Bt134 600 connection diagram. Triacs bt134 - characteristics, pinout. There are also specific disadvantages

Rice. 1 Pinout of triac BT134

BT134 is available in a SOT-82 plastic housing. Triacs BT134 series are used in motor control circuits, in industrial and household lighting devices, in electric heating devices and other household appliances.

Designation system for triacs, thyristors, BT dinistors manufactured by Philips

1. VT - Philips triac

3. not designated for series 134, case type of triacs BT134 - SOT-82

4. Max. voltage, V

5. Control electrode unlocking current: not indicated – 35 mA, B – 50 mA, D – 5 mA, E – 10 mA, F – 25 mA

Main characteristics of triacs BT134

Parameter	Designation	Eat- face down	Triac type
Parameter	Designation	Eat- face down	BT134-500	BT134-600	BT134-800
Maximum reverse voltage	U arr.	IN	500	600	800
Max. repetitive pulse e.g. closed	U zs.repeat max.	IN	500	600	800
Max. average value of the current in the open state over the period	I os.avg.max.	A	4	4	4
Max. short-term pulse current in open state	I cr.max.	A	25	25	25
Lowest constant control current, necessary to turn on the triac	I u.ot.min.	A	0.025	0.025	0.025

A significant disadvantage of thyristors is that they are half-wave elements; accordingly, in alternating current circuits they operate at half power. You can get rid of this drawback by using a back-to-back circuit for connecting two devices of the same type or by installing a triac. Let's figure out what this semiconductor element is, the principle of its operation, features, as well as the scope of application and testing methods.

What is a triac?

This is one of the types of thyristors, which differs from the basic type in a large number of p-n junctions, and as a consequence of this, in the principle of operation (it will be described below). It is characteristic that in the element base of some countries this type is considered an independent semiconductor device. This minor confusion arose due to the registration of two patents for the same invention.

Description of the operating principle and device

The main difference between these elements and thyristors is the bidirectional conductivity of electric current. Essentially, these are two SCRs with common control, connected back-to-back (see A in Fig. 1).

Rice. 1. Circuit with two thyristors, as an equivalent of a triac, and its conventional graphic designation

This gave the name to the semiconductor device, as a derivative of the phrase “symmetrical thyristors” and was reflected in its UGO. Let us pay attention to the designations of the terminals, since current can be carried in both directions, the designation of the power terminals as Anode and Cathode does not make sense, therefore they are usually designated as “T1” and “T2” (options TE1 and TE2 or A1 and A2 are possible). The control electrode is usually designated “G” (from the English gate).

Now consider the structure of the semiconductor (see Fig. 2.) As can be seen from the diagram, there are five junctions in the device, which allows you to organize two structures: p1-n2-p2-n3 and p2-n2-p1-n1, which, in fact, are two counter-current thyristors connected in parallel.

Rice. 2. Block diagram of a triac

When negative polarity is formed at the power terminal T1, the trinistor effect begins to manifest itself in p2-n2-p1-n1, and when it changes, p1-n2-p2-n3.

Concluding the section on the principle of operation, we present the current-voltage characteristics and the main characteristics of the device.

Designation:

A – closed state.
B – open state.
U DRM (U PR) – maximum permissible voltage level for direct connection.
U RRM (U OB) – maximum reverse voltage level.
I DRM (I PR) – permissible direct current level
I RRM (I OB) – permissible level of reverse switching current.
I N (I UD) – holding current values.

Peculiarities

To have a complete understanding of symmetrical thyristors, it is necessary to talk about their strengths and weaknesses. The first include the following factors:

relatively low cost of devices;
long service life;
lack of mechanics (that is, moving contacts that are sources of interference).

The disadvantages of the devices include the following features:

The need for heat removal is approximately at the rate of 1-1.5 W per 1 A, for example, at a current of 15 A, the power dissipation value will be about 10-22 W, which will require an appropriate radiator. For ease of fastening to it for powerful devices, one of the terminals has a thread for a nut.

Devices are subject to transients, noise and interference;
High switching frequencies are not supported.

The last two points require a little clarification. In the case of high switching speed, there is a high probability of spontaneous activation of the device. Interference in the form of a voltage surge can also lead to this result. To protect against interference, it is recommended to bypass the device with an RC circuit.

