Is it possible to turn on the air conditioner without the remote control? Air conditioner operating modes. Air conditioner operating instructions. “I take it because everyone takes it”

Today, with the variety of brands and models of air conditioners, it can be difficult to immediately find one that suits you. Sellers praise their goods. Their split systems are, of course, the best. Manufacturers highlight their brands in every possible way by adding new functions and modes. And for the buyer, the operating modes of the air conditioner that he will use are important.

How is knowledge of modes useful?

The article does not give advice on how to calculate the power of the air conditioner for your room, where to install a split system, or how to check the correct installation. This is not an instruction manual for the air conditioner. The instructions are written for each air conditioner individually and describe the functions of only one model. Here are clear descriptions of the main functions of air conditioners. They are very convenient to compare equipment (even from different price groups) and choose what you need, rather than overpay for unnecessary options.

A household air conditioner is, first of all, equipment that maintains the desired temperature in a room. Air conditioners are controlled by remote controls, which can be remote or stationary (wall-mounted, for example). The purpose of all remote control buttons is described in detail in the operating instructions for the air conditioner. But it can be understood intuitively by the icons and inscriptions near the remote control buttons.

Mode switch button

For different air conditioners, the sets of keys on the front panel of the remote control may vary greatly. But everyone has one button. Button - MODE. Pressing it successively turns on the main air conditioner modes in turn: “Cooling”, “Heating”, “Auto”, “Drying”, “Ventilation”.

Features of the main modes

"Cooling". The main function of the air conditioner. When it is turned on in the room, a sensor is installed in the indoor unit of the air conditioner that monitors temperature changes and sends a signal to the air conditioner when it changes. When working for cooling, by successively pressing the FAN button, you can change the fan performance, and therefore the cooling intensity.
"Heating". The task is to heat the air in the room. Since the air conditioner is a heat pump, when operating in this mode it will consume three times less energy than an electric heater. In this mode of operation of the air conditioner, you can also change the intensity of heating the room by changing the performance of the indoor unit fan by successively pressing the FAN button.
"Ventilation". The room air is forced through the indoor unit of the air conditioner without changing the temperature and is filtered. In this mode of operation of the air conditioner, air is recirculated. There is no entry or deletion here.
"Draining". In this operating mode of the air conditioner, the icon on the remote control will look like a drop. In the drying mode, excess moisture is removed. First, the air conditioner dries the air for ten minutes, then it does not work for 2 minutes, and finally it works for 5 minutes in intensive blowing mode. In dehumidification mode, by switching the fan speed, you can select the dehumidification speed.
In the "Auto" mode, the temperature and fan speed are automatically set to 22 degrees. The air conditioner itself selects between the “Cooling” and “Heating” modes. It supports the specified conditions. It is not possible to change any settings within the "Auto" mode.
SWING mode. Control of horizontal (in some models and vertical) blinds of the indoor unit.

Table of main operating modes

The table provides a brief description of the operating modes. This is like a cheat sheet on how to use the air conditioner in basic modes.

Additional modes

All air conditioners have the main modes shown in the table. They provide minimal comfort.

Now we’ll talk about the options that make each air conditioner unique in its own way, and how to use the air conditioner in additional modes.

Choose the ones you like, and the climate control store consultant will suggest the appropriate split model.

"Ionization". Enabling the mode implies saturating the room with negatively charged ions (anions). On average, an air conditioner produces up to 20,000 of them per square centimeter. This amount of anions is found only in environmentally friendly places. Anions have an antibacterial effect. The ionization function can be considered as an additional fine filter.

"Self-cleaning". When using this function, mold will never form in the air conditioner. The process lasts about half an hour: the blinds close and the indoor unit is purged, all moisture is removed, the heat exchanger heats up, dries, the air conditioner switches to FAN (Ventilation) mode, and the air entering the air conditioner takes away all the unpleasant odors.
Enrichment of air with oxygen, based on the uneven passage of gases through a polymer membrane.
"Additional filtering mode". Many models have additional filtration systems. For example, LG brought a plasma filter to the Russian market, Samsung brought a biopurification filter. Almost every brand has models with multi-stage filtration. A very useful option.
"Fresh air supply." The function in systems with wall units is rather advertising. A very small section of the tube through which air must enter the room. If this function is available, then it is used in air conditioners with multi-stage cleaning filters.
"Night The air conditioner switches to the optimal mode for sleep. The fan turns on in low noise mode. That is, its rotation speed decreases. In addition, when the air conditioner operates in cooling mode, the temperature rises by 1-3 degrees for several hours. And when operating in heating mode - goes down within a few hours.

