Ground clearance in Renault Logan. What is the ground clearance of the Renault Logan? What is the ground clearance of the new Renault Logan
In 1998, the French automobile concern Renault opened a new project to create an inexpensive family-type sedan. The finished model was presented to the public in 2004. Serial production of the car under the designation L90 began in Romania at the Dacia plant. A year later, the assembly of Renault Logan was established on the assembly line of the Moscow AvtoFramos plant, and in 2007 the car began to be assembled at Mahindra & Renault in the Indian city of Nashik. were determined taking into account the characteristics of the region where the vehicle was used, for example, for Brazil, an engine with a volume of only 1 liter and a power of 70 hp was installed, but it could run on low-octane gasoline and ethyl alcohol. The engines of Renault Logan cars supplied to the Russian market comply with Euro-3 and Euro-4 standards, their volume is 1.6 liters with a power of 105 hp, high-octane fuel is required for such engines.
Economy class car
At the 2012 autumn motor show in Paris, a presentation of the new Renault Logan with sedan and Sandero hatchback body styles took place. Finally, in April 2013, a station wagon version was presented in Geneva. On the Renault Logan project, the developers worked on the latest methods of computer design of components and parts; cutting-edge technologies allowed them to save about 20 million euros. Manufacturers of units, body components and the power plant along with the transmission were tasked with bringing the Renault Logan project to a cost within 5,000 euros. The machine was initially aimed at sales and operation in third world countries. The share of manual labor in car production was assumed to be high, since automatic assembly lines are much more expensive.
Clearance is one of the main problems
Taking into account the prospect of driving on Russian roads, the ground clearance was calculated to be within 155 mm, while the European version is only 135-140 mm. However, when purchasing a car, Russian buyers unanimously said that it was low. Indeed, most cars designed for operation in Russia have a ground clearance of 170 mm, and even this figure does not always correspond to operating conditions on Russian roads. Recently, a paradoxical situation has arisen in the Russian automobile market: manufacturers of passenger vehicles are trying to reduce ground clearance in order to lower the center of gravity and increase the stability of the car, and it is becoming increasingly difficult to drive such a car. The reason is bad roads, uneven roads, potholes, bumps. The question of what ground clearance the Renault Logan has is quite relevant. The driver is constantly faced with the problem of low landing of his car. And since any problem requires its own solution, we have to look for ways to increase ground clearance in order to ensure that the engine sump, lower shock absorber brackets and other protruding parts of the chassis cling less to road unevenness.
Ground clearance and wheels
If we talk about increasing the vehicle's ground clearance on our own, there are several ways to do this. To raise the car up to one and a half centimeters, it is enough to replace the factory standard tires with high-radial ones. For example, tires 195/65R14 to 195/70R14. thus will increase, although only slightly. You can do something more radical and install R15 wheels on the car. In this case, the ground clearance of the Renault Logan will increase significantly, but this is possible if the wheel arches allow the rotation of a larger wheel without touching, rubbing and other related phenomena. Therefore, you also need to select wheels by width. You should also monitor how the new wheel fits into the arch of the niche when turning. In addition, you need to keep in mind that when installing R15 wheels, errors in the speedometer are inevitable.
Spacers
The technical characteristics of the Renault Logan, the ground clearance of which needs to be increased, allow some changes to be made. In order to raise the car higher, constructive methods are used to increase ground clearance. One of them is the installation of so-called spacers in the rack spring socket. These are structurally simple products that follow the radial contour of the rack, made of aluminum. The spacers come with a set of installation bolts. The height of such a spacer is 20-25 mm, which, together with new wheels, allows you to achieve a significant increase in the vehicle's ground clearance. To install the spacer, you need to slightly raise the front of the car with a jack, loosen the central nut and tighten the spring with zip ties. After this, dismantle the rack and knock out the standard mounting bolts. Then press in new longer bolts and install the spacer. As a result, the Renault Logan's ground clearance will rise by 25 mm. The rear part is raised in a similar way, but a rubber spacer is used. Of course, before inserting these parts, they need to be selected correctly. There are many spacers available in different sizes and made from different materials. It is important to ensure full compliance of the parameters of the new parts and the seat.
Ground clearance and turns
Often, ground clearance decreases due to the natural shrinkage of shock-absorbing springs, which occurs due to the constant high load of the trunk and interior. In this case, it is necessary to replace the springs with new ones. In this case, you can take advantage of the situation and install reinforced springs of a cargo standard in place of the old ones, which will be more consistent with the operating conditions of the vehicle. An independent increase in the Renault Logan's ground clearance within a small range, 15-30 mm, will not entail any negative consequences, except for errors in the speedometer readings.