In addition, it is recommended to minimize the length of the wires leading to the controlled output, or alternatively use shielded conductors. It is also practiced to install a shunt resistor between the T1 terminal (TE1 or A1) and the control electrode.

Application

This type of semiconductor elements was originally intended for use in the manufacturing sector, for example, to control electric motors of machine tools or other devices where continuously variable current control is required. Subsequently, when the technical base made it possible to significantly reduce the size of semiconductors, the scope of application of symmetrical thyristors expanded significantly. Today, these devices are used not only in industrial equipment, but also in many household appliances, for example:

chargers for car batteries;
household compressor equipment;
various types of electric heating devices, ranging from electric ovens to microwaves;
hand-held electric tools (screwdriver, hammer drill, etc.).

And this is not a complete list.

At one time, simple electronic devices were popular that allowed smooth adjustment of lighting levels. Unfortunately, dimmers based on symmetrical thyristors cannot control energy-saving and LED lamps, so these devices are not relevant now.

How to check the functionality of a triac?

You can find several methods online that describe the testing process using a multimeter; those who described them, apparently, have not tried any of the options themselves. In order not to be misleading, you should immediately note that testing with a multimeter will not be possible, since there is not enough current to open the symmetrical SCR. Therefore, we are left with two options:

Use a pointer ohmmeter or tester (their current strength will be sufficient to trigger).
Collect a special circuit.

Algorithm for checking with an ohmmeter:

We connect the probes of the device to terminals T1 and T2 (A1 and A2).
Set the multiplicity on the ohmmeter x1.
We carry out a measurement, a positive result will be infinite resistance, otherwise the part is “broken” and can be gotten rid of.
We continue testing, to do this we briefly connect pins T2 and G (control). The resistance should drop to about 20-80 ohms.
Change the polarity and repeat the test from steps 3 to 4.

If during the test the result is the same as described in the algorithm, then with a high probability it can be stated that the device is operational.

Note that the part being tested does not have to be dismantled; it is enough to just turn off the control output (naturally, having first de-energized the equipment where the part that raises doubt is installed).

It should be noted that this method does not always allow reliable testing, with the exception of testing for “breakdown”, so let’s move on to the second option and propose two circuits for testing symmetrical thyristors.

We will not give a circuit with a light bulb and a battery in view of the fact that there are enough such circuits on the network. If you are interested in this option, you can look at it in the publication on testing thyristors. Let's give an example of a more effective device.

Designations:

Resistor R1 – 51 Ohm.
Capacitors C1 and C2 – 1000 µF x 16 V.
Diodes - 1N4007 or equivalent, installation of a diode bridge, for example KTs405, is allowed.
HL bulb – 12 V, 0.5 A.

You can use any transformer with two independent 12 Volt secondary windings.

Verification algorithm:

Set the switches to their original position (corresponding to the diagram).
We press SB1, the device under test opens, as indicated by the light bulb.
Press SB2, the lamp goes out (the device is closed).
We change the mode of the SA1 switch and repeat pressing SB1, the lamp should light up again.
We switch SA2, press SB1, then change the position of SA2 again and press SB1 again. The indicator will turn on when the shutter hits minus.

Now let's look at another scheme, only universal, but also not particularly complicated.

Designations:

Resistors: R1, R2 and R4 – 470 Ohm; R3 and R5 – 1 kOhm.
Capacities: C1 and C2 – 100 µF x 10 V.
Diodes: VD1, VD2, VD5 and VD6 – 2N4148; VD2 and VD3 – AL307.

A 9V battery, Krona type, is used as a power source.

Testing of SCRs is carried out as follows:

Switch S3 is moved to the position as shown in the diagram (see Fig. 6).
Briefly press button S2, the element under test will open, which will be signaled by the VD LED
We change the polarity by setting switch S3 to the middle position (the power is turned off and the LED goes out), then to the bottom.
Briefly press S2, the LEDs should not light up.

If the result corresponds to the above, then everything is in order with the tested element.

Now let's look at how to check symmetrical thyristors using the assembled circuit:

We carry out steps 1-4.
Press the S1 button - the VD LED lights up

That is, when you press the S1 or S2 buttons, the VD1 or VD4 LEDs will light up, depending on the set polarity (the position of the S3 switch).

Soldering iron power control circuit

In conclusion, we present a simple circuit that allows you to control the power of the soldering iron.

