Useful tips 

Change the fuel filter on Camry 40. Fuel filter Toyota Camry V40. When to change the fuel filter on a Camry

According to the regulations, replacing the Toyota Camry fuel filter is carried out at 100 thousand km, but in some cases the replacement is carried out much earlier - if certain signs appear that directly indicate a weak fuel supply. Of course, it could be the pump itself. But replacing the filter is the initial step in identifying a malfunction in case of poor fuel supply and a drop in pressure at maximum load, when fuel is consumed the most. If the filter has poor permeability, the pressure in the system does not have time to recover. Poor atomization of a small amount of fuel occurs and, as a result, poor combustion of the poor-quality mixture occurs. Accordingly, the car either loses a lot of traction, or misfires occur and the car begins to twitch. The first stage of diagnostics is measuring the fuel pressure with the engine running. With its help, you can determine whether the fuel pressure in the system drops under critical load or not. The load can be generated by sharply pressing the gas pedal. The fuel filter may become clogged due to poor quality dirty fuel. It won’t clog the first time, but two or three refills of low-quality fuel may be enough.

On modern Toyota and Lexus cars, fine fuel filters have smoothly moved from under the soot space into the capacity of the gas tank itself. To replace it, many models have technological holes under the rear seat. In some, you will have to remove the gas tank to replace the fuel filter. For example, this is the third generation Toyota RAV4.

Let's look at one example in practice.

The procedures carried out when opening the tank are very dangerous and require careful attention and accuracy when performing certain work. The slightest spark, even a static spark from a frayed sweater, can ignite fuel vapors.


We raise the rear seat, under which there is a technological hatch. We open it - it is glued to a thick bitumen mixture. And here everything is in full view.


Disconnect the fuel pipe and wiring harness from the fuel pump housing. We blow out all the dust and dirt from the body and around it so that it does not get inside the gas tank. We unscrew all the bolts around the thrust ring and pull out the ring itself.


We take the fuel filter out of the tank onto the workbench for further disassembly and replacement with a new filter. As you can see in the photo, the fuel filter mesh is dark - it needs to be washed and blown out for subsequent installation. There is no need to change it; it is a coarse filter and traps large debris. Visually compare the new filter with the old one.


We disassemble the pump housing into its component parts. This is a bottom cover with a fuel level sensor, a pump with a mesh and a check valve for regulating gasoline pressure in the fuel rail.

An important element of a car's fuel system is the fuel pump. Its task is to pump fuel from the tank to the engine. The need for this part is due to the design of the car itself - the engine and gas tank are located in different parts of the body.

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline!

In the design of the Toyota Camry V40, with an engine capacity of 2.4 cubic meters. An electric type fuel pump is used, which is located inside the fuel tank. This arrangement of the unit is due to the fact that the electric pump, during operation, makes a lot of noise and heats up. Fuel supply volumes and other indicators of the fuel system are monitored by the on-board computer.

The operation of the electric pump is completely dependent on the vehicle's electrical system, and it begins to work the moment the engine starts. A special relay (fuse) is responsible for turning the pump on and off, which transmits an electrical signal when the key is turned in the ignition switch. The moment an electrical signal is sent to the engine, rotation starts inside the pump, which creates pressure that can push fuel directly into the engine.

Causes and main symptoms of failure

Often, the fuel pump itself cannot be restored, so if it breaks, it needs to be completely replaced. Because This is a technically complex part, so it is not cheap. The high price is due to the high quality of the materials used, because over the entire period of its operation, the gas pump, under the influence of temperature and vibration, must pump a large amount of fuel. The main reasons for fuel pump failure include:

  • untimely replacement of the fuel filter;
  • use of low quality fuel (clogged or with impurities);
  • regular driving on an “empty tank”.

In addition, the fuel pump does not always fail completely; its breakdown is often caused by malfunctions of individual components (fuel filter, injectors, etc.). The following signs indicate that it is time to change the pump:

  • the occurrence of unusual noise when the engine is running;
  • the car began to stall frequently or stopped starting;
  • there is no noise characteristic of the operation of a fuel pump;
  • troits engine;
  • Engine power has dropped.

To maximize the life of the fuel pump, it is recommended to monitor the quality and level of fuel in the tank. In addition, professional mechanics advise regularly cleaning the gas tank itself, and also making sure that no water gets into it.

How to choose a fuel pump

When choosing a replacement fuel pump for a Toyota Camry V40, you should focus not only on its cost, but also on the manufacturer. It is generally accepted that original spare parts are of high quality and technical performance. Of course, the components from the Toyota manufacturer are guaranteed to fit and there will definitely be no problems with their installation. In the catalogs of various online stores you can find original gasoline pumps, as well as high-quality analogues.

