  • variety of notification methods, etc.

The disadvantages include a lot of electronics, which, if they malfunction, can cause problems with the operation of the car. But if you monitor the technical condition of the car and the security system, then problems will not arise.

Starline Twage A8 is a security device for cars with the ability to carry out two-way communication and start the engine from a distance. The system is not currently produced, but is often found on the secondary market. Using the Starline A8 instructions, you can install and configure the alarm yourself.

[Hide]

Alarm equipment Starline A8

The A8 alarm system was supplied to customers as a ready-made set of parts for installation. The only configuration option was produced. According to its data, the system is close to the A9 model and differs from it in a simplified set of functions.

The set includes:

  • central block;
  • an antenna module, which includes a device for measuring temperature parameters in the cabin;
  • shock measurement sensor (with two stages);
  • main key fob equipped with two-way communication and a screen;
  • additional one-sided keychain;
  • LED to display operating status;
  • button for setting;
  • additional button to activate the anti-robbery mode;
  • limit switch under the hood panel;
  • wiring harnesses;
  • Starline A8 operating manual.

Below is a photo taken from the A8 Twage kit car.

Starline A8 system components

Technical characteristics of the Starline A8 car alarm

Main parameters of the A8 Twage:

  • operating frequency of the control system 433.92 MHz;
  • control radius using the main key fob - no more than 600 m;
  • pager operating radius - 1200 m (maximum);
  • operating radius of the additional remote control is at least 15 m;
  • current consumption in operating mode - no more than 25 mA;
  • the estimated service life, if all requirements are met, is at least 5 years.

When using a key fob, remember that the operating radius may be reduced due to interference of various natures (buildings, presence of sources of radio noise, weather phenomena).

All electrical circuits are protected by the car's standard fuses. Data on the maximum load on each chain is given in the table.

Advantages and disadvantages

Alarm owners note the following positive aspects:

  • large ranges of the main key fob and pager;
  • low price, as well as the presence of feedback and automatic engine start functions;
  • possibility of expanding options (installation of a roll sensor);
  • ability to work at different ambient temperatures.

The device also has many disadvantages:

  • fragile material of the key fob body, this is especially fraught at low air temperatures;
  • Often there is poor contact in the button modules of remote controls, which is why they need to be pressed with force or several times;
  • in severe frosts, graphics errors appear on the display, which make it difficult to work with the system;
  • no siren included;
  • if there is radio interference, the key fob signal is jammed and is not picked up by the antenna in the car;
  • the motor does not start according to the set time.

It should be noted that the system has been produced since 2003 and today many copies are already more than 7-8 years old. With such a long service life, wear of parts is inevitable, which is the reason for critical reviews.

User VOVAN 716 will tell you how to activate autostart using the Starline alarm system.

Installation instructions

You can install the A8 alarm yourself if you have a little experience in installing similar products.

The procedure is performed step by step as follows:

  1. Think over the location of the elements and begin installing the wiring. You may first need to disassemble the lower part of the instrument panel and remove the protective cover on the steering column. Before starting installation, you must purchase an additional siren, which comes with the bracket.
  2. Remove the wires from the battery terminals. If your car has airbags and a radio with a code, you must follow the instructions for the vehicle.
  3. Connect the system wires to the ignition switch circuits. The connection point must be soldered and insulated with heat shrink tubing or electrical tape.
  4. Connect the remaining power circuits in accordance with the diagram. When installing the system on used cars, it is recommended to call all the wires of the standard harnesses, since they may have been replaced during repairs.
  5. Connect to the instrument cluster harnesses. These channels receive a signal from the tachometer or from the handbrake warning lamp. Connection to the tachometer is required to receive a signal during autostart and is done with a wire with gray-black insulation. An alternative option may be to connect the wire to the generator (the operation of the motor is determined by the appearance of a voltage of plus 12 volts).
  6. Connect all other terminals of the central unit harness. When laying wires, you must ensure that they do not touch moving controls or rub against sharp edges of body panels.
  7. Connect to the control module of the standard central locking. If the vehicle has a pneumatic lock drive, the connection is made to the compressor control unit.
  8. Connect the wire to the brake lamp switch (on vehicles with manual transmission).
  9. Connect the wiring harnesses to the power trunk lid lock terminal (if present) and the interior lighting system.
  10. Connect the low beam headlight power supply circuit to the additional channel (if necessary). This function allows you to turn on the low beam when the system is deactivated and illuminate the road to the car.
  11. If the system is used in automatic mode, a bypass for the standard immobilizer should be installed.
  12. Install the main unit in the dashboard. It is attached to the frame using ties or metal screws. When installing, it is recommended to place the unit with the connectors facing down. You need to make sure that there is no water leaking inside the panel.
  13. Connect the service and anti-robbery button harnesses to the block and bring them to places convenient for the driver and invisible to strangers. For connection, two two-pin connectors are used under the hinged cover. The diode is output either to the top of the panel or to the rack casing.
  14. Mount the antenna module on the glass. To achieve maximum range, it is recommended to place it at a distance of at least 55 mm from metal frames. The module should not be located in the area of ​​the air ducts of the microclimate system or in the area of ​​direct sunlight. This is due to the presence of a temperature sensor in it, which, if the device is installed incorrectly, will show incorrect information. To connect the antenna, a cable with five contacts is used, which is placed on the main unit in the connector located under the hinged cover.
  15. The siren is attached to the engine shield and installed with the horn facing down. The installation site should not be flooded with water while the vehicle is moving or parked. It is important to check that there is no access to the siren itself and its wiring from under the car. The cable to the siren must be laid at a maximum distance from the elements of the ignition system. This rule applies to all alarm harnesses.
  16. Attach a sensor for measuring the impact force in the passenger compartment. It must be rigidly fixed to the metal panels, which will ensure its sensitivity. Adjustment is performed by rotating the built-in potentiometer. It must be remembered that when installing a part on plastic, the device may not operate correctly. A cable with four pins is used for connection.
  17. Place additional “limit switches” under the hood and trunk lids. The sensors must work correctly, otherwise they will cause the majority of false alarms in the system.
  18. Connect all elements with laid strands.
  19. Connect power to the on-board network and test the operation of the system. If everything works correctly, then you can install the removed interior trim elements and program the unit. In case of errors in operation, you will need to check the correct installation.