Center of gravity
However, when the ground clearance increases by 30 mm or more, you need to be prepared for the fact that it will become more difficult to drive the car. Since the center of gravity has become higher than the design point and the balance of the entire chassis has already been disrupted to some extent, sharp turns and bends will have to be avoided, as they can be dangerous. Before increasing the ground clearance of the Renault Logan, it is necessary to determine the optimal values of the expected ground clearance and only then begin work.
Dimensions of the new Renault Logan have not changed significantly, but the length of the new body is longer. The wheelbase has also increased, although only by 4 mm. The luggage compartment remains just as roomy. The ground clearance or ground clearance of the new Renault Logan is still 15 and a half centimeters.
We offer compare the main dimensions of the old and new Logan body second generation. To begin with, you can compare those parameters that still coincide. So the ground clearance for both versions of the budget sedan is 155 mm, the luggage compartment volume is 510 liters, and the gas tank volume is 50 liters. All other indicators have changed at least slightly.
So, the length of the new Logan is 4346 mm, in the old version it is 4288 mm. The wheelbase, which determines the spaciousness in the cabin, is 2643 mm, versus 2630 mm in the old sedan body. The height and width of the updated car are 1517 and 1733 mm; in the old version of Logan these figures are slightly more than 1534 and 1740 mm.
Dimensions, weight, volumes, ground clearance of the new Renault Logan 2
- Length – 4346 mm
- Width – 1733 mm
- Height – 1517 mm
- Front track – 1497 mm
- Rear track – 1486 mm
- Curb weight – 1106 kg with 1.6 liter engine (8-cl.)
- Curb weight – 1127 kg with a 1.6 liter engine (16 liters)
- Gross weight – 1545 kg with a 1.6 liter engine (8-cl.)
- Gross weight – 1566 kg with a 1.6 liter engine (16 liters)
- Base, distance between front and rear axle – 2634 mm
- Renault Logan trunk volume – 510 liters
- Fuel tank volume – 50 liters
- Tire size – 185/65 R 15
- Ground clearance or clearance of Renault Logan - 155 mm
Dimensions Renault Logan 2014-2015 model year are fully consistent with the “B” class. There is one big problem with such cars: there is quite a bit of space in the back row of seats. The dimensions of the car do not allow for a sufficiently spacious interior. Therefore, before buying a Logan in a new body, seriously think about whether there is enough space for you and your family in this sedan. If the family is small, and family members are not very demanding about comfort and large living space around, then Renault Logan is an ideal choice. This choice is supported not only by the price, but also by the latest serious modernization, which turned the “ugly” budget car into a decent and modern car.
The ground clearance of the Renault Logan, a popular car from France on the domestic market, is perhaps one of the most significant indicators of a car that is used in harsh Russian conditions.
Why increase ground clearance
Initially, Renault Logan models, both 2008 and 2014, are produced by the manufacturer with a fairly impressive ground clearance, but, as practice shows, such ground clearance is insufficient, for example, for Renault Logan 2 it is only 155 mm. Experienced car owners make all sorts of modifications that help increase the ground clearance of the “iron horse”.
As practice shows, the most popular and sought-after method to increase ground clearance is to install all sorts of specialized spacers, which can significantly increase ground clearance. There are currently many video reviews about this on the Internet. Everyone knows that Russian roads sometimes leave much to be desired, and you constantly have to overcome various obstacles, and every driver worries about his car, wanting to overcome the roads easily, without fear for the car, so everyone strives to increase the ground clearance. And it doesn’t matter what ground clearance the Renault Logan car has, it doesn’t matter; in most cases, the owners increase it.
How to increase ground clearance:
- Perhaps one of the most popular methods for increasing clearance has been the installation of non-original shock absorber springs. The installation carries several significant advantages at once - this is when the replacement of a part is carried out as a result of its significant wear, which negatively affects the clearance. Replacing springs in no way negatively affects the stability and controllability of Renault Logan 2 directly from 2016 and earlier years of production. But some other decisions can be harmful.
- Another way is to replace the rims with several sizes larger. Let us immediately note that this may negatively affect fuel consumption and the behavior of the car, but it will allow a slight increase in ground clearance. There are many examples of increasing the lumen in this way, and there are many thematic videos.
- To get an effective, but short-term effect, you can replace the rubber elements under the shock absorbers. The effect of the procedure will be short-lived, but noticeable. This option for increasing the clearance is good because every car owner can do it independently, without making any investments.
- Over the past few years, supplies for interturn shock absorbers have become widespread. This method of increasing ground clearance on the French Renault Logan is effective and efficient. Whatever the ground clearance, you can always increase it yourself.