For example, the original pump No. 2322166040 can cost 7,600 rubles, and the analogue No. 2322028070 costs 2,000 rubles. A cheaper analogue for No. 2322166040 is No. 232210A030, costing only 900 rubles.

In order to choose the right part for the Toyota Camry V40, you need to know the year of manufacture of the car. There are models of fuel pumps that are sold completely assembled, and there are also those that require a fuel filter to be purchased as a kit. Whatever pump you purchase, remember that the normal functioning of the entire fuel system of the car depends on its quality.

How to install a fuel pump

To replace the fuel pump on a Toyota Camry V40, it is better to contact specialists: mechanics at any service station will be able to do this quickly and correctly. If you decide to make the replacement yourself, then, first, you can follow a few simple steps in order to make sure that the pump is faulty. For example, check the pressure in the fuel system; if the readings are below normal, it means the pump does not provide the required level of pressure. To replace the pump, follow these steps:

  • remove the rear seat and unscrew the fuel pump cap;

  • disconnect all wires and tubes;

  • remove the fuel pump assembly;

  • disconnect the rubber pipe;
  • remove the old pump and install a new one;
  • reconnect the pipe, power terminals and lines.
  • screw the lid on.

Also, it is recommended that immediately after installing the new pump, do not install the seat, but start the engine and check the system for leaks. If a leak is discovered, it is necessary to check the tightness of all connections. When replacing the fuel pump, pay attention to the condition of the fuel filter - it is recommended to change it every 80-100 thousand kilometers.

The Toyota Camry V40 on the domestic market was officially supplied with gasoline engines with volumes of 2.4 and 3.5 liters. In terms of configuration and characteristics, it is most similar to the Camry, which is supplied to the US market.

The fuel system on the Camry 40 is designed the same as on most modern cars. Fine and coarse fuel filters are placed in a single module together with the pump and installed in the tank. The filter for the Toyota Camry v40 differs depending on the engine being installed. Moreover, this applies to both the fine filter and the mesh filter.

Fuel filter Toyota Camry v40 2.4

Original fuel filter 7702433060

On the Camry 40 2.4, a fuel filter with the article number is installed from the manufacturer 7702433060 . The average price of a part is 6,000 rubles. The manufacturer is not indicated, neither on the packaging nor on the part itself. Many drivers have noticed that the original filter is almost identical to what JS ASAKASHI makes, its number is FS6305. Therefore, many Camry 40 car owners agree that the above-mentioned filter is a direct analogue of the original. Among drivers, fuel filter FS6305 is much more popular than the original, primarily because its price is on average 2 times lower - 1300 rubles.

The filter mesh, installed from the factory, is not sold separately and is only assembled with the fuel pump. The most suitable and popular original part is the mesh from DEKO under the article 232170H070. Price – 600 rub. It also has another name - PT-25.

Fuel filter dimensions 7702433060 for Camry 40 2.4

Due to the excessive cost of the original fuel filter, substitutes are also in great demand among drivers. The most popular of them:

  • MFF-T110. Manufacturer: Masuma, Japan. Price - 1000 rub. This spare part is also popular among owners of the Camry v40 due to its low price and similar quality to the original;
  • ST 500. Manufacturer – SCT, Germany. Price – 1100 rub. This filter has similar quality to the original. Many drivers recommend installing it because of its reliability.

Fuel filter Masuma MFF-T110

Fuel filter SCT ST 500

Fuel filter Toyota Camry v40 3.5

On a Toyota Camry v40 with a 3.5 liter engine, a fuel filter with the article number is installed from the factory 2330021010 . Price – 1600 rub. As in the first case (with a 2.4 engine), there is no exact information about the manufacturer of this part.

Original fuel filter 2330021010

JS ASAKASHI also has an identical filter FS6300, which, according to most car owners, is a direct analogue of the original Toyota fuel filter 2330021010 . Filter price FS6300– 540 rub.

It is worth noting that there are counterfeits of the original Toyota fuel filter on sale. 2330021010 . The main distinguishing features of a counterfeit part:

  • poor processing of plastic edges of the part;
  • the shade of the fake is more yellowish;
  • there are no markings on the part itself;
  • differences in weight. Weight of the original (without packaging) – 232 g;
  • the usual arrangement of folds of the filter element. In the original, it is made in the form of an accordion, which increases the filtration area.