The advantage of installing an alarm system in a car service center will be saving time, since do-it-yourself installation can take more than one day.

User manual

The instructions for Starline A8 contain the following information:

  • description of components and technical data of components;
  • core capabilities;
  • control system;
  • description of functions;
  • function programming;
  • general installation recommendations;
  • connection diagrams;
  • warranty card.

Below is a brief description of some points that are important when using Starline A8.

Setting up autorun

To configure and perform autostart, you need to set the “neutral” mode:

  1. Stop the car, put the gearbox lever in neutral position.
  2. Raise the brake lever up.
  3. Remove the key from the lock and get out of the car, closing the door behind you.
  4. Turn on the system using the K1 or K1D button. The motor will stop and be ready to start automatically.

The main key fob is used to start the engine. The start-up procedure is possible through the icon on the screen or through a long press on K1. In this case, the car must give a triple signal with a siren and external lamps. After a successful launch, three more flashes are given and the melody in the key fob is turned on. During operation, an icon and the remaining time until deactivation are displayed on the screen. When attempting to start, the starter operating time increases.

In addition, it is possible to automatically start based on a signal from a temperature sensor. In this case, the operating time of the motor and the temperature threshold are programmed in the central unit.

There are four options for setting the response threshold:

  • 10ºС;
  • 20ºС;
  • 30ºС.

When setting up, you need to take into account that there are two restrictions on operation:

  • no more than six alarms are possible per day;
  • At least two hours must pass between two warm-ups.

You can watch the video from user DimASS about programming the Starline A8 key fob.

To program a temperature start via the main key fob, you must:

  1. Select the appropriate icon on the display and activate it by pressing the K2 button.
  2. Wait for confirmation (one siren sound, a melody from the key fob buzzer and a short flashing of external lamps). The screen will indicate the icon of the enabled function and the temperature at which the starter will operate. In this case, the LED on the car will blink in series of three short periods.
  3. If necessary, the function can be turned off using a similar scheme. Deactivation is confirmed by double signaling with sound and light devices.

When operating a vehicle, warm-up can be applied at a certain time; the setting is performed in the following steps:

  1. Select the daily start mode icon and confirm by pressing K2.
  2. The confirmation will be the same as when warming up by temperature. The difference will be the operation of the diode, which should blink in a series of two pulses, and another icon on the display.

During the programming process, you must be in the communication zone between the remote control and the car, since when the mode is activated, a start must occur. The warm-up time is specified in the unit settings. Each subsequent start will be performed after 24 hours until the mode is turned off or until the first unsuccessful start cycle. Disabling is done by placing the cursor on the icon and pressing K2 on the key fob.

If necessary, the motor operating time is extended by:

  • 20 minutes.

To do this, you need to select the corresponding symbol on the screen and activate it. The total operating time will be displayed on the key fob.

Troubleshooting

When the system is turned on, it automatically diagnoses the condition of components and circuits. If there are open doors, four warning lights and short beeps will be given. An icon of the problem unit will be displayed on the main key fob screen. After closing the element, it will be armed.

If it is impossible to quickly resolve the problem, the alarm bypasses this zone. If the breakdown is repaired spontaneously and the system is turned on, this zone is automatically armed.

The following problems may occur:

  1. Dead batteries in the key fob. You should try to control the system using another remote control from the kit. If the system works, then the power supply needs to be replaced. If the problem does not go away, this indicates that the failure is related to the antenna module or the main unit.
  2. If there are constant false alarms, it is necessary to adjust the sensitivity of the shock sensor.
  3. If the locks do not close after turning on the system, then the problem may be blown fuses. It is necessary to check the condition of the circuits (for short circuits) and replace the fuse-links with products of the same rating.
  4. Operational problems may be due to incorrect settings. The alarm can be reset to factory settings and reprogrammed.
  5. An automatically started engine stalls after a few seconds of operation. At the same time, the motor functions normally with the key. To correct the problem, you need to check the additional blocking relay (if it is used in the circuit), the wiring connected to the tachometer, and re-teach the idle mode.

Alarm control key fob Starline A8

To power the control key fobs you should use:

  • AAA battery (main remote control);
  • CR2032 lithium battery (optional).

Replacement of batteries must be carried out in accordance with the manual included in the delivery kit.

Set of pictograms on the display

The letters indicate icons for enabling functions. To move the cursor, use a short press on K3.

Explanation of symbols:

  • anti-robbery (A);
  • additional channel 3 (B);
  • temperature start (C);
  • daily start (D);
  • start from key fob (E);
  • silent operation of the system (F);
  • alarm with siren (G);
  • disabling the shock sensor (H);
  • Valet (I) service;
  • checking the vehicle condition and interior temperature (J);
  • additional channel 2 (K);
  • additional channel 1, on which the trunk lock (L) is located.