Designations:

Resistors: R1 – 100 Ohm, R2 – 3.3 kOhm, R3 – 20 kOhm, R4 – 1 Mohm.
Capacitances: C1 – 0.1 µF x 400V, C2 and C3 – 0.05 µF.
Symmetrical thyristor BTA41-600.

The above diagram is so simple that it does not require configuration.

Now let's look at a more elegant option for controlling the power of a soldering iron.

Designations:

Resistors: R1 – 680 Ohm, R2 – 1.4 kOhm, R3 – 1.2 kOhm, R4 and R5 – 20 kOhm (dual variable resistance).
Capacitances: C1 and C2 – 1 µF x 16 V.
Symmetrical thyristor: VS1 – VT136.
DA1 phase regulator microcircuit – KP1182 PM1.

Setting up the circuit comes down to selecting the following resistances:

R2 – with its help we set the minimum temperature of the soldering iron required for operation.
R3 – resistor value allows you to set the temperature of the soldering iron when it is on the stand (switch SA1 is activated),

Devices that operate on electrical current can be configured without problems. Of course, taking into account if the device already has such an opportunity. But even if it is not there, you can do it yourself by installing a thyristor or triac power regulator. The most common voltage regulation circuit is BT136 600e.

Advantages and disadvantages

Today, triac regulators are beginning to lead in sales in the specialized market. Unlike thyristors, triacs are double-acting because they have a cathode and an anode. This allows you to change the direction of the current during operation.

It is worth noting that replacing them with contactors, relays or starters is impractical. This is due to the durability of the triac, as well as many other positive qualities of such a device. Once installed on the circuit, it will almost never fail. Also a positive point can be considered the complete absence of spark during operation. Circuits based on triacs were analyzed, which were significantly cheaper in cost than analogues based on transistors and microcircuits.

Thus, the use of triacs has a number of significant advantages:

long service life (parts practically do not wear out);
the price of the device is low;
During operation, mechanical contacts can be avoided.

This is not the entire list of benefits. There are some models that boast certain features.

There are also specific disadvantages:

extraneous interference and noise;
the device is highly sensitive to transient processes;
to avoid overheating, the device is installed in a radiator;
use at high frequencies is not possible.

Purposes of application

The triac voltage regulator has its own characteristics of use. Such devices come in different capacities and, depending on this, can be used to operate a particular device.

Triacs are actively used in the following types of household appliances:

If we talk about the types of triac regulators, then they are united by one characteristic - they all work on a similar principle. The only difference between them is their power. There are types of triacs that need to be especially carefully adjusted when setting up control signals. Management varies among species. This could be a simple design using several capacitors and resistors, or it could be a complex circuit with a microcontroller.

Self-production

Today it is possible to install simple regulators on electrical appliances with your own hands, if you have the necessary tools and circuits. There are several possible options for such schemes. One of the schemes includes the bt136 600e. It is ideal, for example, for adjusting the heating level of a soldering iron.

Scheme options

The soldering iron can be equipped with a device for adjusting power up to 90 W. To do this, you only need a few details. It is thanks to this device that you can change not only the degree of heating of the soldering iron tip, but also the level of glow of a table lamp, the fan speed for many other devices that require adjustment.

Such a regulator can be assembled based on many triacs, for example, VTA 16600. But the ideal option would be to use the bt136 600e device. A triac of this type is better suited for adjusting the power of a soldering iron tip.

A characteristic feature of a device like BTA 16600 is the presence of a neon lamp in the circuit. It serves as an indicator of current power and can be a convenient option for many devices.

On the other hand, if you have minimal experience working with microcircuits, then you can install such a lamp in a power regulator circuit based on a triac such as bt136 600e. The main thing is to choose the right neon lamp. The quality of operation of the regulator, its functionality and much more will depend on the correct choice of such a device. It must have minimum voltage levels.

The smoothness of adjustment of the degree of heating of the soldering iron tip or fan speed directly depends on this indicator. When installing the starter in a lamp, a neon lamp does not need to be used. Although this reduces the functionality of the device, since the voltage (power) indicator of the device will not be visible during operation.

There is nothing complicated in the regulator circuits for a soldering iron. To create a diode bridge, D226 diodes are used. The KY202H thyristor must be mounted to it. He has a personal chain of command. If the device’s power adjustment range should be quite large, then circuits with the additional installation of a logic element - the K561NE8 counter - are used. The thyristor will also regulate the power here.