The mesh filter (coarse cleaning), which is installed by the manufacturer on the Camry 40 with a 3.5 engine, has article number 232170C010. Price – 450 rub. From detail 232170H070(which is installed on the Camry 40 2.4) is distinguished by a more elongated shape and the absence of a cutout.

Fuel filter dimensions 2330021010 for Camry 40 3.5

The most popular analogues of the original fuel filter 2330021010 are:

    MFF-T103. Manufacturer: MASUMA, Japan. Price - 520 rub. According to reviews from drivers who used this filter, there is no difference with the original. The dimensions are also almost completely identical to the original part;

While operating a Toyota Camry, car owners may notice that the engine has begun to run unevenly, fuel consumption has increased, and the car's power has noticeably decreased. This indicates a faulty fuel filter. The manufacturer recommends replacing the fuel filter Toyota Camry V50, V40, V30 at least once every 80-90 thousand kilometers. But in practice this has to be done more often, since the quality of fuel in our country leaves much to be desired.
The replacement procedure for Toyota Camry V30, V40, V50 is identical. Unlike older models, here the unit is located not under the hood, but in the bank itself. It can be accessed through a special hatch located in the car interior under the rear seat.

No one is immune from the use of low-quality fuel; it occurs everywhere. To eliminate the harmful effects on the engine of rust, metal chips and other impurities that may be found in the fuel, a fuel filter is installed. Its task is to retain small debris so that it does not get into the motor, as this will lead to breakdown and, as a result, to expensive repairs.

If a filter replacement is necessary before the deadline set by the manufacturer, drivers most often notice this. The car loses power, has difficulty starting, the engine is unstable, especially at low speeds, and may stall. This indicates that the filter has stopped performing its functions normally and needs to be replaced.

How often should I change

The Toyota Camry manufacturer sets the frequency of replacing the fuel filter for models V30, 40, 50 - at least once every 80 thousand km. This indicator is not accurate; it largely depends on the quality of the fuel that the car owner uses. You need to focus on it if your car has traveled the specified number of kilometers and the fuel filter is working properly. If it is not replaced, as recommended by the manufacturer, then the breakdown will not take long to happen and may happen at the wrong time.

Practice shows that Camry v50 fuel filter replacement, V40, V30 is needed more often - after 30 thousand km. Typically, at this mileage, signs of clogging will begin to appear. If this happens, you should contact a service station or replace the unit yourself, since the fuel filter has stopped working properly and may allow small debris to pass through, which threatens to damage the injection system and the engine as a whole.

Before changing the filter, you need to prepare the car and tools. After completing the procedure, be sure to check whether all parts are well secured and whether there is any undercutting from under the hose.

Precautionary measures

If you decide to carry out the procedure yourself, you need to study, for example, video of replacing the fuel filter Toyota Camry v40. Be sure to follow safety rules - when replacing, there may be a gasoline leak, an accumulation of fumes, which poses a risk of fire.

Before replacing you must:

  1. Drive the car out of the garage into the open air to prevent the accumulation of gasoline vapors.
  2. Remove sources of open flame, including turning off the power to the car by disconnecting the battery.
  3. Relieve pressure in the fuel system (just open the tank cap).
  4. Keep fire extinguishing agents on hand.

Next we proceed to replacing the fuel filter Toyota Camry 30. It is worth paying attention that it is recommended to buy high-quality spare parts recommended by the manufacturer, since only they guarantee reliable, long-term operation.

Replacement

The replacement process cannot be called complicated. Those who have practical repair experience will not have any difficulties. Before starting the procedure, you need to prepare the tools that may be needed:

  • a set of keys;
  • Phillips screwdriver;
  • brush.
  1. It is necessary to remove the rear seat sofa.

  2. Disconnect the terminal by pressing the tab and pulling it towards you.
  3. Take a brush and clean off any dust that may have accumulated under the lid.
  4. Disconnect the hose; to do this, just pry up the brackets with a screwdriver and move the stopper to the side.


  5. After this, the entire structure can be removed from the tank.

  6. Disconnect the wires.
  7. At the top of the structure there are several more latches that can be removed using a screwdriver.
  8. Remove the filter itself from the housing.

  9. Assemble all the parts for the new spare part and install it in place.
  10. Start the car.

Examination

After replacing the fuel filter Toyota Camry 40. 30 or 50, it is necessary to let the engine run a little. In this case, the engine may operate unstably, since air may have entered the system when replacing the filter. After a few minutes, the car is turned off and checked for gasoline leaks.

It will take no more than half an hour. This is a simple procedure that needs to be done regularly. If you do it yourself, you can save money and not contact a service station. Experts recommend replacing the fuel pump grid at the same time. This will extend the life of the new filter.