The rest of the screen contains information icons for the following purposes:

  • 1 - nutritional status;
  • 2 — additional channel 2;
  • 3 — engine operation based on temperature;
  • 4 — indication of a running motor;
  • 5 — opening the trunk lid;
  • 6 — door opening;
  • 7 — vibration mode of the key fob;
  • 8 — Valet indication;
  • 9 — system restart in automatic mode;
  • 10 - quiet security;
  • 11 - security with alarm;
  • 12 — indication of hood opening;
  • 13 - shock sensor;
  • 14 — handbrake limit switch;
  • 15 — closing the locks;
  • 16 — opening locks;
  • 17 — activity of the receiving device in the key fob;
  • 18 — presence of two-way communication;
  • 19 — call signal;
  • 20 — charge saving mode;
  • 21 — indication of the ignition on;
  • 22 — alarm clock;
  • 23 — AM time mode;
  • 24—RM time mode;
  • 25 — daily autostart;
  • 26 — field for displaying time, information symbols and temperature;
  • 27 - space for data on units of measurement (degrees Fahrenheit or Celsius);
  • 28 — timer activity.

Operating and installation instructions

Technical characteristics of car alarms

Radio control signal coding dynamic
Radio control signal carrier frequency 433.92 MHz
Maximum pager range 1200 m*
Maximum range of key fobs with feedback 600 m*
Maximum range of the key fob without feedback 15m*
Working temperature from -40 to +85 °С
DC supply voltage 9-18V
Current consumed by the alarm system in security mode 20mA
Maximum permissible current at the outputs:
siren connection circuits 2A
side light connection circuits 2x7.5A
control circuits for electric door lock drives; 15A
circuits of additional control channels 300 mA
engine blocking electric relay control circuits 300 mA

* The range of the key fob and pager may be reduced depending on the location of the transceiver in the vehicle, the location of the vehicle and the user, radio frequency interference, weather conditions, vehicle battery voltage and key fob battery.

Car alarm capabilities

Protected areas of the car and methods of protecting them
  • Engine - from start (electric locking relay)
  • Doors, hood, trunk - from opening (push-button switches)
  • Body, windows - from shocks and shocks (two-level shock sensor)
  • Interior - anti-intrusion (additional two-level sensor)
  • Ignition - from switching on (ignition switch control input)
  • Parking brake - off
Car alarm security
  • Dynamic control code, protected from selection and interception
  • Limiting the number of alarm cycles
  • Interrupting alarms without disarming
  • Remembering the initial alarm state when the power is turned off
  • Personal emergency shutdown code
Protective functions of car alarms
  • 9 independent security zones
  • Sound and light alarms when security sensors are triggered
  • Providing alarm notification signals to the key fob with feedback
  • Programmable output for engine blocking: NO/NC contact type
  • Programmable immobilizer mode
  • Two modes for enabling the anti-robbery function
  • Safe engine blocking in anti-theft mode
  • Panic mode
Self-diagnosis and indication of operating modes
  • Monitoring the vehicle’s condition, operating modes and reasons for alarm activation using the LED indicator on the dashboard and indicators on key fobs with feedback
  • Automatic monitoring of security sensors with disabling faulty ones and reporting this
  • Sound and light indication of alarm activation
  • LED indication of serviceability of limit switches of doors, hood, trunk
Car alarm service functions
  • Turning on/off security mode without a key fob
  • Automatic (passive) activation of the security mode
  • Silent activation/deactivation of security mode
  • Enabling security mode with delayed activation of door, hood, and trunk sensors
  • Security mode with engine running
  • Security mode with the built-in shock sensor turned off
  • Possibility of remote disabling / enabling of the shock sensor and additional sensor by levels multiple times during 1 security cycle
  • Remote door lock control
  • Control of door locks from the ignition key
  • Controlling door locks by pressing the foot brake pedal
  • Two-step door unlocking
  • Double-pulse door unlocking
  • Possibility of implementing the "comfort" function
  • Remote activation/deactivation of Valet service mode
  • 2 channels for controlling additional vehicle devices
  • Polite car interior lighting mode
  • Car search mode
  • Remote configuration mode for the built-in shock sensor
  • Remote programming mode for new and erasing old key fobs
  • Control of the number of key fobs in the alarm memory
  • Possibility of quickly resetting programmable functions to factory presets
  • Remote engine start/stop when working with the StarLine launch module
  • Timer engine start mode when working with the StarLine launch module
  • Special interface for connecting a security search GSM / GPS module
  • Key fob button blocking mode
  • Energy saving mode of key fobs with feedback
  • Monitoring the battery discharge of the key fob with an LCD (in the A4 model)
  • Fluorescent illumination of the key fob display with LCD (in the A4 model)

Control key fobs

The alarm performs its functions either automatically or by signals from the key fob when buttons are pressed. Some of the provided functions and some alarm operating parameters can be changed by programming.

Alarms StarLineTwage A4, A2, A1 have various 3-button control key fobs. The purpose of buttons 1, 2 and 3 is the same for different control key fobs.

When the alarm executes a command sent from any key fob, the corresponding information is displayed on the indicator of other key fobs with feedback, provided that they are recorded in the alarm memory. The display of information is accompanied by sound signals and vibration. The luminescent backlight of the indicator in the LCD key fob turns on.

LCD key fob with feedback

Key fob batteries and their replacement

Different key fobs use different batteries:

  • the key fob without feedback uses 1 element of type CR2032, ZV
  • The LED key fob uses 2 batteries type CR2032, ZV
  • The LCD key fob uses 1 AAA battery, 1.5V.

The operating time of the key fob batteries depends on: the frequency of use of the key fob, the frequency of operation of the pager, the selected alert mode, and the type of installed battery. The capacities of commercially available batteries may differ several times.