After installing the diode bridge, according to the diagram, a conventional parametric stabilizer follows. It will turn on the supply of electricity to the chip. It is also important to choose the right power and number of diodes. They must correspond to the desired adjustment range.

There is another circuit option for adjusting the power of the soldering iron. It is very simple, there are no expensive or scarce parts in it. By pre-setting the LED, you can adjust the on/off state.

The possible permissible input voltage should be from 120 to 210 volts. For any devices of this type, you can use a voltage indicator. Such a device can be found in an old tape recorder and used for personal purposes. To improve the device, you can use an LED or any other components of this type. It will highlight the device's voltage scale, as well as the on or off state. This will significantly increase its functionality.

Assembling the device

When assembling a triac or thyristor power regulator with your own hands, you should take care of a high-quality housing for the device. The best option is to use plastic as it is easy to bend, cut, glue and generally process. Thus, you need to cut out blanks from plastic, clean and process the edges, and then glue them together in the shape of a box for the device. The made regulator is mounted in the box. After the device is assembled, it must first be checked for correctness of the circuit and for operability before operation.

In order to perform such a check, you can use a regular soldering iron. An alternative is to use a multimeter. The devices just need to be connected to the output of the control circuit itself and turn the regulator knob. If the circuit has a test light, then when adjusting, the brightness of its light should change.

Some nuances for setting up

There are also more powerful regulators, in which at constant voltage the indicator will be 450-500 W, and at alternating current - 220 volts. They are installed on devices that require such a load. These include fans, grinders, hammer drills, etc.

In such devices, the triac will serve as a phase regulator. The power range must be appropriate. The main functional responsibility will be the moment the triac is turned on, switching it to a higher or lower load when it passes through zero.

By default, the triac is in the closed position. As the voltage increases, the capacitors are charged, which is divided into two directions. This process will occur until it is charged to 32 V in total in two directions. After this, the triac and dinistor open. The first will be open for the entire half-term. Because of this principle of operation, the power of any device is adjusted in practice.

Using a thyristor

Using a voltage regulator such as a thyristor allows you to smoothly adjust, for example, a soldering iron from half the possible voltage to the maximum. If the circuit is improved and a diode bridge is added, then adjustment can be made from 0 to 100%.

The principle of assembling the regulator on a triac is very similar to that used in a thyristor device. This method is applicable to the assembly of any device of this type.

The assembly of a thyristor regulator on a printed circuit board looks like this:

First you need to prepare a wiring diagram. To do this, mark the circuit itself on the starting board using a nail or needle. It should be located in a convenient way. If this is difficult for a novice master to do, then you can purchase a board with a ready-made circuit.
Preparation of all required materials and tools. These include a printed circuit board. You can make it yourself or buy it. You should also prepare a knife, wire cutters, soldering iron, solder, wire flux, etc.
Next you need to install all the parts according to the pre-prepared diagram.
The excess ends of all parts must be removed using wire cutters.
After this comes the soldering stage. First, all parts are made with flux, then soldered in the following sequence: capacitors with resistors, transistors, thyristors, diodes, dinistors.
The next stage is preparing the case for assembly.
Cleaning and sealing contacts.
Wire insulation.
Check before use.
Final assembly.

A thyristor with low power does not have large dimensions, so it is very convenient to use. The special characteristics of this device include increased sensitivity.

To control the device, a capacitor with a resistor is installed. It can be applied to devices whose total power does not exceed 40 watts. It is possible to adjust the power from minimum to maximum.

Price categories

Today there are many modern manufacturers on the market that offer products of different quality and price. You need to carefully select the device depending on the result you want to get.

Among the many proposals, you need to pay attention to the following characteristics:

Thus, assembling a thyristor or triac power regulator will not be difficult even for novice craftsmen. A more difficult task will be to master the rules of its operation. It remains very important that all the above rules and assembly instructions are taken into account. This will make it possible to make a higher-quality device that will work smoothly and efficiently, as well as benefit its owner.

In electronic circuits of various devices, semiconductor devices - triacs - are often used. They are used, as a rule, when assembling regulator circuits. If an electrical appliance malfunctions, it may be necessary to check the triac. How to do it?

Why is verification needed?