"Timer". Allows you to turn on the air conditioner at a certain time (for example, when you arrive at work) and turn it off at a certain time.
"Forced cooling or heating." In some models the mode may be called TURBO, in others - JET COOL. The essence is the same - for half an hour (after pressing the corresponding button), the air conditioner operates at the minimum temperature at the maximum possible fan speed. Used for rapid cooling of the room.
I FEEL. In this mode, the temperature is measured not by the indoor unit sensor, but by the remote control sensor. The most comfortable conditions are created in the place where the remote control is located, i.e. next to the person.
"Clever Eye" I SEE - volumetric temperature scanning sensor. Monitors temperature and humidity throughout the room. The air conditioner, receiving information, adjusts the temperature by zone. I SEE prevents sudden temperature changes by synchronizing the operation of the fan and blinds.

Protection systems

Additional features increase comfort. In addition, manufacturers install protection and control systems on air conditioners.

"Defrosting (defrosting) the outdoor unit." The function turns on automatically when ice freezes on the outdoor unit. The split system starts heating the outdoor unit. Unfortunately, not all air conditioners have it. If the air conditioner you choose does not have it, then you can melt the ice on the outdoor unit by briefly turning on the cooling mode.
"Auto restart". The function of the air conditioner is to restore settings after power is restored during a power outage.
"Warm start" Protection against cold air flow when switching to heating mode. The indoor fan will not turn on until the refrigerant has warmed up. With this option, cold air cannot reach a person.
"Compressor protection".
"Self-diagnosis function". Failures are diagnosed by a microcircuit built into the indoor unit of the air conditioner. The type of malfunction can be determined by the error code or by the blinking indicator lights.
"Working at low temperatures." Air conditioners operate stably during the off-season (temperatures up to -7 degrees). If you want to be heated by air conditioning in winter, then it is worth purchasing an inverter. Many inverter models can operate for heating at an outside temperature of -15 degrees without loss of power. Air conditioners with an additional set for low temperatures can operate at temperatures below -60 degrees. But the price of heat pump systems is several times higher than that of conventional air conditioners.

If the remote control is lost. Turning on the air conditioner without using the remote control

There is another interesting feature of wall splits. They can be turned on in test mode, even if the remote control is lost. Under the front panel on the right side, covered with a plastic cover, there is an OPERATION or ON/OFF button. By pressing it, you can start the air conditioner without the remote control.

There is only one "but". When you press this button, some models turn on in the "Auto" mode, but most turn on in the mode in which they were working before turning off.

All modern air conditioners (from any price segment) have a complex and often overlapping set of functions: “Cooling”, “Heating”, “Drying”, “Ventilation”, “Timer on/off”, various filters... The difference between high-end models and simpler models - the percentage of defects in a batch of equipment and the service life guaranteed by the manufacturer. The choice of brand is also important. But that's a completely different story.

Air conditioning today is perhaps an integral part of the interior of any office, house, or apartment. It allows you to maintain optimal indoor climate conditions necessary for human life in different seasons of the year. As a rule, air conditioning systems are turned on using a special remote control, but there are times when at the most necessary moment this very remote control is not at hand.

Instructions

Carefully inspect the air conditioner and check if there is wiring for it. There are cases that when the old owners move out of their offices, they leave only a box in the room, and the necessary wires are removed or torn. If you are sure that your air conditioner is fully operational, perform the following steps.

Inspect the front of the air conditioner panel. Find a small straight plastic cover just below the curtains of the device that matches the color of the air conditioner itself. Take it from both sides (from different sides) with your fingers and gently lift it to the top. To do this, you need to press it a little and pull it up.

Examine the panel under the raised cover and find the button there. The button, depending on the model and manufacturer, can be located on the right or left. Often it has a backlight indicator. If there is a backlight, then when the air conditioner is operating, it will glow green or orange. Under the button, as a rule, there is an inscription either on off or operation.

Press the detected button and hold for a few seconds. The air conditioner should work. Check what kind of air is blowing from the curtains. If it is cold and you want warm, press the button again, but do not hold it with your finger.