The average operating time of batteries can be:

  • for key fob without feedback from 9 to 12 months
  • for key fob with feedback and LED from 3 to 6 months
  • for key fob with feedback and LCD from 6 to 9 months

To increase the battery life of the LCD key fob, a special energy saving mode is provided, which turns on automatically 1 minute after the security mode is turned off. In this mode, the consumption of the key fob is reduced to a minimum by turning off the electrical circuit of the receiver.

Enabling the energy saving mode is accompanied by the disappearance of the icon from the LCD key fob indicator.

When the battery in the LCD key fob is discharged, an icon is displayed on the indicator, indicating the need to replace it.

Replacing batteries in key fobs with feedback is performed in the following order:
  1. Open the cover on the back of the key fob and remove the old battery.
  2. Install new batteries, observing polarity. The correct position of the battery is indicated on the key fob body under the cover. Close the key fob cover.
Replacing batteries in a key fob without feedback is performed in the following order:
  1. Unscrew the screw on the back of the key fob and open the cover.
  2. Remove the old battery and install a new one, observing the polarity. The correct position of the battery is indicated on the key fob body under the cover. Close the key fob cover and tighten the fastening screw.

LCD key fob with feedback for the StarLine Twage A4 alarm system


Icons with letter designations - indication of car alarm operating modes
  1. VALET service mode enabled
  2. Shock sensor and additional sensor bypass mode enabled
  3. Automatic engine start mode by timer is enabled
  4. Passive arming mode enabled
  5. Immobilizer mode enabled
Operational programming of the above operating modes

Entering the programming mode is done by pressing and holding button 3 of the key fob until a melodic signal appears first, then 1 short beep of the key fob. The key fob indicator will display one of the icons corresponding to the programmed alarm operating mode.

Switching on/off the programmable mode is carried out by single pressing button 1 or 2 of the key fob. Turning on the mode is confirmed by the display of the programmable function icon, turning it off is confirmed by the disappearance of the programmable function icon.

The transition from one programmable function to another is carried out in a circle by single pressing button 3 of the key fob.

Exit from the programming mode is carried out by pressing and holding button 3 of the key fob until 1 long sound signal from the key fob appears or automatically if no key fob buttons are pressed within 10 seconds.

Icons with digital designation - indication of vehicle status and car alarm
  1. Level 2 shock sensor or additional sensor triggered
  2. Additional sensor bypass enabled
  3. Trunk open
  4. The foot brake pedal is pressed or the parking brake is released
  5. Engine running
  6. The door is open
  7. Hood open
  8. Ignition on
  9. VALET service mode activated
  10. Anti-theft function enabled
  11. Control key lock enabled
  12. The key fob battery is low
  13. Confirmation tones enabled
  14. Confirmation beeps disabled
  15. Level 1 shock sensor or additional sensor triggered
  16. Door locks are open
  17. Door locks are closed
  18. Key fob receiver included
  19. Built-in shock sensor bypass enabled

Purpose of key fob buttons

Button 1
  • Activating security mode (single press)
  • Activating the security mode with the engine running (sequential, then single press)
  • Locking the doors when the ignition is on (single press)
  • Disable/enable shock sensor by levels (double press)
  • Start/stop the engine (sequential pressing)
Button 2
  • Disabling the security mode (single press)
  • Turning off the immobilizer mode (single press)
  • Programming the silent arm/disarm function (two long presses)
  • Unlocking the door locks with the ignition on (single press)
  • Disable/enable additional sensor by levels (double click)
  • Activation of additional channel No. 1 (sequential pressing)
  • Turning off the anti-robbery mode (two single clicks)
  • Cancel alarms (single press)
Button 3
  • Turning on the "search" mode (double click)
  • Vehicle status monitoring (single click)
Buttons 1 and 2 in sequence
  • Turning on/off the engine start mode by timer
Buttons 2 and 1 in sequence
  • Turn on/off VALET mode
Buttons 3 and 1 in sequence
  • Enabling/disabling the automatic arming function
Buttons 3 and 2 in sequence
  • Enabling/disabling immobilizer mode
Buttons 1+2 simultaneously
  • Turning on the "panic" mode (long press with the ignition off)
  • Enabling the anti-robbery mode (long press with the ignition on)
Button 1+3 simultaneously
  • Enabling key fob button locking (single press)
Buttons 2 + 3 simultaneously
  • Disabling the key fob button lock (single press)
  • Turn on/off the built-in shock sensor setting mode (long press)

Duration of pressing key fob buttons

In order for the alarm system to adequately respond to control signals sent from key fobs, the duration of pressing the key fob buttons is extremely important.

When further describing the alarm operation algorithms in the text, the following definitions of the duration of pressing the control key fob buttons will be used:

  • Single button press- one press of any button for less than 0.5 seconds.
  • Long press button- pressing and holding the key fob button until a melodic sound signal appears (for an LCD key fob), until a melodic sound signal appears and the green LED lights up ARM(for an LED key fob), until the green LED lights up (for a key fob without feedback).
  • Double button press-two presses of one button within 0.5 seconds.
  • Consecutive button presses- two presses of the same or different buttons. The first press should be long, the second press should be single.

Car alarm management

Enabling security mode from the key fob

Before turning on the security mode, make sure that the ignition is turned off, the doors, hood, and trunk are securely closed. The security mode is activated by pressing button 1 of the key fob once. Confirmation will follow:

Central block- 1 siren sound and 1 size flash. Automatic locking of the locks will occur if they are connected to the alarm system. The LED indicator will begin to flash slowly, indicating that the vehicle is secured. The engine lock will turn on.