In the process of repairing or assembling a new circuit, it is impossible to do without electrical parts. One of these parts is a triac. It is used in alarm circuits, light controllers, radio devices and many branches of technology. Sometimes it is reused after dismantling non-working circuits, and it is not uncommon to encounter an element whose markings have been lost due to long-term use or storage. It happens that new parts need to be checked.

How can you be sure that the triac installed in the circuit is really working, and in the future you will not need to spend a lot of time debugging the operation of the assembled system?

To do this, you need to know how to test a triac with a multimeter or tester. But first you need to understand what this part is and how it works in electrical circuits.

In fact, a triac is a type of thyristor. The name is made up of these two words - “symmetrical” and “thyristor”.

Types of thyristors

Thyristors are usually called a group of semiconductor devices (triodes) capable of passing or not passing electric current in a given mode and at certain periods of time. This creates conditions for the circuit to operate in accordance with its functions.

The operation of thyristors is controlled in two ways:

by applying a voltage of a certain value to open or close the device, as in dinistors (diode thyristors) - two-electrode devices;
by applying a current pulse of a certain duration or magnitude to the control electrode, as in thyristors and triacs (triode thyristors) - three-electrode devices.

Based on the principle of operation, these devices are divided into three types.

The dinistors open when the voltage reaches a certain value between the cathode and the anode and remain open until the voltage decreases again to the set value. When open, they operate on the principle of a diode, passing current in one direction.

SCRs open when current is applied to the control electrode contact and remain open when there is a positive potential difference between the cathode and anode. That is, they are open as long as there is voltage in the circuit. This is ensured by the presence of a current whose strength is not lower than one of the parameters of the thyristor - the holding current. When open, they also operate on the principle of a diode.

Triacs are a type of thyristors that pass current in two directions when in the open state. In essence, they represent a five-layer thyristor.

Lockable thyristors are SCRs and triacs that close when a current of opposite polarity is applied to the control electrode contact than the one that caused it to open.

Using a tester

Checking the functionality of a triac with a multimeter or tester is based on knowledge of the operating principle of this device. Of course, it will not give a complete picture of the condition of the part, since it is impossible to determine the performance characteristics of the triac without assembling the electrical circuit and taking additional measurements. But often it will be enough to confirm or refute the functionality of the semiconductor junction and its control.

To check the part, you need to use a multimeter in resistance measurement mode, that is, as an ohmmeter. The contacts of the multimeter are connected to the working contacts of the triac, and the resistance value should tend to infinity, that is, be very large.

After this, the anode is connected to the control electrode. The triac should open and the resistance should drop to almost zero. If this is what happened, most likely the triac is operational.

When the contact with the control electrode is broken, the triac should remain open, but the parameters of the multimeter may not be enough to provide the so-called holding current, at which the device remains conductive.

The device can be considered faulty in two cases. If, before voltage appears at the contact of the control electrode, the resistance of the triac is negligible. And the second case, if when voltage appears at the contact of the control electrode, the resistance of the device does not decrease.

Using a battery and a light bulb

There is an option to test a triac with a simple tester, which is an open single-line circuit with a power source and a test lamp. You will also need an additional power source for testing. Any battery can be used as it, for example type AA with a voltage of 1.5 V.

The details must be called in a certain order. First of all, it is necessary to connect the contacts of the tester with the working contacts of the triac. The control lamp should not light up.

Then it is necessary to apply voltage between the control and working electrodes from an additional power source. The working electrode is supplied with a polarity corresponding to the polarity of the connected tester. When connected, the indicator lamp should light up. If the triac transition is configured for the appropriate holding current, then the lamp should light even when the additional power source is disconnected from the control electrode until the tester is turned off.

Since the device must pass current in both directions, for reliability, you can repeat the test by changing the polarity of connecting the tester to the triac to the opposite one. It is necessary to check the functionality of the device when the current flows in the opposite direction through the semiconductor junction.

If, before applying voltage to the control electrode, the control lamp lights up and continues to light, then the part is faulty. If the control lamp does not light up when voltage is applied, the triac is also considered faulty, and it is not advisable to use it in the future.

A triac mounted on a board can be checked without desoldering it. To check, you only need to disconnect the control electrode and de-energize the entire circuit, disconnecting it from the working power source.

By following these simple rules, you can reject low-quality or worn-out parts.