Installing such elements can sometimes improve the performance of shock absorbers, which will have a positive effect on the handling of the car.
However, there are no downsides. Each conversion has a short service life due to the use of polyurethane, which wears out quickly. Installing spacers on a Renault Logan car of any generation is quite feasible with your own hands.
- If you use high profile tires, you will definitely get a 20mm increase in clearance. What is the ground clearance of the Renault Logan model of any generation? 155mm, so plus 20mm is very noticeable. As a result of the increased ground clearance, there is no deterioration in the characteristics of the car, and no deviations in behavior are observed, and thus, this method is the most effective and simple, since replacing tires should not be a problem for each car owner.
- Installing specialized spacers on the support struts of a Renault Logan 2 car is the most common and most dramatic method of increasing ground clearance. This method is good because the effect of growth can reach plus 30mm, but in this case there are also disadvantages. Increasing the clearance has a negative impact on the car’s handling, since as the height of the “iron horse” increases, behavior on the road worsens. This method was more suitable for those car owners who drive most of the time on poor road surfaces.
Experienced specialists recommend that drivers contact services when installing spacers, since this process must be competent and responsible, and it will be very problematic for an ordinary car enthusiast to carry out the installation without special skills and knowledge.
Let's sum it up
As we understand from the article, there are several completely different ways to increase the clearance on Logan. All methods differ in cost, time-consuming and labor-intensive, but they are all united by the main task - to increase the clearance of the car. An ordinary car owner must understand for himself which method is preferable.
Renault Logan ground clearance is one of the most significant indicators for cars operating in the harsh conditions of Russian reality.
Reasons for making improvements
When released from the assembly line, Renault models initially have impressive ground clearance, but in many cases this indicator is not enough. Often, experienced car owners resort to various kinds of modifications to increase the ground clearance of the Renault Logan.
Among the most popular, which have become more widespread in practice and shown in various videos on the Internet, is the installation of various spacers that allow you to increase, sometimes significantly, the ground clearance of the Renault Logan. Indeed, in the difficult conditions of Russian off-road conditions, the main question for the driver, first of all, remains what ground clearance he has and whether he can overcome this or that obstacle without consequences for the car.
The main ways to increase ground clearance:
- One of the most common ways to increase clearance is to install different shock absorber springs. This operation has several advantages: replacing this Renault Logan part occurs as a result of wear, which negatively affects ground clearance. Also, this solution does not in any way affect, unlike other solutions, the controllability and stability of the machine.
- Replacing wheel rims with a larger diameter. This may have a negative impact on fuel efficiency, as well as on the behavior of the car, but it will increase the Renault Logan's clearance by a few millimeters. Examples of increasing clearance in this way are quite common, and can be seen among many videos.
- To obtain a short-term but effective effect, you can also replace the rubber elements under the shock absorbers. The effect will be noticeable, but short-lived. This option is good because any car enthusiast can carry out this procedure independently and without significant investment.
- Interturn spacers for Renault Logan shock absorbers have recently become widespread on the market. This method is quite effective for effectively increasing the vehicle's ground clearance.
Also, installing these elements can to some extent improve the characteristics of the shock absorbers themselves, which will have a positive effect on the handling of the car.
However, the disadvantage of these transformations is the relative fragility of these elements, due to the use of polyurethane, which is subject to increased wear. Installing these spacers is not very difficult, although it is quite labor-intensive.
- Use of higher profile rubber. Along with the effect of new tires, it is quite possible to get an increase in clearance of up to 20 millimeters, which is a significant figure in comparison with the total ground clearance of 165 millimeters. As a result of an increase in ground clearance in this way, there is no deterioration in any characteristics of the car or deviations in its behavior, thus this method is one of the most effective, especially since almost all car enthusiasts are able to replace tires.
- The most widespread and one of the most radical ways to solve the problem with Renault Logan ground clearance is to install special spacers on the car's support struts. This method is notable for the most noticeable effect; the increase in ground clearance can reach 30 millimeters, however, there are some disadvantages here too. Increasing the ground clearance in this case affects the car's handling for the worse, since as the car's height increases, the behavior on the road surface worsens. This method is most suitable for motorists who spend most of their time overcoming various road surface defects.
Experienced auto mechanics advise that when installing spacers, contact specialized services, since this process carries a lot of responsibility, and installation without the appropriate special knowledge will be quite problematic for an ordinary car enthusiast.
Summarizing
As a result, there are many ways to increase Logan clearance. The methods vary in labor intensity, energy consumption and cost, but they all cope with their main task - increasing the vehicle's ground clearance. The average car enthusiast can only answer the question of which method is preferable for him.