LED key fob red indicator flash ARM and 1 beep.

Keychain LCD

Attention!

  1. If you need to turn off the confirmation beeps when you turn on the security mode, you need to program the silent on/off function of the security mode. See item "Programming silent arming/disarming"
Enabling security mode without a key fob

Enabling the security mode without a remote control key is carried out as follows:

  1. With the ignition on, open the door. The LED will flash to indicate the serviceability of the open door limit switch.
  2. Press the VALET service button 3 times. The LED indicator will go off temporarily (approximately 5 seconds).
  3. While the LED is off, turn off the ignition. The alarm will start a 20-second countdown before then arming. To confirm the start of the countdown, 1 siren sound and 1 flash of dimensions will follow.
  4. Get out of the car and close the driver's door with the key. Make sure that the locks of the other doors, hood, and trunk are also closed.

After a 20-second time interval, the alarm will automatically turn on the security mode, regardless of the state of the doors, hood, and trunk. Confirmation will follow:

Central block-1 size flash. The LED indicator will begin to flash slowly, indicating that the vehicle is secured.

Attention! If, at the time the security mode is turned on, the doors, hood, trunk are poorly closed, and the foot brake is pressed (or the parking brake is turned off) or one of the push-button switches for the doors, hood, trunk, foot (parking) brake is faulty, then the alarm will automatically turn off this zone without any - additional warning signals.

Activating the security mode with the engine running

Activation of the security mode with the engine running is carried out as follows:

Attention!

  1. If the doors, hood, trunk are poorly closed or one of the push-button switches for the doors, hood, trunk, or foot (parking) brake is faulty, the alarm will warn about this with additional signals. See the item "Self-diagnosis when turning on the security mode."
  2. On cars with a manual transmission, when the alarm system is working with the StarLine 02 engine starting module, turning on the security mode with the engine running is possible only when the “soft neutral” mode is automatically turned on.
Automatic arming (programmable function)

If the automatic security function is turned on, then after each ignition is turned off and the last door is closed, warning signals will follow from the central unit: 1 siren sound and 1 headlight flash.

After 10 seconds, the alarm will automatically turn on the security mode. Confirmation will follow:

Central block- 1 siren sound and 2 headlight flashes. Automatic locking of the locks will occur if they are connected to the alarm system. The LED indicator will begin to flash slowly, indicating that the vehicle is secured. The engine lock will turn on.

LED key fob red indicator flash ARM and 1 beep.

Keychain LCD- display of icons and 1 sound signal.

Attention!

  1. For programming the automatic arming function, see below.
  2. If one of the door push-button switches is faulty, the security mode will not automatically turn on.
  3. If the doors, hood, trunk are poorly closed, and the foot brake is pressed (or the parking brake is turned off) or one of the push-button switches for the doors, hood, trunk, or foot (parking) brake is faulty, the alarm will warn about this with additional signals. See the item "Self-diagnosis when turning on the security mode".
Activation of the security mode with delayed activation of door, hood, and trunk sensors (programmable function No. 3)

The alarm system provides the ability to program a delay in the activation of the door, hood, and trunk sensors after turning on the security mode for 5, 30.45 seconds, or only the door sensors for 60 seconds. The specific activation delay time of various security sensors is determined by the selection of the operating mode of programmable function No. 3. See paragraph "Programming functions and operating parameters".

Attention!

  1. If the 30 or 45 second delay mode is selected, then the end of the time delay for the activation of sensors is accompanied by 1 flash of the dimensions, after which all previously disabled zones are armed, with the exception of the case of bypassing faulty areas of the hood and trunk.
  2. When potentially controlling the interior light after closing the last door, it is recommended to program a 60-second delay, with pulse control - a 30 or 45 second delay.
Turning off the security mode from the key fob

The security mode is turned off by pressing button 2 on the key fob once. Confirmation will follow.

Central block- 2 siren beeps and 2 headlight flashes. Automatic unlocking of the locks will occur if they are connected to the alarm system. The LED indicator will turn off. The engine lock will turn off.

LED key fob-1 green indicator flash DISARM and 2 beeps.

Keychain LCD

Attention!

  1. If, when the security mode is turned off, 4 siren beeps and 4 headlight flashes sound, this means that the security sensors were activated in the security mode. See item "Self-diagnosis when disarming the security mode".
  2. If you need to disable confirmation beeps when disarming the security mode, you must program the silent arming/disarming function. See item "Programming silent arming/disarming"
Disabling the security mode while the engine is running

The security mode is turned off when the engine is running by pressing button 2 on the key fob once. Confirmation will follow:

Central block- 2 siren beeps and 2 headlight flashes. Automatic unlocking of door locks will occur if they are connected to the alarm system. The LED indicator will turn off. The engine is running.

LED key fobDISARM and red indicator RUN, 5 red indicator flashes TRIGGER and 2 beeps.

Keychain LCD- display of icons , , and 2 sound signals.

Emergency disarming of security mode (without key fob)

The algorithm for disabling the security mode without using remote control key fobs depends on the selected operating mode of programmable function No. 5.

  • If selected shutdown mode without entering a personal code, then you should perform the following procedure:

    Open the door with the key. Alarm signals or 4 flashes of dimensions will follow (if the security mode was turned on without the key fob). Within 20 seconds, turn on the ignition and press the VALET service button 3 times. Turn off the ignition. The security mode will turn off and the engine will be unlocked.