You should know that using the front panel of the air conditioner you can turn on the device only in automatic mode, but to change the temperature you need a remote control.

How to turn on the air conditioner automatically? Most often, this question arises in several cases:

after a long period of inactivity;
if the remote control is broken (lost).

Let's look at situations in order when owners cannot figure out how to turn on the air conditioner on their own.

How to turn on an air conditioner without a remote control

Sometimes the remote control disappears somewhere, the batteries run out, or the remote control is broken. There is always a button to turn on the air conditioner! And it is located on the front part of the internal module under the curtains. The air conditioner switch is covered by a small cover made of the same plastic as the body. It needs to be carefully picked up and lifted.

The manual control panel is detected. The button can be illuminated. If the air conditioner is working properly, it lights up with a red or green indicator. The switch is called operation or on\off.

Press down on it and do not let go of your finger for a couple of seconds. You will hear a characteristic sound when the air conditioner is turned on. It means the air conditioner is turning on. If you want to start heating, you need to quickly press the button again.

The air conditioner starts automatically. And you can make changes to it only using the remote control.

How to turn on the air conditioner after a long period of inactivity

There is a certain procedure that you can perform yourself after a long period of inactivity or transportation.

Step-by-step instructions for turning on the air conditioner in the cold after inactivity:

Make sure that the temperature outside is above zero;
Turn off the air conditioner;
Check whether the external unit is dry and whether the radiator grille is intact;
Check the condition of the filters in the indoor module, clean them if necessary;
Check the condition of the remote control batteries;
Turn on the power, the sound when the air conditioner is turned on will notify you that it is starting;
If the room temperature is above 20 degrees, set the “cold” mode to the lowest temperature and the highest speed of rotation of the fan blades;
When really, really cold air comes out of the case, leave it running for a quarter of an hour, and in the meantime check the operation of the curtain and fan speeds;
Turn off using the remote control. Now the air conditioner can be used as usual.

If 10 minutes after the air conditioner automatically turns on, it is not cold, the air is blowing weakly or is noisy, you need to call the service department.

The air conditioner switching circuit is very simple; even inexperienced users can handle it. However, if during the test you have the slightest doubt about the operation of the device, immediately turn it off and call the experts.

Greetings to all visitors to the Air Conditioner website! Today I will tell you how to turn on the air conditioner without the remote control. It happens when you need to turn on the air conditioner, but the remote control is not at hand, or it is broken (the batteries are dead). A similar situation happens when moving - they call a repairman, he arrives at a half-empty apartment, but the remote control has already been taken away or it got lost during the move (usually people don’t think that before removing the device they will need to turn it on). To start the air conditioner you can use auxiliary button!

On the internal block of almost every wall-mounted split system there is one “magic” button, which is provided for such cases. It is located either on the visible part of the housing or under the “service” cover (under the one where the filters are located).

Often, this backup button can be used to enable two modes: “auto” mode and “cool” mode. Usually on the first short press buttons, the air conditioner starts automatically. If press the button a second time, then the cooling mode is activated. Pressing the button a third time, you turn off the air conditioner. Those. Function switching occurs cyclically. There is no need to hold this button for several seconds. First, try to switch with simple short presses (if the unit does not respond to short presses, then try holding the button while pressing).

In automatic mode, the “split” can be started in both heat and cold mode; depending on the temperature, it independently determines the mode. In forced cooling mode, it will only work on cold. IF THE TEMPERATURE IN THE ROOM IS SUFFICIENTLY LOW, THEN IT WILL NOT COOL!

It happens that when you press a button, a single mode is simply turned on/off (this can be either automatic mode or cooling mode).

What needs to be done to turn on the split system without a remote control

It is clear that to turn off the air conditioner you need to press the button again (probably twice). The only thing about turning it off is that it may not turn off right away - you still have to work for a few minutes to dry it out (up to 20 minutes). Afterwards you can disconnect the “condenser” from the power supply.

The downside of this inclusion is that it is impossible to regulate anything else. You select only the mode, and the air conditioner itself selects the optimal temperature and shaft speed.

In this way, you can turn on the air conditioner in a hotel if the owners are being cunning (to save electricity), claiming that the remote control is lost. True, in this case it will not be possible to set the most comfortable conditions for you, but, nevertheless, you can escape the heat. Under such circumstances, I do not recommend completely relying on the device’s algorithms. You can catch a cold while you sleep! Ask questions in the comments!