The 2nd generation Renault Logan budget sedan (sales began in Russia in 2014) is built on the B0 platform, which is used by several Renault-Nissan models. The car has a classic suspension design with front MacPherson struts and a rear torsion beam. At the same time, in the initial versions of the car there is no anti-roll bar.
The range of power units is represented by three petrol engines. Two of them were available from the start of sales of the model - the 1.6-liter eight-valve K7M (82 hp, 134 Nm) and the 1.6-liter sixteen-valve K4M (102 hp, 145 Nm). In June 2016, a 113-horsepower H4M engine with the same displacement of 1.6 liters was added to the pair of existing units. The assembly of the new gasoline “four” has been established at the plant in Tolyatti, and the engine itself, in addition to Logan, is installed on, and.
The sedan is equipped with three transmission options: a 5-speed manual transmission, a 5-speed Easy’R robotic gearbox and a 4-speed automatic transmission. The manual transmission is adapted to work with all three engines, the manual transmission is combined only with an 82-horsepower unit, and the automatic transmission works only in tandem with a 102-horsepower engine.
The Renault Logan 1.6 102 hp modification has the best dynamic characteristics. with 5 manual transmission. According to the parameters declared by the manufacturer, it accelerates to 100 km/h in 10.5 seconds. The least efficient version is with an 82-horsepower engine and a “robot”. A five-door equipped with such equipment reaches “hundreds” in 12.5 seconds.
The fuel consumption of Renault Logan 2 in most cases falls within 8-9 liters. The new 113-horsepower engine saves the best fuel, consuming an average of about 6.6 liters per 100 km.
Full technical specifications of Renault Logan 2 – summary table:
| Parameter | Renault Logan 1.6 82 hp | Renault Logan 1.6 102 hp | Renault Logan 1.6 113 hp | ||
|---|---|---|---|---|---|
| Engine | |||||
| Engine code | K7M | K4M | H4M | ||
| engine's type | petrol | ||||
| Injection type | distributed | ||||
| Supercharging | No | ||||
| Number of cylinders | 4 | ||||
| Cylinder arrangement | in-line | ||||
| Number of valves per cylinder | 2 | 4 | |||
| Volume, cubic cm. | 1598 | 1598 | 1598 | ||
| Piston diameter/stroke, mm | 79.5 x 80.5 | 78 x 83.6 | |||
| Power, hp (at rpm) | 82 (5000) | 102 (5750) | 113 (5500) | ||
| Torque, N*m (at rpm) | 134 (2800) | 145 (3750) | 152 (4000) | ||
| Transmission | |||||
| Drive unit | front | ||||
| Transmission | 5 manual transmission | 5 manual transmission | 6 manual transmission | 4 automatic transmission | 5 manual transmission |
| Suspension | |||||
| Front suspension type | independent, McPherson | ||||
| Rear suspension type | semi-dependent | ||||
| Brake system | |||||
| Front brakes | disk | ||||
| Rear brakes | drums | ||||
| Steering | |||||
| Amplifier type | hydraulic | ||||
| Tires and wheels | |||||
| Tire size | 185/65 R15 | ||||
| Fuel | |||||
| Fuel type | AI-95 | ||||
| Environmental class | Euro 5 | ||||
| Tank volume, l | 50 | ||||
| Fuel consumption | |||||
| Urban cycle, l/100 km | 9.8 | 9.0 | 9.4 | 10.9 | 8.5 |
| Extra-urban cycle, l/100 km | 5.8 | 5.7 | 5.8 | 6.7 | 5.6 |
| Combined cycle, l/100 km | 7.2 | 6.9 | 7.1 | 8.4 | 6.6 |
| dimensions | |||||
| Number of seats | 5 | ||||
| Number of doors | 4 | ||||
| Length, mm | 4346 | ||||
| Width, mm | 1733 | ||||
| Height, mm | 1517 | ||||
| Wheelbase, mm | 2634 | ||||
| Front wheel track, mm | 1497 | ||||
| Rear wheel track, mm | 1486 | ||||
| Trunk volume, l | 510 | ||||
| Ground clearance (clearance), mm | 155 | ||||
| Weight | |||||
| Curb, kg | 1106 | 1126 | 1140 | 1177 | 1125 |
| Full, kg | 1545 | 1550 | 1545 | 1600 | 1550 |
| Maximum trailer weight (equipped with brakes), kg | 1090 | ||||
| Maximum trailer weight (not equipped with brakes), kg | 550 | 560 | 570 | 585 | 790 |
| Dynamic characteristics | |||||
| Maximum speed, km/h | 172 | 164 | 180 | 171 | 177 |
| Acceleration time to 100 km/h, s | 11.9 | 12.4 | 10.5 | 11.7 | 10.7 |