  • If selected shutdown mode by dialing a 2-digit personal code, then you should perform the following procedure:
    1. Open the door with the key. 4 flashes of dimensions will follow and a 20-second countdown will begin, during which it is necessary to open the door and turn on the ignition.
    2. Press the VALET service button the required number of times equal to the first number of the personal code.
    3. Press the VALET service button the required number of times equal to the second number of the personal code.
    4. Turn off the ignition. The security mode will turn off if the code is entered correctly. As confirmation, 2 flashes of dimensions will follow.
Automatic return to security mode in case of accidental shutdown

If the car doors are not opened within 30 seconds after disarming the security mode, the alarm will automatically turn on the security mode. This protects against turning off the security mode by accidentally pressing button 2 on the key fob, as well as in the event that you, having turned off the alarm, change your intention to get into the car and forget to turn on the security mode. The alarm will do this for you automatically. Confirmation will follow:

Central block- 1 siren sound and 2 headlight flashes. Automatic locking of the locks will occur if they are connected to the alarm system, and function No. 7 is programmed to control the door locks. The LED indicator will begin to flash slowly, indicating that the vehicle is secured. The engine lock will turn on.

LED key fob-1 red indicator flash ARM and 1 beep.

Keychain LCD- display of icons and 1 sound signal.

Self-diagnosis when turning on the security mode

If, when the security mode is turned on, the doors, hood, trunk are poorly closed, the parking brake is not applied, or one of the push-button switches for the doors, hood, trunk, or parking brake is faulty, then the faulty zone will be temporarily excluded from the security circuit and the following will follow:

Central block

LED key fob TRIGGER indicating a faulty zone. See the correspondence table.

Keychain LCD- display of the faulty zone icon and 1 long beep.

Attention! If the cause of the malfunction cannot be eliminated on site, the system will turn on the security mode by bypassing the faulty zone. In case of spontaneous elimination of a malfunction while the security mode is on, the alarm will immediately arm the previously bypassed zone.

Self-diagnosis when disarming the security mode

If the alarm was triggered in the security mode in the absence of the owner (for example, the doors, hood, trunk were opened, the ignition was turned on, the parking brake was turned off, the second levels of the shock sensor or additional sensor were triggered) and the alarm signals were not interrupted from the key fob, then when the security mode is turned off, the following will follow:

Central block- 4 siren beeps and 4 headlight flashes.

LED key fob- 1 long beep and indicator flashes TRIGGER indicating the last reason for the alarm to go off in security mode. See the correspondence table.

Keychain LCD-1 long beep. The indicator will display an icon corresponding to the last reason the alarm was triggered in security mode.

Correspondence table between TRIGGER LED flashes and security zones
Secured territory TRIGGER LED flashes
Doors 2 red
Hood 3 red
Trunk 4 red
Ignition 5 red
Foot (parking) brake 6 red
1 level shock sensor 2 orange
Shock sensor level 2 3 orange
1 additional level sensor 4 orange
2nd level additional sensor 5 orange

Security and anti-theft functions

Alarms

If any of the security sensors are triggered in security mode, the following will follow:

Central block-sound signals from the siren, flashing side lights, turning on the interior lights, if the alarm output (blue wire) is programmed to turn on the courtesy backlight.

Alarms sound in cycles. The duration of one alarm cycle and the maximum possible number of cycles when different alarm sensors are triggered are shown in the table below.

Cause of alarm Duration of one alarm cycle Max, number of cycles with continuous sensor activation Max, number of cycles for short-term sensor activation
1 level remote control or additional. sensor 3 beeps 6 flashes 8 (levels 1 and 2 in total) 1
Level 2 remote control or additional sensor 30 sec. sound 30 sec. light 8 (levels 1 and 2 in total) 1
Doors 30 sec. sound 30 sec. light 5 1
Hood 30 sec. sound 30 sec. light 5 1
Trunk 30 sec. sound 30 sec. light 5 1
Foot brake 30 sec. sound 30 sec. light 5 1
Ignition 30 sec. sound 30 sec. light without limitation 1

Note

  1. If the alarm signals from the key fob were interrupted, then the counting of the number of alarm cycles with a periodically triggered sensor begins again.
  2. If, after the end of all alarm cycles, the cause of the alarm is not eliminated (for example, the doors remain open), then the corresponding security zone is temporarily excluded from the security circuit until the cause of the alarm is eliminated (for example, after the doors are closed).
  3. If the confirmation sounds are turned off, then when the 1st level of the shock sensor and the additional sensor are triggered, there will be no audible alarm signals.

LED key fob- 30-second alarm sound, indicator flashes TRIGGER. By the color and number of flashes, you can determine the last cause of the alarm according to the table below.

Keychain LCD- 30-second vibration and audible alarms. One of the icons corresponding to the last reason the alarm was triggered will appear on the key fob indicator.

Interrupting alarms

Alarm signals can be interrupted without disabling the security mode by pressing button 2 on the key fob once. In this case, the alarm will remain in armed mode.

If at the time the alarm signals are interrupted, the cause of the alarm has been eliminated, then the sound signals and indication of the triggered zone on the feedback key fobs will stop.

If, at the time the alarms are interrupted, the cause of the alarm has not been eliminated, the corresponding icon will continue to be displayed on the key fob display. The security zone will be temporarily excluded from the security circuit. The icon on the LCD key fob indicator will go out only after the cause of the operation has been eliminated; 1 siren beep and 1 key fob beep will sound as confirmation.

Security of the alarm system against power failure

When there is a power outage, such as a car battery reset, the alarm remembers its state. When power is restored, the alarm will return to its original mode. LED indication of the status of alarm operating modes is given in the table below

Engine lock

The engine blocking is maintained during the entire security period. The carjackers' attempts to start the engine, despite the alarm signals, will be useless. Even if the central alarm unit is detected and disconnected from the cable connectors, the engine will remain locked if the engine lock is correctly performed.

Anti-robbery mode activated from the key fob

Enabling anti-robbery mode from the key fob is carried out with the ignition on by simultaneously long pressing buttons 1 and 2 of the key fob. Confirmation will follow:

Central block- sound and light alarms. Automatic locking of door locks will occur if they are connected to the alarm system. The engine lock will be activated immediately or after pressing the brake pedal, depending on the state of programmable function No. 11. During the first 30 seconds the engine will be blocked in pulse mode, then continuously.

LED key fob RUN, TRIGGER and audible alarm.

Keychain LCD- display icons HIJACK

Turning off the anti-robbery mode carried out with the ignition off by two single presses of button 2 on the key fob. The first press stops the alarms. The LED indicator will begin to flash slowly, indicating that the security mode is on. By the second press - you turn off the security mode by opening the door locks if they are connected to the alarm system and turning off the engine lock. Confirmation will follow:

Central block- 2 siren beeps and 2 headlight flashes.

LED key fob- red indicators light up RUN, TRIGGER and 2 beeps.

Keychain LCD- display icon and 2 sound signals.

Passive activation of anti-robbery mode

Passive activation of the anti-robbery mode is carried out in 3 stages. At the 1st stage, the standby mode is turned on, at the 2nd stage, warning signals are turned on, at the 3rd stage, the anti-robbery function is activated.

stage 1 - turn on standby mode

With the ignition on, press the VALET service button once. The alarm will enter standby mode, without any indication. The enabled standby mode can only be controlled using the LCD key fob. After pressing button 3 of the key fob, an icon will appear on the indicator HIJACK.

stage 2 - turning on warning signals

After opening the door, the LED indicator will flash frequently to indicate the upcoming activation of the anti-burglary mode.

After closing the door, flashes of the side lights will be added to the LED flashes, signaling the upcoming activation of the anti-burglary mode.

stage 3 - enabling anti-robbery mode

After 30 seconds, the siren will sound intermittently. After another 30 seconds, the siren sounds will become constant. Door locks will lock if they are connected to an alarm. The engine lock will be activated immediately or after pressing the brake pedal, depending on the state of programmable function No. 11. During the first 30 seconds the engine will be blocked in pulse mode, then continuously.

Key fob with LED- indicator flashes TRIGGER and audible alarms.

Keychain with LCD- display icons HIJACK, , , , accompanied by a vibration signal and an audible alarm.

Turning off the anti-robbery mode

After activating 1 or 2 stages, the anti-robbery mode is turned off by pressing button 2 on the key fob once.

After activating stage 3, the anti-robbery mode can be turned off in two ways, depending on the state of programmable function No. 5.

If selected shutdown mode without entering a personal code, then you should perform the following procedure:

  1. Press and hold the Valet service button for 3 seconds. After that, turn off the ignition. The alarm will go into security mode.
  2. To turn off the security mode, open the door. Within 20 seconds, turn on the ignition and press the Valet button 3 times. Turn off the ignition. The security mode will turn off and the engine will be unlocked.

If selected shutdown mode by dialing a personal code, then you should perform the following procedure:

  1. With the door open and the ignition on, press the Valet service button the required number of times equal to the first number of the personal code.
  2. Turn off and turn on the ignition again.
  3. Press the Valet service button the required number of times equal to the second number of the personal code.
  4. Turn off the ignition. The anti-robbery mode will turn off if the personal code is entered correctly.
Immobilizer mode (programmable function)

Turning on/off the immobilizer function is carried out by sequentially pressing buttons 3 and 2 of the key fob

  • enabling the immobilizer function accompanied by:

    Central block-1 size flash.

    LED key fob TRIGGER

    Keychain LCD- icon display IMMOBILIZE and a melodic sound signal.

    If the programmable immobilizer function is enabled, the engine will be automatically locked 30 seconds after each ignition is turned off, regardless of whether the security mode is turned on or not. Activation of the immobilizer function is indicated by a constant lighting of the LED indicator when the ignition is turned on.

    You can unlock the engine until the next ignition is turned off by pressing button 2 on the key fob once or by pressing the Valet service button once when the ignition is turned off. The LED indicator will turn off.

  • deactivation of the immobilizer function is accompanied by:

    Central block- 2 size flashes.

    LED key fob- melodious sound signal.

    Keychain LCD- icon disappearance IMMOBILIZE and a melodic sound signal.

Service functions

Programming the silent arming/disarming function

Programming the function of silent activation/disabling of the security mode is carried out by two long presses of button 2 of the key fob.

.
Programming the automatic arming function

Programming the function of automatically turning on the security mode is carried out by sequentially pressing buttons 3 and 1 of the key fob.

  • enabling the function is accompanied by:

    Central block-1 size flash.

    LED key fob- the orange indicator lights up DISARM and a melodic sound signal.

    Keychain LCD- icon display LAST DOOR ARM and a melodic sound signal.

  • deactivating the function is accompanied by:

    Central block- 2 size flashes.

    LED key fob- green indicator lights up DISARM and a melodic sound signal.

    Keychain LCD- icon display LAST DOOR ARM and a melodic sound signal.

Remote activation of panic mode

The “panic” mode is activated by simultaneously long pressing buttons 1 and 2 of the key fob. There will be 3 siren beeps, 3 headlight flashes and a beep from the remote control with feedback.

Attention! If the security mode was previously turned off, then when the “panic” mode is turned on, the door locks are locked immediately and the security mode is activated.

Remote activation of the "search" mode

Regardless of the alarm operating mode, the search mode is activated by double pressing button 3 of the key fob. There will be 6 beeps, 6 headlight flashes and a beep from the borate-coupled key fob.

Attention! After the search mode ends, the initial alarm state does not change.

Remote control of central locking with ignition on

When the ignition is on, a single press of button 1 of the key fob leads to the closing of the door locks, and a single press of button 2 of the key fob leads to the opening of the door locks. The following indication of key fobs with feedback will follow:

Automatic door lock control (programmable function No. 2)

The alarm allows you to program 4 different operating modes of the automatic door lock control function, depending on the state of the programmable function No. 2.

Mode 1- the locks will close after pressing the foot brake when the ignition is on, and will unlock immediately after the ignition is turned off;

Mode 2- the locks will be locked immediately after the ignition is turned on, and unlocked immediately after it is turned off;

Mode 3- only unlocking the locks immediately after turning off the ignition is enabled.

Mode 4- the automatic door lock control function is disabled.

Controlling the operation of the built-in shock sensor

Disabling the shock sensor by level and turning it back on an unlimited number of times during one security cycle is carried out by double pressing button 1 of the key fob. The first double click turns off the first sensor level, the second click turns off both sensor levels, the third click turns on both sensor levels, the fourth click turns off the first sensor level again, and so on in a circle.

Controlling the operation of an additional sensor

Disabling the additional sensor by level and turning it back on an unlimited number of times during one security cycle is carried out by double pressing button 2 of the key fob. The first double click turns off the first sensor level, the second click turns off both sensor levels, the third click turns on both sensor levels, the fourth click turns off the first sensor level again, and so on in a circle.

Control of additional channel No. 1 (programmable function No. 9)

Additional channel No. 1 (yellow-black wire) can be activated remotely regardless of the alarm operating modes. The channel operation duration is 1 sec, 10 sec, 30 sec or without time limit (latch mode), determined by the state of programmable function No. 9.

The channel is activated by sequentially pressing button 2 of the key fob. Confirmation will follow:

Central block- 3 size flashes and output activation (yellow-black wire)

LED key fob- red indicator lights up ARM and 3 beeps.

Keychain LCD-3 beeps. If the channel is used to remotely unlock the trunk, then after unlocking the trunk, a flashing icon will appear on the key fob indicator

Note! When the security mode is turned on, the trunk area, shock sensor and additional sensor are bypassed until the trunk is locked. To confirm the end of bypassing the sensors, 1 beep will sound from the key fob, and the flashing icon of the open trunk will disappear.

Control of additional channel No. 2 (programmable function No. 6)

Additional channel No. 2 (blue wire) is activated automatically depending on the operating mode of programmable function No. 6.

Mode 1- the channel is automatically activated for 30 seconds when the security mode is turned off and simultaneously with the appearance of alarm signals in the security mode. This mode can be used, for example, to turn on the “polite” interior lighting.

Mode 2- the channel is automatically activated for 30 seconds when the security mode is turned on. While the channel is operating, the shock sensor is turned off. This mode can be used, for example, to automatically raise 4 car windows in sequence.

Mode 3- the channel is automatically activated for 15 seconds when the security mode is turned on. While the channel is operating, the shock sensor is turned off. This mode can be used, for example, to automatically raise 2 car windows at the same time.

Mode 4- the channel is automatically activated for 0.8 seconds after the security mode is turned off with each single press of button 2 of the key fob. This mode can be used to implement the function of 2-step unlocking of door locks when the security mode is turned off. To implement the 2-step unlocking function, the driver's door lock and the other door locks must be connected in accordance with the diagram given on page 43. In this case, when the security mode is turned off, only the driver's door will be unlocked. To remotely unlock other doors, you need to activate the additional channel output.

Locking key fob buttons
  • The locking of the key fob buttons is activated by simultaneously pressing buttons 1 and 3 of the key fob once. Confirmation will follow:

    Keychain without feedback- pressing any button is accompanied by a green flash of the LED indicator.

    LED key fob- green indicator lights up DISARM and 1 beep. Pressing any button is accompanied by a green flash of the indicator DISARM.

    Keychain LCD- icon display BUTTON LOCK and 1 beep.

  • The locking of the key fob buttons is turned off by simultaneously pressing buttons 2 and 3 of the key fob once.
Valet service mode

To temporarily disable the security and anti-theft alarm functions, for example, when transferring the car to a service station, it is recommended to enable the Valet service mode.

In the Valet service mode, the function of remote control of locking/unlocking doors, control of additional channels, and activation of the “search” mode continue to work.

The VALET service mode is turned on/off when the security mode is off and the ignition is off by successively pressing buttons 2 and 1 of the key fob.

  • enabling VALET service mode accompanied by:

    Central block- 4 flashes of dimensions and lighting of the LED indicator.

    LED key fob- an orange flash of the RUN indicator and a melodic sound signal.

    Keychain LCD- displaying the VALET icon and a melodic sound signal.

  • disabling the VALET service mode accompanied by:

    Central block- 3 flashes of dimensions and extinguishing of the LED indicator.

    LED key fob- green indicator flash ARM and a melodic sound signal.

    Keychain LCD- icon disappearance VALET and a melodic sound signal.

Control of the number of key fobs recorded in the alarm memory

The number of key fobs recorded in the alarm memory is controlled by the number of flashes of the LED indicator on the car’s dashboard after pressing button 3 of the key fob once with the ignition on.

Monitoring the vehicle condition and alarm operating mode (only for models A4, A2)

The vehicle's condition is monitored by a single press of button 3 on the remote control with feedback. The answer will follow.